Networking Hardware...

NETGEAR DG834G - help?

Thread Solved

•

Join Date: Jun 2006

Posts: 869

Reputation: darrenw89 is an unknown quantity at this point

Solved Threads: 11

darrenw89

Offline

Practically a Posting Shark

NETGEAR DG834G - help?

Aug 8th, 2006

hi guys,

just received new netgear dg834g from aol, aol dont tell you the ip address of the router, as they want you to use their software to install it, however does anyone here know the ip address to setup the netgear dg834g, would be very greatfull - cheers guys

darren

•

Join Date: Jul 2006

Posts: 189

Reputation: zelkea is an unknown quantity at this point

Solved Threads: 11

zelkea

Offline

Junior Poster

Re: NETGEAR DG834G - help?

Aug 8th, 2006

Hey Darren,
If your computer is hooked up to the router go to start->run-> type "CMD" and press enter. The type in ipconfig the default gateway will be the IP address to your router, which is usually 192.168.1.1. To access your router browse to http://192.168.1.1 or replace the 192… with whatever the default gateway is.

AJZ

•

Join Date: Jul 2006

Posts: 189

Reputation: zelkea is an unknown quantity at this point

Solved Threads: 11

zelkea

Offline

Junior Poster

Re: NETGEAR DG834G - help?

Aug 8th, 2006

Here is a link to possible default passwords for your netgear if you don't have it. http://cirt.net/cgi-bin/passwd.pl?me...en&ven=Netgear

AJZ

•

Join Date: Jun 2006

Posts: 869

Reputation: darrenw89 is an unknown quantity at this point

Solved Threads: 11

darrenw89

Offline

Practically a Posting Shark

Re: NETGEAR DG834G - help?

Aug 9th, 2006

•

Originally Posted by zelkea

Here is a link to possible default passwords for your netgear if you don't have it. http://cirt.net/cgi-bin/passwd.pl?me...en&ven=Netgear

AJZ

cheers mate, owe you one, but its says it needs to be configured over telnet?

4. NetgearProductDG834GVersionMethodtelnetUser ID(none)PasswordzebraLevelAdministratorNotes

•

Join Date: Jul 2006

Posts: 189

Reputation: zelkea is an unknown quantity at this point

Solved Threads: 11

zelkea

Offline

Junior Poster

Re: NETGEAR DG834G - help?

Aug 9th, 2006

Doh I didn't look close enough at that page the top few looked right can't win them all right :cheesy: .... I just looked up your router on Netgears website (I know this one will be correct) the username is "admin" and the default password is "password". Here is a link to the manuals if needed http://kbserver.netgear.com/inquira/...striction=docs.

AJZ

•

Join Date: Jun 2006

Posts: 869

Reputation: darrenw89 is an unknown quantity at this point

Solved Threads: 11

darrenw89

Offline

Practically a Posting Shark

Re: NETGEAR DG834G - help?

Aug 9th, 2006

•

Originally Posted by zelkea

Doh I didn't look close enough at that page the top few looked right can't win them all right :cheesy: .... I just looked up your router on Netgears website (I know this one will be correct) the username is "admin" and the default password is "password". Here is a link to the manuals if needed http://kbserver.netgear.com/inquira/...striction=docs.

AJZ

nice one mate!!! found out the ip off of the link you sent, 192.168.0.1 , and of course `admin` and `password`. owe you one!

darren

•

Join Date: May 2007

Posts: 4

Reputation: sali1981 is an unknown quantity at this point

Solved Threads: 1

sali1981

Offline

Newbie Poster

Re: NETGEAR DG834G - help?

May 16th, 2007

hi all
i need help my isp has NETGEAR DG834G router and i dont have password or username and i tried all default passwords and failed .
the problem is this word always appears to me (THIS SITE IS BLOCKED BY NETGEAR FIREWALL).which is a very silly something . is there any solution for that thing?
thanks

•

Join Date: May 2007

Posts: 4

Reputation: sali1981 is an unknown quantity at this point

Solved Threads: 1

sali1981

Offline

Newbie Poster

Re: NETGEAR DG834G - help?

May 16th, 2007

i have a problem
my isp has NETGEAR DG834G router and always this message appears to me website blocked by netgear firewall and i dont have the pasword or username and i tried all the defaults and failed
any one could help?
is there any solution?
thanks

•

Join Date: Jul 2006

Posts: 189

Reputation: zelkea is an unknown quantity at this point

Solved Threads: 11

zelkea

Offline

Junior Poster

Re: NETGEAR DG834G - help?

May 16th, 2007

Hey Sali1981,
Your only solution is to reset your firewall to the default factory settings so you can log in to make changes to your firewall, the steps to do so are below:

Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
Release the button.
Wait for the router to reboot.
Log in with the default password.

If the router was not cleared, try these additional steps AFTER the router has finished rebooting.

Unplug the router's power.
Press and hold the reset button. While the button is held down, reconnect router's power.
Continue to hold the reset button for 20 seconds after reconnecting the power.
Wait for the router to reboot.
Log in with the default password. The default username is admin and the password is either password, 1234, or admin.

Hope this helps,
AJZ

•

Join Date: May 2007

Posts: 4

Reputation: sali1981 is an unknown quantity at this point

Solved Threads: 1

sali1981

Offline

Newbie Poster

Re: NETGEAR DG834G - help?

#10

May 16th, 2007

the problem is i havenot the router , the router the router is at my isp. So i cannot reset the router is there any other solution
thanks
during writing this thread when i press on submit reply thefollowing messag appears to me WEBSITE BLOCKED BY NETGEAR FIREWALL this is the cause that i wrote the message help twice iam sorry
thanks