| | |
printer problem
![]() |
•
•
Join Date: Jun 2005
Posts: 75
Reputation:
Solved Threads: 0
hi
all of a sudden and without any tweaking or anything of the sort, i can't print anything on a previously perfectly good printer, and i get a message asking me if i want to install a printer.
the driver is installed, i've checked that, and i've tried adding the same printer again in control panel but i get this message;
'operation could not be completed. The print spooler service is not running'
Is this some sort of port problem?
as i say, before the printer was working just fine and to my knowledge i haven't altered any settings
i'm running windows xp, with a dell colour printer 720.
grateful for any help
hetixo
all of a sudden and without any tweaking or anything of the sort, i can't print anything on a previously perfectly good printer, and i get a message asking me if i want to install a printer.
the driver is installed, i've checked that, and i've tried adding the same printer again in control panel but i get this message;
'operation could not be completed. The print spooler service is not running'
Is this some sort of port problem?
as i say, before the printer was working just fine and to my knowledge i haven't altered any settings
i'm running windows xp, with a dell colour printer 720.
grateful for any help
hetixo
•
•
Join Date: Jun 2005
Posts: 75
Reputation:
Solved Threads: 0
i have managed to get past the print spooler problem but now when i try to re-install the printer i get this message in hardware wizard;
'an error occurred during the installation of this device. the specified print monitor is unknown.'
i must admit i'm stumped. the device manager is saying that all the usb ports are working correctly, the driver is installed and whichever usb port i try i get the same message.
'an error occurred during the installation of this device. the specified print monitor is unknown.'
i must admit i'm stumped. the device manager is saying that all the usb ports are working correctly, the driver is installed and whichever usb port i try i get the same message.
•
•
Join Date: Sep 2006
Posts: 1
Reputation:
Solved Threads: 0
go to start ---> run ---> and type in "cmd" . hit enter.
after that type "sc config spooler depend= RPCSS" that exact way. make sure all of your spaces are right, etc.
that should fix the problem.
after that type "sc config spooler depend= RPCSS" that exact way. make sure all of your spaces are right, etc.
that should fix the problem.
•
•
•
•
hi
all of a sudden and without any tweaking or anything of the sort, i can't print anything on a previously perfectly good printer, and i get a message asking me if i want to install a printer.
the driver is installed, i've checked that, and i've tried adding the same printer again in control panel but i get this message;
'operation could not be completed. The print spooler service is not running'
Is this some sort of port problem?
as i say, before the printer was working just fine and to my knowledge i haven't altered any settings
i'm running windows xp, with a dell colour printer 720.
grateful for any help
hetixo
•
•
Join Date: Jun 2005
Posts: 75
Reputation:
Solved Threads: 0
•
•
•
•
go to start ---> run ---> and type in "cmd" . hit enter.
after that type "sc config spooler depend= RPCSS" that exact way. make sure all of your spaces are right, etc.
that should fix the problem.
thanks for the reply. I've since installed another printer. If i follow your instructions will i then interfere with my current printer settings?
It's kind of got to that point where i'd rather not meddle with it if it's going to complicate things now i have a working set up. However, i will no what to do if this happens again.
thanks again
hetixo
•
•
Join Date: Jun 2005
Posts: 75
Reputation:
Solved Threads: 0
•
•
•
•
go to start ---> run ---> and type in "cmd" . hit enter.
after that type "sc config spooler depend= RPCSS" that exact way. make sure all of your spaces are right, etc.
that should fix the problem.
hey
thanks for the reply. If i follow those instructions will it interfere with my current printer settings? I've installed a different printer and I'm happy with the way everything is working at the moment.
However, i'll keep your instructions handy in case it happens again.
thanks
hetixo
![]() |
Similar Threads
- Extreme Printer Problem (OS X)
- Shared Printer Problem (Windows NT / 2000 / XP)
- Persistent Printer Problem Running Windows XP (Windows NT / 2000 / XP)
- Help With Printer Problem (Windows NT / 2000 / XP)
Other Threads in the USB Devices and other Peripherals Forum
- Previous Thread: HP Wireless Laser Mouse Problem
- Next Thread: Mic Problems
| Thread Tools | Search this Thread |
advancedmicrodevices amd analogdevices apple at&t buffett cellphones chips chipstocks crm directtv dish dolcegmail firewire gadget gmail hacking handhelddevices hardware ieee intel logitech mice microchips microndevices mouse news obama openliven peripherals photoframe plug-in port printer removabledevices satellite security semiconductors semiconductorstocks specification stocks sugarcrm technology television texasinstruments text usb usb3.0 usbkey xeon





