Welcome to Daniweb pinkshadow !
Well auto shutdown issues have no any actual solutions because there are many reasons that causes this error. Check the battery located in the motherboard if it down replace it.
Or can you please put the error code here so i can know better about your problem
thunderstorm98
Veteran Poster
1,117 posts since Nov 2006
Reputation Points: 97
Solved Threads: 20
Both of those things sound like something that could be wrong. I guess the best way to know for sure would be to bring it to a computer repair place, then.
If it helps last time my computer shut down I copied the error code it is as follows:
Stop: 0x0000007E (0xC0000005, 0x805C607B, 0xF9FC91E8, 0xF9FC8EE4)
And thank you so much to both of you already for trying to help! :) <3
did you get anything else with the numbers like ,this maybe
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED.if so post it ,and i certainly would not buy a new computer because of a bad cpu fan ,and i don't think that is your problem,more likely a device/driver conflict ,
I suggest you boot to the winxp cd and run R ,for repair .and do the following .
To run chkdsk...
1) Insert WinXP CD
2) Click "R" when prompted to (so you can go into recovery console)
3) Type in Chkdsk c: /f /r
4) Once completed, type in exit and remove Windows CD.
caperjack
I hate 20 Questions
13,069 posts since Aug 2003
Reputation Points: 1,064
Solved Threads: 812
It may be caused due to corrupted sensors in motherboard who sends wrong temprature details to BIOS.
Another question: its a direct shutdown or proper shutdown like windows default shutdown screen ? Or your system stop responding before it happens ?
thunderstorm98
Veteran Poster
1,117 posts since Nov 2006
Reputation Points: 97
Solved Threads: 20
I got a similar problem 3 days ago.Win Xp shut down & I got a blue screen with an error message "An attempt was made to write to read-only memory".The error code at the end was: 0X000000BE (0X805037C8,0X00503123,0XFB01146C,0X0000000B)
Windows c'd not start normally.I had to boot in Safe Mode.I tried System Restore to various earlier days but did not work.I uninstalled a few software(licensed) that I had installed on the I first encountered the problem.But that hasn't solved the problem either.
Now, I reduced the no. of start-up programs ,disabled a few processes, etc. to reduce the load on the CPU and RAM.
I was able to start normally a few times but got the shutdown message once again.
Like with Pink Shadow, it happens sometimes after 1 hour or so,sometimes just after starting.But the difference has been that the error message has changed and now it is saying "IRQL_NOT LESS_OR_EQUAL" and the error code at the end is: 0X0000000A (0XE13A3180,0X000000FF,0X00000001,0X805459FC)
This problem affects all user accounts in my computer,Virus Scans have found no Virus/Trojan/Spyware/Adware/Malware.
Disk checks have shown no problems(my Harddisk is only about 10 months old),Hard Drive Inspector shows good HD condition.My hardware are all new( about 8 months-1 year old).The software I am using now are ones i have been using for the past few months.
I have no idea about what is causing this problem.Is this a serious fault?
Welcome to Daniweb SArunSR!
This is hardware fault replace the RAM memory and then try, or check proper jumper settings of both IDE.
thunderstorm98
Veteran Poster
1,117 posts since Nov 2006
Reputation Points: 97
Solved Threads: 20
caperjack
I hate 20 Questions
13,069 posts since Aug 2003
Reputation Points: 1,064
Solved Threads: 812
caperjack
I hate 20 Questions
13,069 posts since Aug 2003
Reputation Points: 1,064
Solved Threads: 812