set you bios to boot from the CD first. and put a bootable cd in
bobbyraw
Nearly a Posting Virtuoso
1,324 posts since Oct 2006
Reputation Points: 34
Solved Threads: 103
Why did you replace the drive?
If it's still working, you can copy or clone it.
If not, you need a copy of your OS on a bootable CD.
It appears that you have a SATA drive, so don't forget to load the drivers for it.
As I recall, the setup screen is F2, and you should see this option when you first boot the PC.
hughv
Veteran Poster
1,142 posts since Oct 2007
Reputation Points: 116
Solved Threads: 93
remove the hard drive, restart the PC, did you get the bios screen?
bobbyraw
Nearly a Posting Virtuoso
1,324 posts since Oct 2006
Reputation Points: 34
Solved Threads: 103
No boot CD is going to help until you can get a BIOS screen.
Bobbyraw's suggestion is a good one. In addition, check carefully inside the PC for loose connections, re-seat the memory and any cards.
You should be able to get to the Setup screen even without a hard drive, so something else is wrong, and it's likely to be related to the installation of the new drive.
Basically, check everything, even if you think you didn't touch it during the HD swap.
Dell is offering PCs with Ubuntu now, and you could download and burn an Ubuntu CD and install it in just a few hours.
hughv
Veteran Poster
1,142 posts since Oct 2007
Reputation Points: 116
Solved Threads: 93
Make sure the video card is properly seated. Remove it and replace it, if necessary. This card may have a tab you have to push aside to remove it, so look at it carefully.
It could be that the card is bad, but that's quite a coincidence. Make sure the fan on this card is turning.
hughv
Veteran Poster
1,142 posts since Oct 2007
Reputation Points: 116
Solved Threads: 93