Hi
I am also getting this problem on my Dell 8250 system, using a Dell UltraSharp LCD display. Anyone got any ideas on how to fix?

angus71,

We ask that members not tag their questions on to a thread previously started by another member (regardless of how similar your problem might seem). Not only does it divert the focus of the thread away from the original poster's problem, but it also makes it less likely that you yourself will get the individual attention that you need.

Please start your own thread and post your question there. When you do, please try to give us as much specific info as possible regarding the problem (exact error messages, system specs, etc.).

For a full description of our posting guidelines and general rules of conduct, please see this page:

http://www.daniweb.com/techtalkforu...b_faq#faq_rules


Thanks for understanding.

ykahn,

If the monitor isn't the cause, the video card would be the next thing to look at, especially since you said that the problem either goes away or changes when you run in safe mode. In safe mode, Windows uses its standard VGA driver instead of the video card's own driver, so what you described would make sense. You might want to try another video card if you can to rule out a hardware fault in that area.

Well there could be 2 answers to this that i can see (in my experience) either:
1. Your video memory is broke, this causes verticle lines and artifacts on screen (have you tried anothe rmonitor, perhaps normal CRT monitor?)
2. The onterface between the LCD itself and the control board is miss-aligned or even damaged in some way.
If 1, get new graphics card, easy.
If 2, send the screen back to be repaired/replaced, its far too fiddly to do yourself, infact u may well just break it totally trying.
Lets hope its 1, cos thats simple and easy to do yourself, becaues 2 just takes ages and will probably cost delivery/warranty charges or something irritating like that.
Hope this helps.

Hi
Having had a similar problem myself recently, I found that increasing the airflow to my case helped. I basically just put a standard desk fan pointing in the direction of my PC to test this theory before I went out and bought a new case/fans etc.
This might work for you, too, if your PC is in an air-restricted spot.
Hopefully of some help...

Vertical red dots, and random red dots during video playback.

I was having this problem with the driver 71.84.

I found posts on the web saying to fall back to 66.93.

I did so and the problem stopped.

There must be some kind of problem with the 71.84 drivers. I did not experience problems in games- just every where else.

Stupid thing but have you tried changing refresh rate?

Clear Type Fonts?

Adjust DPI Settings?