i've gotta a boot up problem...i scraped my PC down to it bare bones with only the mother board powered yesterday but the machine refuses to boot..i've replaced the RAM, reset the CMOS....still no result...
though it did boot for in my first attempt after connecting all the components starting with the HDD and then the Combo drive....it also detected the drives in the Bios setup...but after completely being connected it hasn't booted since then....
At this point you should probably check the settings on the drives. Occasionally if the Master / Slave settings are off or set to cable select it can have an impact on things. You may also want to make certain your major components are seated fully ie Memory, Video Card, Data and power cables.
If these sets don't work try taking it down to nothing and listening for POST tones again.
thanx...first for addressing my problem....
now i did take my PC down to nothing...i have replaced the CMOS battery....
tried to boot it only on the motherboard( Intel 845 series)...
but the problem is dat the SMPS just shuts off after about 5sec automatically...
NO POST messages...no display...the power on LED goes off after dis happens...
Well, assuming that the Power supply is still good then this is going to be a failed motherboard then. Intel has a 3 year warranty on US sales of motherboards so you may, depending on when you purchased it, be able to get a replacement from them.
No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Unsolved 
