| | |
High CPU Usage , Lagging
![]() |
•
•
Join Date: Feb 2006
Posts: 6
Reputation:
Solved Threads: 0
Hello everyone. I am in need of serious help. Usually I am always able to eliminate and narrow down the possibilities of a problem, and therefore fix it. But this time I'm at a loss.
My computer was running fine and then one day I shut it down (which is rare for me..I know..thats bad.) But anywho, I came back later that day started it up and thats when the trouble started. The computer would sit on the windows loading screen for over a minute, then it would eventually load. Now I seem to have high cpu usage and its very laggy. You can even tell thats its lagging just by moving the mouse around in circles you can see it almost "stick".
I have done the obvious. I have run the following programs:
Norton antivirus
Stinger
Housecall Online
Panda Active Scan Online
Ad-Aware
Spybot Search and Destroy
I found no viruses and a few spyware things I got rid of.
I also defragmented and ran SFC /Scannow
I tried to think of programs I may have just installed that may be conflicting with windows and uninstalled anything that I thought was recent.
I can also tell the computer is running laggy because when I am running absolutely no programs and go to watch an avi file on my computer, the audio skips (and sometimes video) which it wasn't doing before. I use to watch movies even when other programs were running and it ran fine.
Your next question would probably be what processes are running when cpu usage is high and what are they at. I went in and eliminated a bunch of stuff upon startup, however I DO have norton which takes up a lot of resources, but never caused this problem before. The only time I really see the cpu usage go high is when I go to open a folder or program. So not sure that the cpu usage being high is really the problem.
Other Information you may need:
Operating System: Xp Home Edition
OS service pack: Service pack 2
System Memory: 512MB
Video Adaptar: ATI RADEON 9550
Page File: 305MB used, 942MB available
Free Space: 16.6 GB
Temperatures:
Motherboard: 23C (73 F)
CPU: 49C (120F)
Aux: 26C (79F)
Cooling Fans:
CPU: 4167 RPM
Chasis: 2109 RPM
Processes Currently Running:
Shellmon.exe
iexplore.exe 9,000k
wmiprvse.exe
AOLHOS~1.exe
AOLServiceHost.exe
symlcsvc.exe
NAVAPSVC.EXE
taskmgr.exe
spoolsv.exe
explorer.exe 7,912k
CCSETMGR.exe
ati2evxx.exe
dcfssvc.exe
CCPROXY.exe
aoltpspd.exe
aoltsmon.exe
ISSVC.exe
svchost.exe
AOLacsd.exe
svchost.exe
svchost.exe 27,900k
AOLDial.exe
svchost.exe
jusched.exe
SPBBCSvc.exe
svchost.exe
svchost.exe
ati2evxx.exe
lsass.exe
services.exe
winlogon.exe
SNDSrvc.exe
csrss.exe
smss.exe
nvsvc32.exe
NPFMNTOR.EXE
CCEVTMGR.EXE
CCAPP.EXE 18,524k
wdfmgr.exe
System
System Idle Process
Seems like a lot of process running to me. However a lot have to do with windows and Norton antivirus/firewall. All this stuff was running before and never had this problem. So shouldn't have to do with these processes running.
I can still run the computer and open programs ect. But I know something is wrong. Its lagging and not acting like it was before shut down.
Any suggestions, ideas? If you need any more information. Please let me know. Thanks in advance for any help you can provide.
My computer was running fine and then one day I shut it down (which is rare for me..I know..thats bad.) But anywho, I came back later that day started it up and thats when the trouble started. The computer would sit on the windows loading screen for over a minute, then it would eventually load. Now I seem to have high cpu usage and its very laggy. You can even tell thats its lagging just by moving the mouse around in circles you can see it almost "stick".
I have done the obvious. I have run the following programs:
Norton antivirus
Stinger
Housecall Online
Panda Active Scan Online
Ad-Aware
Spybot Search and Destroy
I found no viruses and a few spyware things I got rid of.
I also defragmented and ran SFC /Scannow
I tried to think of programs I may have just installed that may be conflicting with windows and uninstalled anything that I thought was recent.
I can also tell the computer is running laggy because when I am running absolutely no programs and go to watch an avi file on my computer, the audio skips (and sometimes video) which it wasn't doing before. I use to watch movies even when other programs were running and it ran fine.
