954,315 Members — Technology Publication meets Social Media
Username:
Password:
Lost login information?
Have something to say? Contribute New Article Reply to this Article

Hard Drive not recognised in vista

Hi ! I hav two HD 1 Ide & other sata both 80 GB. I installed a third sata 250 gb segate HD but it dosent show in vist . I hav XP on drv 0 and Vista on the other. I tried many times changing the cables etc but no use. first it showed in XP but after several restarts even that was gone. Any help will be apreciated.

svjzoo
Newbie Poster
1 post since Apr 2009
Reputation Points: 10
Solved Threads: 0
 

It sounds like Vista does not have a driver for your drive controller. This would be provided by whoever made the motherboard in the PC.

A lot of drive controller drivers are integrated into the Vista install disk, but not every one of them. Vista needs this driver to detect the hard drive during install.

gavin.williams
Newbie Poster
11 posts since May 2009
Reputation Points: 10
Solved Threads: 2
 

Ther is also a chance that the BIOS is not automatically set to detect drives. changing positions can throw the bios if it is set for a manual detect. Just see in the bios if ALL the drives are detectedIf not theyn you may have some tweaking to do with either cables or master slaves eetc
M

mjdodd
Posting Pro
591 posts since Sep 2007
Reputation Points: 36
Solved Threads: 53
 

you may have to have it recognized in the managed computer section in disk managment

m23perrault
Newbie Poster
7 posts since May 2009
Reputation Points: 8
Solved Threads: 1
 

Go into your control panel, click classic view on the left side, click administrative tools, click computer managment, then click disk management. Is the drive there? If you see the drive in disk management but can not see it under "my computer" , within disk managment you can right click on the drive and hit format. This should enable the drive to be recognized. Otherwise if the drive is not showing anywhere in disk management, I would restart the computer and go into the bios to see if the drive is showing up there. If not you will have your going to have to tweak the jumper settings on the IDE drive. Check your motherboard's manufacture website for updated bios flash?

good luck

drewid68
Newbie Poster
8 posts since Mar 2008
Reputation Points: 10
Solved Threads: 1
 

Vista and xp have some major compatibilty issue's over ownership, I'm not to sure if you would want to even contemplate trying to share the storage between the two. It has cost me so much hair I'm actually thinking of sueing Billy Boy for a new rug!.

Choose which os you want to use it with. I'm assuming it's xp being on drv 0. Pull out the vista hdd. configure your raid in the bios then rock on!

Have a crack at sticking the vista drive back in and see what happens, but for Pete's sake if the drive shows on vista don't let it go near it!!!!!!!!!!!!!!!!!


Vista and xp might look like friends, but they're a couple of two faced mortal enemies!

A1 data nz
Junior Poster in Training
68 posts since May 2009
Reputation Points: 70
Solved Threads: 1
 

Oh and buy the way, If vista has already turned to twister.

Rip the thing out and format it externally through xp!


Hope it helps :-)

A1 data nz
Junior Poster in Training
68 posts since May 2009
Reputation Points: 70
Solved Threads: 1
 

If it's a drivers problem: go to bios and are a setting AHCI Mode and put on disable or ATA mode. It should work now. If not find a windows with Sata drivers incorporated .

reganstar
Junior Poster in Training
69 posts since Apr 2009
Reputation Points: 10
Solved Threads: 10
 

Open the Start Menu, right-click on Computer
and select Manage. Click on Disk Management.
From the Toolbar select Action > Rescan Disks.

francisabey
Junior Poster in Training
85 posts since Aug 2008
Reputation Points: 18
Solved Threads: 6
 

heya jigs!
thanks for answering i had same problem with ma system and wanted to know the same thing but unluckily the answer is still pending am still not able to figure problem...please tag me back.

Cards & Games Shopping Directory | Body Arts Trade Suppliers Directory | Visual Arts Business Directory | Holidays Business Directory

Aadil_rules
Newbie Poster
2 posts since May 2009
Reputation Points: 10
Solved Threads: 0
 

This article has been dead for over three months

Post: Markdown Syntax: Formatting Help
You