Monitor comes on but has only colors flashing and checker board disign
Expand Post »
This computer is an E Machine 600. Cant get the monitor to work right.It turns on but is full of colors and flashes. I tried another monitor with the same results.Any help would be appreciated.
Re: Monitor comes on but has only colors flashing and checker board disign
Pop your case open and reseat your video card. If that has no good results then go for a new video card. If you have another PC than you might switch video cards to confirm that it is bad.
Re: Monitor comes on but has only colors flashing and checker board disign
There is three steps:
Check cable going to monitor, move it from one side to another, check it for connection.
Check cable going to computer (same procedure)
Try to remove video card and place one more time in the same slot (if you understand this)
If nothing happens, try to connect other monitor.
If situation never changes, take all computer and go to place where you bought it.
Either the thread starter or a moderator has marked this thread as solved. You can most likely trust the responses and answers given. There is most likely no reason for any further responses to be posted here. If you have a related question, please start a new thread in this forum instead.
This thread is more than three months old
No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Previous Thread in Monitors, Displays and Video Cards Forum Timeline:ATI VPU recover
Next Thread in Monitors, Displays and Video Cards Forum Timeline:Solve My Problem
Marked Solved 
