| | |
pc only starts when i flash the bios and then stops
![]() |
•
•
Join Date: Nov 2007
Posts: 2
Reputation:
Solved Threads: 0
one day i came home from work and my monitor's screen was black and the computer was still on, so i restarted it, nothing still a black screen, so i tried restarting it again nothing, so i opened it and flashed the bios, and it started, that allowed me to go to the bios setup, i exited and let it to continue to load, it got to the windows loading screen and went black screen again, i tried it again but wouldn't even make it past the initinal startup screen couldn't even get into the setup, i left it alone for a couple days, and tried flashing it today and it started let me get into the bios setup but when i continued to let it load windows , black screen, i don't think it's the video card or the ram cause it wouldn't start or show video, i know the monitor is fine, maybe the power supply or the cmos battery possibly ??
or is the motherboard or cpu going ??? anyone have any help i would appreciate it !!,
also when i can get it to say press F1 to continue on the initinal sartup screen after flashing,
i try to put in the windows disc, and as soon as the tray closes, the screen goes black
its an
albatron motherboard kx18d pro r1.05
mobile amd alathon 1200mhz
gefroce 6800
2 512mb ddr ram
thanks
or is the motherboard or cpu going ??? anyone have any help i would appreciate it !!,
also when i can get it to say press F1 to continue on the initinal sartup screen after flashing,
i try to put in the windows disc, and as soon as the tray closes, the screen goes black
its an
albatron motherboard kx18d pro r1.05
mobile amd alathon 1200mhz
gefroce 6800
2 512mb ddr ram
thanks
Last edited by Fisti; Nov 25th, 2007 at 6:11 pm.
•
•
Join Date: Nov 2007
Posts: 3
Reputation:
Solved Threads: 0
Hey Fisit,
I too have the problem, I dont have to flash the bios however, just simply press F2 at startup to enter BIOS. If I follow those steps I can leave my Satteliet p35-609 up for hours in bios. But like you anything else and it shuts down shortly after powering up. So if you have any news or ideas I would greatly appreciate it
I too have the problem, I dont have to flash the bios however, just simply press F2 at startup to enter BIOS. If I follow those steps I can leave my Satteliet p35-609 up for hours in bios. But like you anything else and it shuts down shortly after powering up. So if you have any news or ideas I would greatly appreciate it
![]() |
Similar Threads
- Flash Bios Issue (Motherboards, CPUs and RAM)
- How do I flash my BIOS? (Motherboards, CPUs and RAM)
- Asus A7N8X does not store bios settings, no POST (Troubleshooting Dead Machines)
- To flash the bios (Motherboards, CPUs and RAM)
- Flash bios for vid card question. (Monitors, Displays and Video Cards)
- ASUS Flash Bios - Boot Problem (Motherboards, CPUs and RAM)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: How to disassemble/take apart Toshiba laptops
- Next Thread: computer shuts off and just beeps
| Thread Tools | Search this Thread |
6 appliances beep bioslosingharddrived bioslosingsettings black bsod citrix cmosbattery compaq cpu dead delldimension4500 disk failure giving harddrive laptop linux mac mobo neverbuyinspiron1525 nodisplay nopower operatingsystemnotfound osnotfound pc power ram redhat screen supply ubuntu virtualbox virtualization virtualmachines vmware xen





