how do you have bios look for a driver

[clasher097]

how do you have bios look for a driver because i just reformatted my computer and i cant get my cd/dvd rom drive to work

[i686-linux]

I'm assuming that your cd/dvd rom drive worked before you reformatted your computer. Did you use this same drive that is installed right now to load an operating system cd to format the hard drive? Does the bios recognize the drive, but your operating system does not? Are you able to boot off of a cd? Does If the bios doesn't recognize the cd/dvd rom drive then you would you need to check cable/power/jumper settings, not driver issues. If the cd/dvd drive worked fine with the bios before, and no hardware changes were made, then there should be no reason why it wouldn't work now.

[Catweazle]

Your Operating System please? If it's windows, which version are you using?

Is your computer a recent one or a quite old one?

[clasher097]

i will be running windows xp
i think i got it around 97 98

[clasher097]

i also lost my drivers and did not make any back ups before i reformated

[clasher097]

im not able to boot from a cdrom drive yet. when i go to cdsetup.exe it says it cant locate mscdex.exe
do you know were i can get this

[Catweazle]

What makes you believe that it doesn't work? Have you tried to Boot from the CD and had no success?

Was the system a new one in 97/98, or a secondhand unit? Is the BIOS configured to use CD-ROM as '1st boot device'? Does the BIOS POST information indicate that the drive is detected?

[clasher097]

yes it was new custom i reformatted with the a: drive i
sorry for asking what does a bios do ?is it like a translater

[clasher097]

what is mscdex.exe i have a hitachi gd-2500 cd/dvd drive
and it says its not ready reading drive d

[Catweazle]

clasher, for starters could you please click on the 'Edit' button at bottom of your post to add further comments, instead of making multiple posts one after another. Or better still, wait until you've typed out your entire comment before clicking on 'Submit'. This is a forum, not irc, mate.


Next, which version of Windows are you trying to install at the moment? If it's Windows 98, what are you trying to install it from. You should be trying to boot the system from a Windows 98 Startup diskette, which would have mscdex.exe included on it.

If you are trying to install Windows XP from a Windows CD, then you should be making changes in BIOS to allow the system to boot directly from the CD.

BIOS is the 'Setup' routine of the machine itself. You usually access it by pressing when the machine is powering up.

[clasher097]

sorry, im going to install win xp but im using a win ME boot disk is that what im doing wrong and can i make a boot dist from another computer that is running xp and use it on mine?

when i bought my computer it came with windows 98 than i upgraded to windows xp before i reformated the computer

when your in bios what do you changeto have the cd om drive work?

[Catweazle]

If you have Windows XP on CD, you don't need a boot disk.

Enter BIOS setup when you start the machine. Find the enties for Boot sequence and set 1st Boot device to CD-ROM, and all other boot devices to 'Disabled'. Pop your Windows CD in the drive, Save and exit from bios setup, and watch for the 'Press any key to boot from CD' message that will be briefly shown.

Then follow this guide: http://gtadatabase.web1000.com/windows/windows.html

You will be asked at some point to insert your Windows Me CD if the version you have is an upgrade disk for Windows XP. You only need the Windows Me disk for verification.

You will also get the opportunity to remove the existing partition on the hard drive. At this point, it is a goood idea to do so, create a new partition in its place, and then continue with the installation electing to use the NTFS file system for the installation.

Formatting will be done for you.

Good luck

[clasher097]

thanks for your time i hope this works!!!

i already reformated the computer already with the win me disk should i do it over

whan in bios do u change the boot sequence under bios fetured setup
are all bios's the same?
do u chandge it to this? cdrom c,a

what r the other boot devices that u disable?

[Catweazle]

No.

If the hard drive is empty you won't have a problem. When you get to the screen where you are asked if you wish to install Windows XP to the partition, follow instructions to remove the partition, and then follow the instructions to create a new partition in the unpartitioned space, using the NTFS file system.

(NTFS is much more efficient than the FAT32 file system used by Windows Me)

[clasher097]

its saying it needs atapi cd-rom

[Catweazle]

CD-ROM, C, A should be fine.

Are you getting the 'Press a key to boot from CD' message? If you don't press a key when the message shows, the routine is interrupted.

[i686-linux]

What is saying it needs atapi cd-rom?

[Catweazle]

heh heh.... I'm curious about that too. You ready to take over on this mate. It's way past bed-time where I am!

[clasher097]

i also have 2 files in the c drive from wheni was figuring out how to get my drive to work what should i do

[clasher097]

its saying boot from atapi cd rom

im also not getting that message:cry:

im just about ready to throw my computer out the window!!!:evil::mad: