•
•
•
•
What is DaniWeb IT Discussion Community?
You're currently browsing the Troubleshooting Dead Machines section within the Tech Talk category of DaniWeb, a massive community of 455,982 software developers, web developers, Internet marketers, and tech gurus who are all enthusiastic about making contacts, networking, and learning from each other. In fact, there are 3,776 IT professionals currently interacting right now! Registration is free, only takes a minute and lets you enjoy all of the interactive features of the site.
Please support our Troubleshooting Dead Machines advertiser: Programming Forums
Views: 678 | Replies: 5
![]() |
•
•
Join Date: Nov 2007
Posts: 2
Reputation:
Rep Power: 0
Solved Threads: 0
Recently, my computer has been turning itself off. When I turn it back on, the computer either boots up then turns off after a non-consistent matter of time, or it just turns on and doesn't boot. I've opened the computer and checked all 4 fans that are inside, all of them are put on correctly, and I've read everyone free thread I could find online. If I'm lucky, the computer will stay on long enough for me to log in. When i did, I started up my anti-virus, and as soon as it got halfway, it shut itself off. It all started when my cousin came over and connected her Sidekick phone to my computer to transfer music. Ever since then, it's been acting like this. Is there anything I can do to fix it?
•
•
Join Date: Nov 2007
Posts: 27
Reputation:
Rep Power: 1
Solved Threads: 4
try slaving your hdd to another computer and scan it to see if it really is because of virus.
while you wait for the scan result, try to boot up you pc to see if it can stay up long, better if you use live cd to test the environment...
my guess:
- try to boot up your pc, it is to see if the hardware is the problem. if your pc cannot stay long than the problem is the hardware (probably the psu or the dust, try cleaning/disassemble)...
- av scan the hdd if it is in fact a problem of virus corrupting the system, if so repair it after cleaning the virus.
- try also scanning your hdd for any badsector...
while you wait for the scan result, try to boot up you pc to see if it can stay up long, better if you use live cd to test the environment...
my guess:
- try to boot up your pc, it is to see if the hardware is the problem. if your pc cannot stay long than the problem is the hardware (probably the psu or the dust, try cleaning/disassemble)...
- av scan the hdd if it is in fact a problem of virus corrupting the system, if so repair it after cleaning the virus.
- try also scanning your hdd for any badsector...
Last edited by reedone816 : Nov 27th, 2007 at 12:20 am.
•
•
Join Date: Nov 2007
Location: Birmmingham, UK
Posts: 55
Reputation:
Rep Power: 1
Solved Threads: 0
•
•
Join Date: Nov 2007
Posts: 27
Reputation:
Rep Power: 1
Solved Threads: 4
there could be many thing:
software wise (OS, application, malware, etc)
Hardware wise (heat, cold, dust, electricity, dust, etc)
to see if it is indee hardware:
go to bios, check the temperature s it over heat (usually over 60-70 celcius)
still in bios, see the electricity output, is it not fluctuated much (over 0.25-0.35 volt).
if it is about heat, you must realize that probably some of your components might be burn, check if the tube thing in your mb not "pregnant".
the solution to over heat is just give space for each of your components (hdd, cards, etc) and add some fan with good inflow-outflow management.
if it is about electricity, the best thing is to buy ups, but if you can't afford it try using stabilizer with motor. try also check your psu, whether it is a good brand (like simbadda, enlight, etc). because the cheap psu is not stable on its dc output.
also check out your ram, try to clean its gold bar, if it is dusty.
for the hdd integration try to do scandisk on it in case you'll have new bad sector.
also check out your vga, nowadays vga need more electricity when in full power than the older generation. that can also make your psu unable to support the electricity output. the solution is just to have the higher watt psu.
for the software test.
try to take off your hdd and make it a slave to other hdd in other computer and scan it using the latest updated av database.
software wise (OS, application, malware, etc)
Hardware wise (heat, cold, dust, electricity, dust, etc)
to see if it is indee hardware:
go to bios, check the temperature s it over heat (usually over 60-70 celcius)
still in bios, see the electricity output, is it not fluctuated much (over 0.25-0.35 volt).
if it is about heat, you must realize that probably some of your components might be burn, check if the tube thing in your mb not "pregnant".
the solution to over heat is just give space for each of your components (hdd, cards, etc) and add some fan with good inflow-outflow management.
if it is about electricity, the best thing is to buy ups, but if you can't afford it try using stabilizer with motor. try also check your psu, whether it is a good brand (like simbadda, enlight, etc). because the cheap psu is not stable on its dc output.
also check out your ram, try to clean its gold bar, if it is dusty.
for the hdd integration try to do scandisk on it in case you'll have new bad sector.
also check out your vga, nowadays vga need more electricity when in full power than the older generation. that can also make your psu unable to support the electricity output. the solution is just to have the higher watt psu.
for the software test.
try to take off your hdd and make it a slave to other hdd in other computer and scan it using the latest updated av database.
![]() |
•
•
•
•
•
•
•
•
DaniWeb Troubleshooting Dead Machines Marketplace
•
•
•
•
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
- Computer won't boot (Troubleshooting Dead Machines)
- Computer won't boot up. Possible bios problems. (Troubleshooting Dead Machines)
- my computer will not boot (Windows NT / 2000 / XP / 2003)
- Computer won't boot past Windows XP Logo (Windows NT / 2000 / XP / 2003)
- Computer will not boot with external USB hard drive connected (Peripherals)
- Computer will not boot after power strip overload (Troubleshooting Dead Machines)
- !computer Will Not Boot! Help! (Motherboards, CPUs and RAM)
- Computer will not boot (Troubleshooting Dead Machines)
- Computer will not boot.... (Troubleshooting Dead Machines)
- Tool computer won't boot, does nothing... (Troubleshooting Dead Machines)
Other Threads in the Troubleshooting Dead Machines Forum
- Previous Thread: toshiba laptop won't boot
- Next Thread: gateway laptop wont boot up


Linear Mode