Your next question would probably be what processes are running when cpu usage is high and what are they at. I went in and eliminated a bunch of stuff upon startup, however I DO have norton which takes up a lot of resources, but never caused this problem before. The only time I really see the cpu usage go high is when I go to open a folder or program. So not sure that the cpu usage being high is really the problem.
Other Information you may need:
Operating System: Xp Home Edition
OS service pack: Service pack 2
System Memory: 512MB
Video Adaptar: ATI RADEON 9550
Page File: 305MB used, 942MB available
Free Space: 16.6 GB
Temperatures:
Motherboard: 23C (73 F)
CPU: 49C (120F)
Aux: 26C (79F)
Cooling Fans:
CPU: 4167 RPM
Chasis: 2109 RPM
Processes Currently Running:
Shellmon.exe
iexplore.exe 9,000k
wmiprvse.exe
AOLHOS~1.exe
AOLServiceHost.exe
symlcsvc.exe
NAVAPSVC.EXE
taskmgr.exe
spoolsv.exe
explorer.exe 7,912k
CCSETMGR.exe
ati2evxx.exe
dcfssvc.exe
CCPROXY.exe
aoltpspd.exe
aoltsmon.exe
ISSVC.exe
svchost.exe
AOLacsd.exe
svchost.exe
svchost.exe 27,900k
AOLDial.exe
svchost.exe
jusched.exe
SPBBCSvc.exe
svchost.exe
svchost.exe
ati2evxx.exe
lsass.exe
services.exe
winlogon.exe
SNDSrvc.exe
csrss.exe
smss.exe
nvsvc32.exe
NPFMNTOR.EXE
CCEVTMGR.EXE
CCAPP.EXE 18,524k
wdfmgr.exe
System
System Idle Process
Seems like a lot of process running to me. However a lot have to do with windows and Norton antivirus/firewall. All this stuff was running before and never had this problem. So shouldn't have to do with these processes running.
I can still run the computer and open programs ect. But I know something is wrong. Its lagging and not acting like it was before shut down.
Any suggestions, ideas? If you need any more information. Please let me know. Thanks in advance for any help you can provide.
It could be a problem with your hard drive. If you have a bad cluster, it can make windows really slow like you say. To do this click start menu -> run and then type cmd to bring up the command prompt and with in the command prompt enter CHKDSK C: /F and then hit enter. It should say that the drive is in use and ask if you want to run it next time your restart your computer and hit Y for yes and then restart your compter and it should run the program.
•
•
Join Date: Feb 2006
Posts: 399
Reputation:
Solved Threads: 14
It could be that something has enabled itself at start up that is slowing down your computer, if you hadn't shut it down for a while this may be why the problem is only occouring now. To try and fix this go to the start menu then run and type in msconfig. Set it to start up in diagnoistoc mode to see if this solves the problem. If this does then change it back to normal start up and go into msconfig again.
This will show you how your computer is starting up, what process are starting up and what programs are starting up when windows first loads. Make sure you are only running the programs you need to at start up but dont disable processes unless you are 100% sure that they arnt relevant to any programs you are using, this could be the cause of your problem. Also if you are using norton go back and havn't shut down for a while it could be adding information to that on both the start up and shutdown. Hope this helps.
This will show you how your computer is starting up, what process are starting up and what programs are starting up when windows first loads. Make sure you are only running the programs you need to at start up but dont disable processes unless you are 100% sure that they arnt relevant to any programs you are using, this could be the cause of your problem. Also if you are using norton go back and havn't shut down for a while it could be adding information to that on both the start up and shutdown. Hope this helps.
•
•
Join Date: Feb 2006
Posts: 6
Reputation:
Solved Threads: 0
I went and rank chkdsk like suggested but that didnt help. the main problem I seem to be having now is with my audio. I considered that maybe I need to update my driver, but again..this wasn't happening before shutdown. My audio was fine. I will start the computer in diagnostic mode like suggested and see if it does it then. I can't play videos because the audio is choppy and skips. Its not just with video files, also happens with mp3's and other computer wav files.
Audio (just in case your curious)
VIA AC'97 Audio Controller (WDM)
VIA Technoligies, Inc.
Driver Version: 5.1.2535.0
I also read that SP2 and VIA AC'97 do not work well together. Some people reinstalled windows and didn't install SP2 and it fixed it. So I uninstalled SP2 and that didn't help.
Audio (just in case your curious)
VIA AC'97 Audio Controller (WDM)
VIA Technoligies, Inc.
