943,589 Members | Top Members by Rank

Ad:
  • Storage Discussion Thread
  • Unsolved
  • Views: 2056
  • Storage RSS
Feb 9th, 2009
0

Samsung sata hdd detection problem

Expand Post »
I have a pc with two hdds:
1. maxtor - diamondmax 10, 160gb pata133 hdd, n256, 3.5 series ,d33019
2. samsung sata sp2504c

When turning on my pc, sometimes i would get the error that there are bad sectors and the hdd (maxtor had the os - xp - installed and the pc would boot on that) had to be replaced; and sometimes there wouldnt be a problem and i could see both hdds detected in my computer.

I installed xp (on the maxtor hdd) without formatting the maxtor hdd, and didn't get the bad sector msg anymore. But samsung sata hdd wasn't detected in the bios nor windows.

When checking the bios (Phoenix - Award Bios v6 00PG), only the maxtor hdd and the cd/dvd rom were detected.

I tried changing the cables, but still had the same problem. I also tried formatting the maxtor hdd and installing xp on it again..but still the same.

Now for the bios options, the Onboard SATA-1 Adapter is enabled. Is there anything else that should be changed?

Here's how my bios looks like: http://h10025.www1.hp.com/ewfrf/wc/d...h07110_chandev

In the bios's main menu, this is what it says:

>First Channel Device 0 {TSSTcodpCD/DVD]
>First Channel Device 1 [Maxtor 6B160P0]
>Second Channel Device 0 [None]
>Second Channel Device 1 [None]
>Third Channel Device 0 [None]
>Fourth Channel Device 0 [None]


Here's what I have in the bios's advanced area:

Plug & Play OS [Yes]
Reset Configuration Data [No]
Primary Video Adapter [PCI]
PS/2 Mouse [Auto Detect]
Local Bus IDE Adapter [Both]
Onboard SATA-1 Adapter [Enabled]
USB Legacy Mode Support [Auto]
Onboard LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Onboard 1394 [Enabled]
Set Supervisor Password [Disabled]
Set User Pasword Disabled
>I/O Device Configuration
>Onboard Audio
>Hardware Monitor

When I click on the Local Bus IDE Adapter, I get the options below:
Disabled...........[]
Primary............[]
Secondary........[]
Both................[x]
And when I cick on Onboard SATA-1 Adapter get the following options:
Disabled...........[]
Enbled.............[x]


any idea how i can get the samsung sata hdd detected???

Thnks
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
sonya2525 is offline Offline
19 posts
since Jul 2006
Feb 11th, 2009
0

Re: Samsung sata hdd detection problem

Why hasn't anybody posted any replies yet?! is it coz I put to much info in my first post?! plz help me out
Reputation Points: 10
Solved Threads: 0
Newbie Poster
sonya2525 is offline Offline
19 posts
since Jul 2006
Feb 16th, 2009
0

Re: Samsung sata hdd detection problem

have you tried to load default bios settings? try it out...
the samsung sata hdd have you used it before or not?
if it's a new one then you better return it..as far as i know samsung hdd is 3 years warranty...(but you better double check) lol....
Last edited by cguan_77; Feb 16th, 2009 at 10:52 pm.
Reputation Points: 19
Solved Threads: 115
Nearly a Posting Virtuoso
cguan_77 is offline Offline
1,317 posts
since Apr 2007

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Storage Forum Timeline: Recommendation for a MyBook replacement
Next Thread in Storage Forum Timeline: Lost NTFS file system on external harddisk.





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC