I have a machin, its mother board's LED is on but do not work any thing. I have replaced Processor, RAM,Hard even battery but not working. Please tell me about this problem.
shorts can be fixed most problems are is people put the mb in the wrong type case or touch it with hands with out touching the case at the same time take the mb out and look and see the case is touching the mb some whare also make sure you have the right power supply wats like 180 to 300 are common for newer mb and if you have volt meter test the power supply to make sure it working and make shore the mb caps on the mb is not blown ty paul post back if you need more info
I have a machin, its mother board's LED is on but do not work any thing. I have replaced Processor, RAM,Hard even battery but not working. Please tell me about this problem.
I have a machin, its mother board's LED is on but do not work any thing. I have replaced Processor, RAM,Hard even battery but not working. Please tell me about this problem.
Your motherboard controller chip is not working,so replace your motherboard instead of CPU,RAM and Hard.
shorts can be fixed most problems are is people put the mb in the wrong type case or touch it with hands with out touching the case at the same time take the mb out and look and see the case is touching the mb some whare also make sure you have the right power supply wats like 180 to 300 are common for newer mb and if you have volt meter test the power supply to make sure it working and make shore the mb caps on the mb is not blown ty paul post back if you need more info
You may want to try a little punctuation as your post makes no sense at all.
Also, use complete English words as per the site rules.
No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Unsolved 
Offline 