Driver Version: 5.1.2535.0
I also read that SP2 and VIA AC'97 do not work well together. Some people reinstalled windows and didn't install SP2 and it fixed it. So I uninstalled SP2 and that didn't help.
•
•
Join Date: Feb 2006
Posts: 6
Reputation:
Solved Threads: 0
I started the computer in diagnostic mode, however I'm not able to check and see if the audio works because in diagnostic mode it says "no sound device detected on system". So in diagnostic mode I'm assuming the driver does not load. I don't know why all of a sudden the sound would start acting this way after restart. I don't know if I should update my sound driver or not and if so, I don't know where to look. I was unable to find any updates higher than the version i have now. I have tried playing the video files/mp3's on several different programs, so its not just Nero that does it. As far as the processes running, I've checked all the ones running and they are all neccesary to running Norton and Windows. They were all running before the problem started as well. I don't know what could be running to make the sound be doing this. I'm at a loss. The last thing I want to do is reinstall windows. Its a real pain. Any other suggestions?
Dude, I hate to say it, but I wouldnt doubt one bit that ya have a virus/extreme malware. I'd reccomend that ya download HijackThis (a diagnostic software), rewrite the problem in a thread in the 'Virus, Spywares, and other nasties' category, and post a HijackThis log into your thread. Help with the HJT can be found at the top of:
http://www.daniweb.com/techtalkforums/thread28196.html
Thanks. Now you're prly thinking that since ya ran Norton/etc, you're protected, but from what I've noticed (from helping/reading posts here), the majority of the time, virus scans didnt catch the virus. Jus trust me on this one
http://www.daniweb.com/techtalkforums/thread28196.html
Thanks. Now you're prly thinking that since ya ran Norton/etc, you're protected, but from what I've noticed (from helping/reading posts here), the majority of the time, virus scans didnt catch the virus. Jus trust me on this one
Hmm not a bad plan I guess...Have ya used CCleaner recently?
It can cut down on alotta stuff.
Edit: (and I hate to press the issue, but have ya tried Ewido? :o it's the only malware scanner Ive used that's caught a good number of stuff,, but if you're sure ya have none on you're computer..)
The only reason I keep mentioning it (I apolegize) is because of what Chris5126 said about startup programs. Even msconfig doesnt show all processes...some are hidden.
It can cut down on alotta stuff.
Edit: (and I hate to press the issue, but have ya tried Ewido? :o it's the only malware scanner Ive used that's caught a good number of stuff,, but if you're sure ya have none on you're computer..)
The only reason I keep mentioning it (I apolegize) is because of what Chris5126 said about startup programs. Even msconfig doesnt show all processes...some are hidden.
![]() |
Similar Threads
- High CPU Usage (Windows NT / 2000 / XP)
- High CPU usage iexplorer.exe (Windows NT / 2000 / XP)
- Svchost.exe - high CPU usage (Viruses, Spyware and other Nasties)
- Re: High CPU Usage , Lagging (Viruses, Spyware and other Nasties)
- high cpu usage (Motherboards, CPUs and RAM)
- Computer: Slow between commands & High CPU usage (Windows NT / 2000 / XP)
- High CPU usage after installing SP2 (Windows NT / 2000 / XP)
- High CPU usage - ran Hijack what do you think (Viruses, Spyware and other Nasties)
Other Threads in the Windows NT / 2000 / XP Forum
- Previous Thread: XP Not Recognising HD
- Next Thread: No Audio Device. No Active Mixer. But Windows Audio is started there's sound in WMP
| Thread Tools | Search this Thread |
.net 2007 2010 a.exe address apache appstore arm auto automatically black blue book bsod bulletin canonical cellphones chkdsk codeplex collaboration computer crash cursor deployment deployments desktop desktops dns dotnetnuke drive eartlink error errors explorer fax features folder fontmanagers format framework intel internet interoperability killprocess laptop linux load login mac memory microsoft monitor motionle1600 netbooks novell nvidia open operatingsystems osx palm partition patch printer product program proxy remotedesktop repair replacingraiddrive retrieve screen security sharepoint simplifiedchinese sitetositevpn slowperformance technology unreadable update usb verizon videodrivers videogames virus vista visual vpn vulnerability wab webos weecam win win32/heur windows windows7 windowsxp windowsxpnotstartingup. worm xp xpde






