943,703 Members | Top Members by Rank

Ad:
Jul 16th, 2004
0

upgraded to 10.3.4 Scsi not found

Expand Post »
I have just upgraded my G4 dual processor 1.25 to 10.3.4. I am also using Protools 6.4. I have 2 gigs of Ram. Now my second scsi hard drive is not recongized. When I placed back in old machine (G4 400, OS 9) It is still not recongized. Please help. There are very important music files on hard drive.
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
shell408 is offline Offline
2 posts
since Jul 2004
Jul 17th, 2004
0

Re: upgraded to 10.3.4 Scsi not found

Hello,

Does the OS try to format the disk? If so, it is being recognized as a device, but not the internals. What does System Profiler have to say about the device?

OS 9 should recognize it, unless you used something besides HFS or HFS+ to format the device. It is possible that your upgrade caused a problem.

You can also try disk tools in OS X to look at the volume. Is the drive seen in there? DO NOT use NORTON under OS 9 to help with this.

Christian
Team Colleague
Reputation Points: 121
Solved Threads: 57
Posting Virtuoso
kc0arf is offline Offline
1,629 posts
since Mar 2004
Jul 17th, 2004
0

Re: upgraded to 10.3.4 Scsi not found

This is one of two drives on an ATTO dual SCSI card. One of the drives is recognized and the other isn't. The one that is recognized works in both raid bays and the one that isn't recognized works in neither. The OS does try to format the disk when the machine is booted up. The disk is formated HSF+. It is showing up in disk tool utility as a greyed-out, mystery disk. It seems likely that either the OS upgrade or the ATTO driver upgrade scrambled the indexing on the drive.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
shell408 is offline Offline
2 posts
since Jul 2004
Jul 19th, 2004
0

Re: upgraded to 10.3.4 Scsi not found

Is the Atto ExpressPro-Tools program the utility you're using? If not, run that Atto utility and see what it reports about the drive.

In terms of the driver update, which exact driver did you use, and what is the model of Atto card?
DMR
Team Colleague
Reputation Points: 221
Solved Threads: 369
Wombat At Large
DMR is offline Offline
6,439 posts
since Dec 2003

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Apple Hardware and Devices Forum Timeline: help with installing a new hard drive
Next Thread in Apple Hardware and Devices Forum Timeline: Imac won't see Liteon LSC-24081mx





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC