Did you set the jumper on the old hard drive to Master instead of stand alone or single drive? What is the drive type..?

You will need to pick up a Y adapter to add a power connection for the second drive

Quote:
Originally Posted by Thong_Ispector
Did you set the jumper on the old hard drive to Master instead of stand alone or single drive? What is the drive type..?

You will need to pick up a Y adapter to add a power connection for the second drive


sorry I'm new, but jumper is that small thing that you put in two of the 10 pins???
as I said I didn't see any of those things on my original HDD, & it works fine right now without the new HDD added
& what is a Y adapter???
does the 2nd drive NEED a power connection even if the original HDD has one?

the new HDD is a Western Digital HDD & the original is from HP Pavilion a510n factory built

I'll try to make myself more clear..

Even though your existing drive works as a stand alone unit it often needs a jumper in order to add a second drive to the same cable.

Telling me the name of your computer does not tell me the name of your original hard drive.

Physically pull out the old hard drive and look for jumper settings on the case...

You should see settings for stand alone (No jumpers)

Master and a picture and slave with a picture (or diagram)

One way or another you must have power to both drives in order for them to work.

If you read my comments in your other thread, you'll find that there actually IS a mounting point for another hard drive in that case!

The first thing you did wrong is not read those comments! Do NOT have a hard drive sliding around loose in your PC!

yeah I checked & saw no jumper on my original HDD!!!

also when I opened it up my PC I found out it was different from the picture I posted, there was absolutely NO place for another HDD

I DID buy today a USB 2.0 HDD Enclousre Kit, IT IS what I need for an external HDD since there is no space inside my PC????
I JUST sepnt an extra $70 for this so I REALLY hope I need it

with the new HDD I THINK there might be another jumper, I didn't see it before
it's this right:

http://www.infohq.com/Computer/CompG...perCloseup.jpg

there was a white jumper already in the new HDD & that black one in a packet inside the box
are all jumpers black like in that pic, because having a white one that looked a little different that was already on the pins & one different black one in a packet seems strange

I could also not find another Power supply to connect to the new HDD in my PC

a power Supply Y Splitter is this right:
http://www.usb-ware.com/images/pyo2sl-250.gif


so I need a extra jumper for my Original HDD & a power supply splitter for my NEW HDD????

P.S. SHOULD I OPEN THE BOX for the USB HDD Enclosure or return it?
will I have to do something different now with that??

You need to determine the exact make and model number of the original hard drive, and determine what the various jumper configurations for it are. Not all drives use the same pins in the same places for the same configurations.

The jumper can be any colour whatsoever. It's simply a push on thingy which connects two pins.

You do need to add a jumper to your original hard drive in order to add a second drive on the same cable.

If you are having trouble figuring that out you can add your second drive to the cable that goes to your cd rom or dvd...

You will again see jumpers on the back but you should simply be able to add the hard drive as slave.

Feel free to try that without looking at the jumpers as most cd's are already jumpered as master (or can be checked in the bios...)

I have never seen a case that I could not get a second hard drive to fit...
I have had to use one of the 5.25 drive bays and only attach one side or get a $5 kit that takes up the entire 5.25 bay.

That Y is wrong...
You dont need to add a small floppy type power connector you need two of the larger connectors . The one you want has 3 large connectors one male and two female (depending on how you look at it) It can have an additional small connector like the one in your picture but iyou do not need it.

Post a pic of the inside of your case so we can get an idea where to put the new drive. Post a pic of the face (writing or logo) of your old hard drive.

Do you have an unused bay for a second cd or dvd that is not being used?
That would be fine if there is no hard drive specific place...

The external usb will work but iI dont think that is what you were trying to do...

If you do go the external case then you do not need to get the new Y or use the Y you just bought.

I got those pics from websites, I sadly can't take pics & load them up to my my PC

[QUOTE=Thong_Ispector]Do you have an unused bay for a second cd or dvd that is not being used?
That would be fine if there is no hard drive specific place...[/QOUTE]

nope, that's why I bought the UBS enclosure

yeah it seems the USB Enclosure has all that, just that IT WON'T WORK
when I connected everything & turned on my PC it just stays on the start screen & doesn't go to the loading Windows XP screen
ONLY when I turn off the USB Enclosure kit does it work normally!

-should I take off the jumper in the extra HDD when I put it in the Enclosure kit OR add a jumper in my original HDD inside my PC

-How does the Enclosure kit determine which drive will be used as the main drive & which one for back ups only? as there is only one IDE cable with two pin connector slots inside it?

I would suggest you check the manual that came with your enclosure.
It will tell you how to set your second hard drive...
My guess would be with no jumper.. ie master/stand alone..

You should not need to add a jumper to your primary hard drive