My other PC always show an irritating Floppy disk ERROR at start up and after completing Booting and everything running the floppy wont read, it always say drive not ready, have tried several methods, changing the connections, changing the bios settings and the like to fix it but to no avail what should I do?
hi and welcome to the forum
floppy disk error eh... ok this could be any of these things.
1. faulty floppy drive itself.
2. faulty wiring (ie flat ribon type cable with a twist in it)
3. the cable is the wrong way round (note if the drive light is on all the time when it shouldn't be)
4. faulty connection/controller on the motherboard.
sometimes a visual inspection of the machine and its setup can give a lot away and you might have to pay out a small amount for new parts for the machine. try these afore mentioned things though by either testing in another machine or by changing cables.:)
JANINE
Practically a Posting Shark
869 posts since Mar 2005
Reputation Points: 51
Solved Threads: 21