944,126 Members | Top Members by Rank

Ad:
Nov 8th, 2006
-1

Powerbook with OS 8.1 Lockup

Expand Post »
Hi everyone,

I have a Powerbook 5300CS with OS 8.1. I haven't used it in a couple of years but today I decided to work with it. I booted it up and everything looked good except the date and time was wrong. I corrected them and shut it down and hooked up my external CD ROM and external touch pad. When I turned it back on it only got as far as the boot screen and the boot indicator didn't even get a quarter of the way before it froze. I removed the CD ROM and touch pad and tried it again but it still locks up at the boot screen at the same time. Any ideas?
TIA!

-HJR
Similar Threads
HJR
Reputation Points: 10
Solved Threads: 0
Newbie Poster
HJR is offline Offline
1 posts
since Nov 2006
Aug 7th, 2010
0
Re: Powerbook with OS 8.1 Lockup
It could be an extension. Try booting with extensions disabled.
Reputation Points: 21
Solved Threads: 8
Junior Poster
W1ND0W5 is offline Offline
119 posts
since May 2010
Aug 13th, 2010
0
Re: Powerbook with OS 8.1 Lockup
It could be an extension. Try booting with extensions disabled.
Reputation Points: 4
Solved Threads: 0
Newbie Poster
zzj0770 is offline Offline
6 posts
since Aug 2010
Sep 18th, 2010
0
Re: Powerbook with OS 8.1 Lockup
Hold down the shift key while booting to disable extensions. If that doesn't work, reset the pram and try again (cmd alt p r). Your pram battery will definately be dead so you'll loose the date and time.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
richardtj is offline Offline
12 posts
since Sep 2010

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Mac OS 7 / 8 / 9 Forum Timeline: Mac G5 power problem
Next Thread in Mac OS 7 / 8 / 9 Forum Timeline: Problems with upgraded G3





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC