Locked Hard Drive

Reply

Join Date: Jul 2006
Posts: 1
Reputation: TSmith9356 is an unknown quantity at this point 
Solved Threads: 0
TSmith9356 TSmith9356 is offline Offline
Newbie Poster

Locked Hard Drive

 
0
  #1
Jul 19th, 2006
I installed a hard drive to use for a slave but it is locked. I have a program to unlock it but the computer do not show the slave hard drive any where. Every thing is pluged in good I am aelectrician so I know how to hook every thing up but I not really sure with getting the computer to find hard drive.
Reply With Quote Quick reply to this message  
Join Date: Nov 2006
Posts: 3
Reputation: SpeedRacer69 is an unknown quantity at this point 
Solved Threads: 0
SpeedRacer69's Avatar
SpeedRacer69 SpeedRacer69 is offline Offline
Newbie Poster

Re: Locked Hard Drive

 
0
  #2
Nov 15th, 2006
check to ensure that the jumpers are correctly configured as a slave hard disk...
Reply With Quote Quick reply to this message  
Join Date: May 2006
Posts: 1,947
Reputation: Chaky is on a distinguished road 
Solved Threads: 43
Chaky's Avatar
Chaky Chaky is offline Offline
Posting Virtuoso

Re: Locked Hard Drive

 
0
  #3
Nov 19th, 2006
Also, make sure that:

- HD is recognized in BIOS
- HS settings in BIOS are correct (LBA)


Some HDs have jumpers for different number of C/H/S, try changing those.
Last edited by Chaky; Nov 19th, 2006 at 2:51 pm.
I say what I see. If you find my words offensive, then you find my reality offensive.
Reply With Quote Quick reply to this message  
Join Date: Aug 2006
Posts: 45
Reputation: FES is an unknown quantity at this point 
Solved Threads: 1
FES FES is offline Offline
Light Poster

Re: Locked Hard Drive

 
0
  #4
Feb 3rd, 2007
Try this:
Unplug the power cord from new HD.
Check - Verify jumper is set to slave.
Leave Unplugged. Shut down computer. Wait a couple of minutes.
Restart computer. Clear all Cache, Cookies and Files from Internet Explorer and empty Recycle Bin.
Shut down computer. Again, wait 2 or 3 minutes.
Plug back in the new HD. Ensure the ribbon cable is aligned correctly with pin 1 on the connector. Restart computer. PnP should find, identify and logged the new HD. If not, confirm new HD is spinning and you do not have any conflict in Device Manager. Good Luck.
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Storage Forum
Thread Tools Search this Thread



About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC