944,014 Members | Top Members by Rank

Ad:
May 23rd, 2005
0

PC Rebuild won't boot

Expand Post »
I just decided to rebuild my PC but I'm having some issues. I tried 2 different motherboards and have the same problem.

Mobos - PC Chips M848ALU and ABit AN7
Memory - DDR 400MHz PC3200
Processor - XP3200
Graphics Card - Radeon 9800 AGP
400W PSU

When I boot the computer, it starts up fine to start with. I can access the bios as normal and all seems well. After the bios screen advances to where it should say LOADING WINDOWS XP, it freezes and never gets to the screen. Then if I restart, I get the WINDOWS NOT SHUT DOWN PROPERLY message and if I pick start normally or safe mode, both lock up right there. I also can't boot from CD. If I try to reinstall winXP I get an error at the blue setup screen saying it couldn't load a file. I also tried booting from PHLAK, my bootable linux disc, which also freezes and won't boot. Any suggestions?
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
mookie92484 is offline Offline
3 posts
since May 2005
May 23rd, 2005
0

Re: PC Rebuild won't boot

OK, so I found some extra memory and swapped it. I think that might have been part of the problem. Now my computer won't freeze when I pick start normal or in safe mode. Instead, now it just reboots after it loads for 3 seconds. Any Suggestions?
Reputation Points: 10
Solved Threads: 0
Newbie Poster
mookie92484 is offline Offline
3 posts
since May 2005
May 23rd, 2005
0

Re: PC Rebuild won't boot

If you change a motherboard you MUST reinstall XP
Reputation Points: 16
Solved Threads: 19
Practically a Master Poster
Thong_Ispector is offline Offline
638 posts
since Nov 2004
May 30th, 2005
0

Re: PC Rebuild won't boot

Ok. So I switched out the motherboard and still had a few issues. Then I switched the memory with some other memory and that fixed my issue. Now I put that board in a different computer with known working parts and the computer won't even post now. Well, it worked for 2 days. Then today starded randomly rebooting and locking up on startup. So I reset the CMOS and now it won't even POST. If I hit the power button the monitor stays black but everything inside, fans, drives, etc..., turn on. I think it's the motherboard. I'm going to test the PSU with a multimeter, but I don't think that's the problem. That machine worked fine with the old mobo. I'd love to try that one back in it but don't have it anymore. I think the moral is don't buy a cheap motherboard even if it has some good reviews. Spend the extra money on and ABit. lol. Let me know if you have any suggestions.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
mookie92484 is offline Offline
3 posts
since May 2005

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Troubleshooting Dead Machines Forum Timeline: Computer will not boot
Next Thread in Troubleshooting Dead Machines Forum Timeline: Blank screen when booting from rescue floppies or XP C.D





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC