Hi I am trying to install xp pro on a preasrio 700 (724EA). However, when it gets to installing devices it gets to a certain point and stops with the message: stop:0x0000007e: sysaudio.sys. Never gets past this point. I figured that the audio hardware is causing this but cannot disable in the shit compaq bios. A friend of mine, as an exercise, loaned me a copy of XP Pro corp, and this installed ok although i couldn't use becasue of the licence. It was just meant to see if it did the same error. One thing i noticed about corp, was that it gave you the option to not install unsigned hardware, which i beleive is causing my problem. Does anyone know if XP Pro has this facility at setup stage? Any help would be appreciated. TIA
well i have installed both Windows XP Home and Windows XP Pro (non corp) and i have never seen an option to not install unassigned hardware. though i have run into errors similar to yours (ie stop error during the installation) that were due to a bad disk.
See if you can obtain another copy of windows (the one that didnt work) borrow it from a friend or somthing of the sort, so that you can try with a working copy. I know that the copy i have is very picky about the computer its on, and the cd drive its in. ive tried installing it before on my old computer and it gave me errors with the drivers, so i swapped in a new cd drive and it installed perfectly. Ive also tried installing it on my current comp, and again i had to swap in a cd drive and it worked perfectly, but its not that the current drives were bad, they were running perfectly fine so i dont know what caused it...
try another CD...seems like your best bet here....