| | |
Occasional White Streaks (noise bars) in LCD Monitor
![]() |
•
•
Join Date: Apr 2005
Posts: 13
Reputation:
Solved Threads: 0
Hello forum
I just purchased a new LCD wide screen 24 inch monitor to replace the 19 inch CRT I had. The new wide screen is a Samsung syncmaster 245BW and I have installed the proper drivers for the monitor in Windows XP sp2.
I periodocally see horizontal white streaks (noise bars) starting from the left side of the monitor and traveling towards the right side. It sometimes happens if the monitor is only showing the destop but most often happens when I am watching a full screen video.
It doesn't matter if I am using analogue mode or digital mode.
According to the manual, there is an adjustment called "fine" that is supposed to align the phase of the internal pixel clock to the incoming horizontal sync and it is supposed to get rid of these "noise bars". But when I tweak this adjustment, it doesn't seem to help.
I have several electric/electronic devices located no more than three and a half feet from the monitor such as a UPS, a sub woofer, a USB external hard drive, and a wide screen TV is located about four feet away. Is it possible I am getting interference from one of these devices?
My main question would be, Are white streaks a common problem with LCD flat screen monitors? Is anybody else out there having similar problems? Does anybody have any suggestions?
I didn't have any problems with the old CRT 19 inch monitor I had located in the same spot.
Thanks in advance,
Roy
I just purchased a new LCD wide screen 24 inch monitor to replace the 19 inch CRT I had. The new wide screen is a Samsung syncmaster 245BW and I have installed the proper drivers for the monitor in Windows XP sp2.
I periodocally see horizontal white streaks (noise bars) starting from the left side of the monitor and traveling towards the right side. It sometimes happens if the monitor is only showing the destop but most often happens when I am watching a full screen video.
It doesn't matter if I am using analogue mode or digital mode.
According to the manual, there is an adjustment called "fine" that is supposed to align the phase of the internal pixel clock to the incoming horizontal sync and it is supposed to get rid of these "noise bars". But when I tweak this adjustment, it doesn't seem to help.
I have several electric/electronic devices located no more than three and a half feet from the monitor such as a UPS, a sub woofer, a USB external hard drive, and a wide screen TV is located about four feet away. Is it possible I am getting interference from one of these devices?
My main question would be, Are white streaks a common problem with LCD flat screen monitors? Is anybody else out there having similar problems? Does anybody have any suggestions?
I didn't have any problems with the old CRT 19 inch monitor I had located in the same spot.
Thanks in advance,
Roy
Last edited by rrssss; Jun 4th, 2007 at 2:29 pm.
•
•
Join Date: Apr 2007
Posts: 117
Reputation:
Solved Threads: 2
Do you have an onboard graphics caed or a plug in? If it's an onboard graphics then you should go to the manufactuers' web site and do an update for it.Most LCD monitors don't have that problem, it sounds like a trace peoblem and the update may take care of it.Most noise patterns are verial lines, with your's it sounds as though they are horzonal and that is trace problems.
•
•
Join Date: Apr 2005
Posts: 13
Reputation:
Solved Threads: 0
Thanks Dewabo,
My monitor is now malfunctioning in an additional way. Whenever I open up certain windows such as "my documents", the monitor fluctuates from light to dark along with other distortions (whenever I use certain pre-set modes such as text mode, Internet mode, game mode, etc).
I'm afraid I'm going to have to see about getting it exchanged for another one since I have 30 days to do it from the store I bought it from.
To answer you question, however, I have an AGP video card from ATI, the 800X. The horizontal streaks also appear in Linux (I have a triple boot configuration with Windows and three distributions of Linux installed).
Roy
My monitor is now malfunctioning in an additional way. Whenever I open up certain windows such as "my documents", the monitor fluctuates from light to dark along with other distortions (whenever I use certain pre-set modes such as text mode, Internet mode, game mode, etc).
I'm afraid I'm going to have to see about getting it exchanged for another one since I have 30 days to do it from the store I bought it from.
To answer you question, however, I have an AGP video card from ATI, the 800X. The horizontal streaks also appear in Linux (I have a triple boot configuration with Windows and three distributions of Linux installed).
Roy
Last edited by rrssss; Jun 5th, 2007 at 7:34 am. Reason: clarity
![]() |
Similar Threads
- DVI on New LCD Monitor But working on Old Mobo - Compatiblity Problems? (Monitors, Displays and Video Cards)
- What is the best LCD monitor to buy (Monitors, Displays and Video Cards)
- LCD Monitor is not works then hibernates and doesn't respond. (Monitors, Displays and Video Cards)
- LCD Monitor text looks fuzzy (Monitors, Displays and Video Cards)
- LCD Monitor screen flickering white?? (Monitors, Displays and Video Cards)
Other Threads in the Monitors, Displays and Video Cards Forum
- Previous Thread: working laptop and working screen but no image..
- Next Thread: Geforce2 MX400 Card -- no signal to display
| Thread Tools | Search this Thread |
Tag cloud for Monitors, Displays and Video Cards





