943,518 Members | Top Members by Rank

Hardware and Software > Microsoft Windows > Windows 95 / 98 / Me > Windows 98 won't load
Ad:
You are currently viewing page 1 of this multi-page discussion thread
Permalink
May 3rd, 2004
0

Windows 98 won't load

Expand Post »
Have a HP pavilion comp., Windows 98, 466 mhz processor, 319 Ram, and the CD-rom stopped working. Got an external CD-rewritter backpack. Downloaded the driver from their site. Hooked up the cd-rewriter. It assigned the D letter to it. Restarted. Everything looked great, worked fine. Then installed my son's CD. It installed it, then required direct x and media player to be installed as well (wasn't sure if we had those on there already) so clicked okay. It then said to restart, I did. And now, Windows will not load. I get the logon box, hear the happy little music, see the background image and even a quick flash of the task bar, then nothing. Have tried to start in safe mode, still nothing. Have tried to use the restore points in DOS mode (scanreg/restore), still nothing. Have tried to use the HP recovery CD, won't work. I did notice when I do the ctrl alt delete, the task manager does not show explorer running, only some of the utilities of the antivirus program and something called hidserv. I hope someone can please help me...? So frustrating!

Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 3rd, 2004
0

Re: Windows 98 won't load

Can you do Safe Mode?

When the system starts, try tapping either F8 or the Ctrl key, then you should be able to select Safe mode. Let us know if you can get there okay, and your desktop loads.
Team Colleague
Reputation Points: 186
Solved Threads: 147
Cookie... That's it
alc6379 is offline Offline
2,519 posts
since Dec 2003
Permalink
May 4th, 2004
0

Re: Windows 98 won't load

Nope, does the same thing in safe mode. Also does the same thing when I go back to a restore point 'before' this happened as well (by using scanreg).
Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 4th, 2004
0

Re: Windows 98 won't load

Hidserve is Win98's Human Interface Device Service, not something that should be causing you problems.

What was your son's CD? A CD drive, a program? If it was a program what was it?
Reputation Points: 89
Solved Threads: 5
Junior Poster in Training
TheComputerGeek is offline Offline
53 posts
since Mar 2004
Permalink
May 4th, 2004
0

Re: Windows 98 won't load

"What was your son's CD? A CD drive, a program?"
-It was just a kids CD (Bob the builder).
Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 4th, 2004
0

Re: Windows 98 won't load

Here is another thing (don’t know if it will make a difference or not) but I do have the screwed up comp. networked to the computer I am currently using. I didn’t think it would work, but I am able to access the files of the screwed up comp. Is there any way that this can be helpful?
Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 6th, 2004
0

Re: Windows 98 won't load

Well, I got my hands on a start-up disk and have run the scan disk. Had no errors, ran a full scan. Weird thing is, it then asked next driver? So, I said yes, and it then scanned drive D (which is the drive is applied to the new external CDRW, I believe). But, it didn't ask to check the original cd-rom drive (m) or the floppy (a). Weird. Wondering if maybe it has assigned the drive D to as another hard drive or something?? Or it is trying to start Windows with it? Anyhow, currently I am trying to get into BIOS to choose setup defaults and then maybe boot from the hard drive (someone gave me this advice). BUT, I cannot locate which darned key I need to type when booting to get into the BIOS! Have tried del, f1, f2, f9, page up, page down, and more. Bios is not the same thing as the place one gets to when pushing the ctrl or f8 key, correct?

Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 6th, 2004
0

Re: Windows 98 won't load

Okay, figured out how to get into bios (was f1 key, was just pushing it at wrong time ). Anyhow, set the default, saved and exited. Still didn't work.

Looked around a little and jotted down some notes. This is what it said on main screen:

Primary master [8447mb]

primary slave [none]

secondary master [CD-ROM]

secondary slave [none]

installed memory 320 mb

memory bank 0 256 mb

memory bank 1 64 mb

And here is what it said on the Boot screen:

boottime diagnostic screen: disabled

floppy check disabled

1 removable devices

2 ATAPI CD-ROM drive

3 hard drive

4 network boot

There was actually a long empty (blank) area between the numbers and the names (above).

When I went to hard drive it said:

1. ST38421A-(PM)

2. Bootable add in cards

Anyhow, hope this makes sense to someone, 'cause it makes no sense to me! ???

Is there anything else I can do in the bios area that may help?

Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004
Permalink
May 6th, 2004
0

Re: Windows 98 won't load

You should start by changing the setting for "Boottime diagnostic screen" to Enabled. That will allow the BIOS POST meassages to display during startup and hopefully give some further clue to what's happening.

I'm also curious about precisely how you tried to use that Recovery CD. The procedure is generally to pop the CD in the drive and reboot. That launches you into a fresh install of everything, but will lose all your data and programs. It's designed to restore your system to its original Factory state.

The fact that you're getting to the logon and then no further suggests that your Windows installation is screwed, more than anything else, and perhaps a fresh install would be your best option. (I've had similar happen on a Compaq of similar vintage, and the procedures are quite similar)

I'm not too sure about those BIOS settings. Perhaps if you could provide the exact model number of your HP Pavilion it might help track down the information you need.
Team Colleague
Reputation Points: 229
Solved Threads: 149
Grandad
Catweazle is offline Offline
3,826 posts
since Mar 2004
Permalink
May 6th, 2004
0

Re: Windows 98 won't load

Well, I can't use the recovery CD, since my internal cd-rom does not work, and the external cd-rom won't work without Windows running. My Comp. is an HP Pavilion 6535. Will enable the boot time diagnostic screen and see what I see.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
MYSTery is offline Offline
7 posts
since May 2004

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Windows 95 / 98 / Me Forum Timeline: Erroe messgae when starting windows ME
Next Thread in Windows 95 / 98 / Me Forum Timeline: Customizing Folders





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC