944,196 Members | Top Members by Rank

Ad:
Aug 6th, 2006
0

I have a HP Netserver 2000 running SCO UNIX 5.0.6. I get the message: istat=0a

Expand Post »
I have a HP Netserver 2000 running SCO UNIX 5.0.6. I get the message: istat=0a: LSS_PAR on ha=1 sist0=41 sist1=00 !!!! dstat =81 on ha=1 has DS_OPC while WAIT DISCONNECT, rp=c014f8co dsp=FD on path=1, newdsp=FD064600 WARNING: Parity Error MSG OUT=00000006 Failed, 1code=80000002 on ha=1 id warning:”RESERVE” command timed out 1201 seconds after start on ha aborting command on ha=1 id=2 lun=0 tag=00 cpu2:istat=0a: LSSn ha=1 sist0=41 sist1=00!!!! cpu2:dstat=81 on ha=1 has DS_OPC while at WAIT DISCONNECT, rp=c014f8co cpu2:on path=1, new dsp=fd064600 I have changed motherboard, tape drive, (2) processors, SCSI controller for tape drive, tape drive software, and memory. The only thing I have not changed is the hard drives. The system freezes up and does not back up. System runs fine during the day. The log time is around 7PM when this error occurs. Does this every 2-3 days. A reboot takes care of the lockup. The above message is on the console. I have Googled parts of the error message and seems to be pointing to a system BIOS and SCSI Symbios problem. Does anyone have any suggestions?
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
dmksh is offline Offline
2 posts
since Aug 2006
Aug 13th, 2006
0

Re: I have a HP Netserver 2000 running SCO UNIX 5.0.6. I get the message: istat=0a

When did this first start happening? Did you change anything around that point?

I don't deal with SCSI and OpenServer directly, but it might even be a termination issue, or something. Have you considered swapping cables, or checking the termination on your drives?

Just a thought.
Last edited by alc6379; Aug 13th, 2006 at 6:21 am.
Team Colleague
Reputation Points: 186
Solved Threads: 147
Cookie... That's it
alc6379 is offline Offline
2,519 posts
since Dec 2003

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Linux Kernel and Hardware Setup Forum Timeline: Tripple Server IPTABLING
Next Thread in Linux Kernel and Hardware Setup Forum Timeline: usbvideo: Unknown symbol





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC