I have a HP LC2000 that has message: istat=0a: LSS_PAR on ha=1 sist0=41

Reply

Join Date: Aug 2006
Posts: 2
Reputation: dmksh is an unknown quantity at this point 
Solved Threads: 0
dmksh dmksh is offline Offline
Newbie Poster

I have a HP LC2000 that has message: istat=0a: LSS_PAR on ha=1 sist0=41

 
0
  #1
Aug 4th, 2006
I have a HP Netserver 2000 running SCO UNIX 5.0.6. I get the message: istat=0a: LSS_PAR on ha=1 sist0=41 sist1=00 !!!! dstat =81 on ha=1 has DS_OPC while WAIT DISCONNECT, rp=c014f8co dsp=FD on path=1, newdsp=FD064600 WARNING: Parity Error MSG OUT=00000006 Failed, 1code=80000002 on ha=1 id warning:”RESERVE” command timed out 1201 seconds after start on ha aborting command on ha=1 id=2 lun=0 tag=00 cpu2:istat=0a: LSSn ha=1 sist0=41 sist1=00!!!! cpu2:dstat=81 on ha=1 has DS_OPC while at WAIT DISCONNECT, rp=c014f8co cpu2:on path=1, new dsp=fd064600 I have changed motherboard, tape drive, (2) processors, SCSI controller for tape drive, tape drive software, and memory. The only thing I have not changed is the hard drives. The system freezes up and does not back up. System runs fine during the day. The log time is around 7PM when this error occurs. Does this every 2-3 days. A reboot takes care of the lockup. The above message is on the console. I have Googled parts of the error message and seems to be pointing to a system BIOS and SCSI Symbios problem. Does anyone have any suggestions?
Reply With Quote Quick reply to this message  
Join Date: Mar 2006
Posts: 4,158
Reputation: happygeek is on a distinguished road 
Solved Threads: 13
Administrator
Staff Writer
happygeek's Avatar
happygeek happygeek is offline Offline
He's The Daddy

Re: I have a HP LC2000 that has message: istat=0a: LSS_PAR on ha=1 sist0=41

 
0
  #2
Aug 5th, 2006
Hi dmksh, I think you have posted this in the wrong forum mate, this is for DaniWeb related stuff only. Sounds like you need to find the most appropriate sub-forum in the Linux and Unix section of Tech Talk.
Davey Winder
Information Security Journalist of the Year
www.happygeek.com
Follow me on Twitter: @happygeek
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the DaniWeb Community Feedback Forum
Thread Tools Search this Thread



About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC