943,789 Members | Top Members by Rank

Ad:
Jun 12th, 2009
0

Sony VGN 260

Expand Post »
I have a VGN 260.The laptop does not start when i press the power on switch.If i keep doing it repeatedly it comes on after number of attempts which is frustrating.
i have replaced the RAM with a new one as suggested by local Sony Service.Still the problem is not solved.
I attepmted keeping the laptop in Standby mode.Again the unit does not go on after some time.
Similar is the case when i tried Hibernate.
Can any one suggest a solution please?
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
vssound is offline Offline
1 posts
since Jun 2009
Jul 5th, 2009
0

Re: Sony VGN 260

Sounds like a power button issue. There may be some dirt, or crumbs under the button. Remove the button panel, and test it. then, blow out any debris, and then retest.
Reputation Points: 10
Solved Threads: 7
Junior Poster in Training
dogbreath077 is offline Offline
87 posts
since Nov 2007
Jul 5th, 2009
0

Re: Sony VGN 260

That most likely is the issue. Do what dogbreath077 said, and if that is not the problem, you may discover what is wrong when you take the panel off.
Reputation Points: 10
Solved Threads: 5
Junior Poster in Training
thepastimer is offline Offline
82 posts
since Feb 2009

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Troubleshooting Dead Machines Forum Timeline: Still won't light up
Next Thread in Troubleshooting Dead Machines Forum Timeline: CD/DVD drive I/O error.





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC