944,052 Members | Top Members by Rank

Hardware and Software > PC Hardware > Troubleshooting Dead Machines > stuck on "detecting hdd primary master"
Ad:
Permalink
Sep 23rd, 2005
-1

stuck on "detecting hdd primary master"

Expand Post »
I have an older computer that won't boot up. It gets as far as 'Detecting HDD Primary Master' [Press F4 to Skip]. There is no response from the F4 Key. I've checked the CMOS and BIOS and they look fine. I haven't installed any new devices except to swap out the Hard Drive to see if that made a difference, it didn't. From what I've read I have come to the conclusion that the BIOS chip is corrupted. I've tried several different Boot Disks to no avail. The MB is a Freetech, I tried contacting them for support but my email was 'undeliverable'. Is there any way to determine whether or not the BIOS is working and if not how to repair it. The chip set is an Intel Triton TX. And the Bios is an Award No. 2A591F29C-00. If you have any guesses as to what might be the problem I would like to hear from you.
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
craiger is offline Offline
2 posts
since Sep 2005
Permalink
Sep 24th, 2005
0

Re: stuck on "detecting hdd primary master"

Did you try going through the My PC won't start - Read this first! stickied thread?
Reputation Points: 38
Solved Threads: 25
Posting Shark
chrisbliss18 is offline Offline
902 posts
since Aug 2005
Permalink
Sep 24th, 2005
0

Re: stuck on "detecting hdd primary master"

Quote originally posted by chrisbliss18 ...
Did you try going through the My PC won't start - Read this first! stickied thread?
Yes, I tried that. I found an old Western Digital that is the same size as the Maxtor, 40 Gig. I followed the Protocol from the WD install page and now time it hangs up at "copying files need for set up". Based on this can I now rule out the BIOS as being the problem.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
craiger is offline Offline
2 posts
since Sep 2005
Permalink
Sep 25th, 2005
0

Re: stuck on "detecting hdd primary master"

craiger,

Original Problem: Original configuration startup halts at HDD detection. You cannot boot with a startup disk.

New Problem: New configuration (new HDD) Windows install halts during "coying system files". You can boot with a startup disk.

Please confirm, deny, and/or add to the above information.

J_
Reputation Points: 27
Solved Threads: 6
Posting Whiz in Training
J_Search is offline Offline
284 posts
since Aug 2005

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Troubleshooting Dead Machines Forum Timeline: Comp randomly shuts down
Next Thread in Troubleshooting Dead Machines Forum Timeline: New Build Won't Post





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC