2 new CAD/3D PCs Wont POST

Reply

Join Date: Jun 2007
Posts: 4
Reputation: jonny5 is an unknown quantity at this point 
Solved Threads: 0
jonny5 jonny5 is offline Offline
Newbie Poster

2 new CAD/3D PCs Wont POST

 
0
  #1
Jun 19th, 2007
Hey
I am building two 3d/CAD machines.
Intel Core 2 Duo 2.4 ghz
Intel D955XBK MOBO with Crossfire
Seagate 500gb SATA 14 mb
Maxtor 40 gb hd
550w dual fan power supply
Kingston KVR667D2N5 1 gb x8
Masscool CPU fan with copper pipes
Samsung Litescribe DVD_RW
nVidia GeForce 6600LE 512 mb

I have 1 stick of ram plugged in, the 20 pin power cord, the 2+2 powercord that goes with the 20 pin, and a seperate 2+2 cord that plugs in next to the processor. I also have the CPU and GPU in the MoBO. BUT...No post. The fans all work, the mobo is OUT OF THE CASE on an anti-static surface. Also, when i take out the ram or take off the GPU, i get no beeps. The board has a built in speaker on the board. But i get nothing. Even if i take out the memory. I got the boards from www.geeks.com and it seems like there is No BIOS whatsoever. Almost like i either have to burn bios onto the board, or its a bad board. The thing is, this would be boards 3 and 4 of this specific intel type that hasent worked for me. Any ideas as to the location of the problem? Thanks in advance.

JOn
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 4
Reputation: edudmurd11 is an unknown quantity at this point 
Solved Threads: 0
edudmurd11 edudmurd11 is offline Offline
Newbie Poster

Re: 2 new CAD/3D PCs Wont POST

 
0
  #2
Jul 18th, 2007
i have the same exact problem except i am using a 940 Pentium d processor. when i hit power all i get is a fans running and i know the hard drives are spinning, but i don't get any display from the video card, its like it doesn't know its there, granted yes it is a very old video card, does that make a difference is fits onto the board? Did you find a fix, if so what was it?
Thanks in advance!
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 4
Reputation: edudmurd11 is an unknown quantity at this point 
Solved Threads: 0
edudmurd11 edudmurd11 is offline Offline
Newbie Poster

Re: 2 new CAD/3D PCs Wont POST

 
0
  #3
Jul 18th, 2007
o yeah i was looking at supported possessors to check myself and i don't believe that your processor is supported.
Reply With Quote Quick reply to this message  
Join Date: Jul 2007
Posts: 4
Reputation: edudmurd11 is an unknown quantity at this point 
Solved Threads: 0
edudmurd11 edudmurd11 is offline Offline
Newbie Poster

Re: 2 new CAD/3D PCs Wont POST

 
0
  #4
Jul 18th, 2007
Reply With Quote Quick reply to this message  
Join Date: Jun 2007
Posts: 4
Reputation: jonny5 is an unknown quantity at this point 
Solved Threads: 0
jonny5 jonny5 is offline Offline
Newbie Poster

Re: 2 new CAD/3D PCs Wont POST

 
0
  #5
Jul 19th, 2007
I was told by imfamous geeks.com that it was supported.. I questioned it myself, but unfortunatlly i trusted them. Even if the CPU wasent supported, i should get some sort of warning beeps... I thought that it could have been a board where you have to flash BIOS yourself..IE Builder board... I purchased two Asus 60 dollar boards and they work great. the PCs are up and running, looking real nice in their translucent cases
Reply With Quote Quick reply to this message  
Reply

This thread is more than three months old.
Perhaps start a new thread instead?
Message:



Similar Threads
Other Threads in the Troubleshooting Dead Machines Forum
Thread Tools Search this Thread



Tag cloud for Troubleshooting Dead Machines
About Us | Contact Us | Advertise | DaniWeb | Acceptable Use Policy | RSS Feed

©2003 - 2009 DaniWeb® LLC