944,054 Members | Top Members by Rank

Hardware and Software > PC Hardware > Troubleshooting Dead Machines > Compaq presario 2100
Ad:
Permalink
May 6th, 2006
0

Compaq presario 2100

Expand Post »
Hello all,

Now i have seen a couple of posts regarding this issue but i was hoping somone would be able to help me on this ... what seems to be the problem on my case is that i have replaced the power plug on the motherboard. i removed the power module on the mother board and replaced it with another wire essentially moving the power module externally ... the problem now is that the laptop doesnt seem to power up at all, neither does it charge the battery, i think there's nothing wrong with the mother board, as the laptop did power up through the battery.

Can someone please help me zero down on this issue?:rolleyes:
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
sharjil is offline Offline
1 posts
since May 2006
Permalink
May 15th, 2006
0

Re: Compaq presario 2100

Why, oh why would you go doing something like that?

It is obvious that you did somethin wrong with psu. Your laptop isn't getting the power at all from it. Either you didn't connect it properly or you just plain tosted the psu.

Are you sure you connected ALL wires? (you stated "a wire" as a singular(!?))
Reputation Points: 230
Solved Threads: 45
Posting Virtuoso
Chaky is offline Offline
1,985 posts
since May 2006
Permalink
May 24th, 2006
0

Re: Compaq presario 2100

yeah look for shorts from solder or metal dust...
Reputation Points: 10
Solved Threads: 0
Newbie Poster
daphaze is offline Offline
5 posts
since Jul 2005

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Troubleshooting Dead Machines Forum Timeline: Windows XP won't startup- black screen
Next Thread in Troubleshooting Dead Machines Forum Timeline: presirao 722us





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC