Need help with 7200 IDE and 10000 SATA
Please support our Storage advertiser: Programming Forums
 |
Need help with 7200 IDE and 10000 SATA Hiya Everyone!
I am trying to install two hard drives on my system. A 7200 rpm IDE drive and a 10000 rpm SATA drive. I want to load my OS off the 7200 and use the 10000 rpm drive for gaming. It's been about 5 years since I have built a computer and I am having some problems. If I set my IDE drive on primary IDE on the MoBo and then plug in the SATA drive, will I be able to do this without a problem? Can I run my OS off the 7200 and only load games on the 10000?
Any advice?
Bossou
I am trying to install two hard drives on my system. A 7200 rpm IDE drive and a 10000 rpm SATA drive. I want to load my OS off the 7200 and use the 10000 rpm drive for gaming. It's been about 5 years since I have built a computer and I am having some problems. If I set my IDE drive on primary IDE on the MoBo and then plug in the SATA drive, will I be able to do this without a problem? Can I run my OS off the 7200 and only load games on the 10000?
Any advice?
Bossou
Yep, no worries. Depending on the motherboard chipset, you may need to load SATA controller drivers in order for Windows to detect the SATA drive, but this should be done for you when you install the motherboard chipset drivers after installation of Windows (or you'll have a native SATA controller and require no drivers at all).
|
Similar Threads
Other Threads in the Storage Forum
- Installing ide hard drive with sata hard drive (Storage)
- ide 1, 2 SATA 1, 2 (Storage)
- ide as main having trouble with sata as a slave (Storage)
Other Threads in the Storage Forum
- Previous Thread: HDD + CD-RW on #1 causing BIOS problems?
- Next Thread: Question about making my own portable drive.
•
•
•
•
Views: 1400 | Replies: 1 | Currently Viewing: 1 (0 members and 1 guests)
Linear Mode
