943,740 Members | Top Members by Rank

  • Networking Discussion Thread
  • Unsolved
  • Views: 10672
  • Networking RSS
Jun 28th, 2009
0

Help setting up my d-link dir-615 router

Expand Post »
Initially I was using a switch to connect all my 5 desktop systems using one of them as my internet server/gateway. On that particular internet server-desktop pc, I use the Sierra wireless Aircard 580 modem which I adapted with a pcmcia-pci card. I used the ICS to share out internet to the other systems using dhcp configuration. Each desktop carries the (192.168.0.last dhcp assigned digit) while the internet server desktop carries 192.168.0.1 as the gateway. Everything was working perfectly until I introduced the D-link router into the LAN.
Initially I connected the Ethernet cable of the internet server desktop to the INTERNET port of the router but the indicator remained a solid red color. Also, I couldn’t get the 192.168.0.1 on my browser. So I connected the internet server desktop directly to one of the LAN ports of the router (using one of the 4 LAN ports) and then connected my switch to another LAN port of the same router. Then I was able to get the http://192.168.0.1 ip to enable me configure the router through the browser.
At this stage, the router still could not get internet connection from the desktop internet server. (Please note that all this while, I was reading up everything the manual says as well as visited many forums for a way out).
I finally thought the router’s internet connection port was faulty so I returned it in exchange for another one. Alas! The issue remains the same.
I decided to try out another method which I picked up from one of the forums I visited, by changing the ip of the router to 192.168.0.2 while my internet server desktop retails the 192.168.0.1 for sharing internet. I then reconfigured the router accordingly to use the 192.168.0.2 ip address.
The situation now is that all the other 4 desktops upon reconfiguring them for dhcp internet access keep using the router’s ip (192.168.0.2) as gateway instead of 192.168.0.1 but without internet connection while all the systems can ‘see’ one another and share resources (including the internet server desktop) without problem.
Kindly inform me what I have done wrong or yet to do right.
Thank you.
Similar Threads
Reputation Points: 10
Solved Threads: 1
Light Poster
emiola is offline Offline
49 posts
since Jul 2008
Jun 29th, 2009
0

Re: Help setting up my d-link dir-615 router

Why not use the router as the gateway instead of the pc unplug the modem from the pc and plug it into the wan or internet port of the router power cycle the modem and router and all machines should be on the internet.
Reputation Points: 12
Solved Threads: 36
Posting Pro in Training
freshfitz is offline Offline
436 posts
since Sep 2008

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Networking Forum Timeline: One Computer Router Problem
Next Thread in Networking Forum Timeline: Connect Home PC to Office LAN





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC