I am new to using linux on my own machines, but i have seen it in use before and i know a small bit as ive been reading up on it quite a lot. I downloaded mandrake linux 10.1 community to put on my computer and i previously made two extra partitions at the end of my drive for linux. A 2 gig swap and a 12 gig ext3. After downloading the iso's i used nero 6 to make bootable cd's with them and it starts loading off the screen with a bunch of dos prompts saying usb loaded cdrom loaded sound card loaded etc, but then it stops with a floppy disk prompt [A:/] i tried burnig it so many ways and no avail. I also tried using SuSE and i had the exact same problem! Am i burning the iso's wrong or is there something else i need to configure or do? Im really anxious to get a chance to play on my computer because i dont have to work this week :lol: Thanks in advance, nizzy
the screens go fast but ill try and post everything i can see here i stick the boot cd in and it goes to load it up....
it says dc rom ok usb stuff ok
(the Drive lables are wrong and my 2 linux partitions are not showing up...)
usb support successfully initialized
NWCDEX.EXE Version 2.81 CD-ROM file handler.
Copyright(c) 1992, 1997 Caldera Inc. All rights reserved
Drive G: Driver 'MSCD001' unit 0
Drive H: Driver 'MSCD001' unit 1
completed codepage prepare funcion
completed codepage select function
NLSFUNC R4.00 National Language Support
Copyright(c) 1988,1998 Caldera, Inc
Caldera DR-DOS 7.03
Copyright(c) 1976, 1998 Caldera, Inc. All rights reserved
[DR-DOS] A:\>
This is what is see except there was more initializing and sucess of cd roms and stuff in the beginning
Might not be a bad idea. What disc were you booting from? You might need to make a boot floppy to get up and running.
yeah im downloading it right now along with the mini disk. is the mini disk just the basic os files for mandrake without anything else? Ill let you guys know if this works in a couple hours once the downloads finish. thanks for helping me so far :lol:
ok so heres the deal...ive downloaded disk one and mini disk again and i get the same thing...this leads me to think that its not the files but something im doing. Right now i have duel boot windoes xp home and pro...dont ask...those are on my C and D drives...drive M is for music only and V is for videos only. I then made 2 drives for linux: swap and ext3...however i think im having the problem when i am burning the disks here is what i have done:
the file is origionally an iso
-i tried burning it straight over as a disk image project in nero and it just puts one file on the disk and does nothing at boot.
-i tried extracting the files with winrar and burning all the files over to a bootable data disk with nero
what should i do to make linux load at boot?
my computer supports cd boot its a sony viao pvc-rz32g with more memory hard drive and better cooling...its set to boot off the cd then floppy then hard drive in bios...help?
I want to start a new thread ( I think ) , but see no button or way to do so.
The title would be the same, as my install of Mandrake 10.2 hangs on "sr_mod failed".
I appologize for using this method to post, but the FAQ, etc don't tell me how to start a thread.
John Roberts
Frisco, CO
No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Previous Thread in Linux Applications and Software Forum Timeline:Mandrake 10.0 Boot CD
Next Thread in Linux Applications and Software Forum Timeline:recall
Unsolved 
Offline 
