 |  |  |  |  |  |  |  |
How to set a static IP
 |
•
•
Join Date: Aug 2005
Posts: 77
Reputation: 
Solved Threads: 1
Junior Poster in Training
Heya guys....
I need to add two machines to our domain. They're going to be streaming audio from two radio stations. The data is going to be uploaded to Liquid Compass, who is the company that managing our streams and what not.
Now, I need to assign a static IP for each of those machines. My question is, how do I go about assigning them the static IP's. I was told to go onto the domain controller and use the DNS mmc snap in to do this. But when I do this, the only things listed under DNS is Forward Lookup Zones, Reverse Lookup Zones, Root Hints, and Forwarders. I was originally under the impression that I would have to set a static IP under the DHCP snap in.
Anyway, I'm at a loss where to set this at. The Domain Controller is running Windows 2003 Server. Any advice would greatly be appreciated.
Thanks!
I need to add two machines to our domain. They're going to be streaming audio from two radio stations. The data is going to be uploaded to Liquid Compass, who is the company that managing our streams and what not.
Now, I need to assign a static IP for each of those machines. My question is, how do I go about assigning them the static IP's. I was told to go onto the domain controller and use the DNS mmc snap in to do this. But when I do this, the only things listed under DNS is Forward Lookup Zones, Reverse Lookup Zones, Root Hints, and Forwarders. I was originally under the impression that I would have to set a static IP under the DHCP snap in.
Anyway, I'm at a loss where to set this at. The Domain Controller is running Windows 2003 Server. Any advice would greatly be appreciated.
Thanks!
•
•
Join Date: Dec 2003
Posts: 2,414
Reputation:
Solved Threads: 123
Are you running a DHCP server in the mix, here?
What you have to do is add the addresses, along with the systems' MAC addresses, into the reserved address pool in the DHCP configuration. Then, if you have a specific hostname that you want to give those machines, you'd do that in the DNS server configuration. They're two different areas, and each have to be looked at. You were right, though-- it is done via the DHCP snap-in.
What you have to do is add the addresses, along with the systems' MAC addresses, into the reserved address pool in the DHCP configuration. Then, if you have a specific hostname that you want to give those machines, you'd do that in the DNS server configuration. They're two different areas, and each have to be looked at. You were right, though-- it is done via the DHCP snap-in.
Alex Cavnar, aka alc6379
•
•
Join Date: Aug 2005
Posts: 77
Reputation:
Solved Threads: 1
Junior Poster in Training
•
•
•
•
Originally Posted by alc6379
Are you running a DHCP server in the mix, here?
What you have to do is add the addresses, along with the systems' MAC addresses, into the reserved address pool in the DHCP configuration. Then, if you have a specific hostname that you want to give those machines, you'd do that in the DNS server configuration. They're two different areas, and each have to be looked at. You were right, though-- it is done via the DHCP snap-in.
Actually what I did to fix this, which was a lot simpler than I though it would be, was this...
I didn't even have to mess with anything on the server side. All I had to do was set the ip's on the two machines with IP's outside of the reserved pool of addresses for dhcp.
Since dhcp on our network has a pool of address's between, for example, 192.168.6.100 - 192.168.6.200.... All I had to do to give those two other machines a static ip was to set one with 98 and one with 99.
Follow me?
That was the easy way to do it.
•
•
Join Date: Dec 2003
Posts: 2,414
Reputation:
Solved Threads: 123
•
•
•
•
Originally Posted by Justin01
Follow me?
That was the easy way to do it.
What if you happened to reinstall the OS on one of those machines, or change a config? If you reserved the address on the DHCP server, you'd be hands-off on the TCP/IP configuration on that system. If you ever needed to change that IP address, you could do so server-side, and push through an IP address lease expiration.
It's some work on the front end, but it makes life a little easier on the back end. Both results are equally valid, though. Great job!
Alex Cavnar, aka alc6379
|
Similar Threads
- Static TCP/IP Setting not saving... (Networking Hardware Configuration)
- Set up static IP with AirPort on Windows (Networking Hardware Configuration)
- about static variable (Java)
- possible to have static *and* DHCP available? (XP) (Networking Hardware Configuration)
- Trying to set up wireless lan (Networking Hardware Configuration)
Other Threads in the Networking Hardware Configuration Forum
- Previous Thread: How do I connect two Ethernet Networks
- Next Thread: Need help reigning in my roommate's downloading
| Thread Tools | Search this Thread |
You need to join our community in order to build your list of favorite forums. You can visit the forum index for a listing of all forums.
Latest Networking Hardware Configuration Posts
Related Forum Features
802.11 802.11n bluetooth british broadband browserproblems bt connectionproblem connectivity cpu data desktop dual gigabyte hardware infrastructure internet memory network networking news program rdimm reliability riched20.dll routers server storage survey technology telecoms troubleshoot uk upgrade videoconferencing view virgin wireless wirelessnetworking
