943,733 Members | Top Members by Rank

Hardware and Software > PC Hardware > Troubleshooting Dead Machines > HP NC6000 hard to start then locks up
Ad:
You are currently viewing page 1 of this multi-page discussion thread
Permalink
Oct 25th, 2007
0

HP NC6000 hard to start then locks up

Expand Post »
I have an HP NC6000 from my work. I use it everyday, and usually have it plugged into an adapter in my truck. Today, I came home and tried to go online with my laptop. When it was loading firefox the computer froze and nothing I could do would unfreeze it. Finally I pushed the power button to turn it off. This did so. When I tried to turn it back on again the computer would not start up. I had the ac cord plugged in and the battery in. I tried about a dozen times to restart the machine. The charge light would come on, the fan would spin and 5-10 seconds later the machine would turn off. After a dozen times or so I pushed the sleep button while I pushed to power button for kicks and it started up. After booting up the computer froze and I was back to my original problem. This time I pushed the cd button after my sleep button did not work and again it stated up. I let it boot then before it could freeze I turned it off thru the windows menu. I called HP support and that guy had me pull the battery and unplug the ac cord then hold the power button down for one minute. After this it seemed to work but five minutes after I hung up, the computer froze again. I called back, and no surprise, this guy did not want to help me because the warranty expired back in April he told me to reinstall the os.

I am running windows XP with Service Pack 2.

Any ideas as to why the computer is now freezing up? It was working fine all day. And how am I to reinstall the os if the computer keeps freezing?

The computer is currently off and I believe will be difficult to start or will freeze upon restart. I have a HDD from my toshiba laptop that lost it's motherboard. The HDD still works. I could, maybe, use that?
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
bclacquer is offline Offline
2 posts
since Oct 2007
Permalink
Nov 17th, 2007
0

Re: HP NC6000 hard to start then locks up

Hello,
I have the same problem. Reloading the OS and/or changing the memory chips did not help. Sometimes it doed start and run fine.
Where you able to resolve your problem?
Thanks
Reputation Points: 10
Solved Threads: 0
Newbie Poster
dean1962 is offline Offline
1 posts
since Nov 2007
Permalink
Nov 19th, 2007
0

Re: HP NC6000 hard to start then locks up

Hate to be the bearer of bad news but if you check the hp forums you will find that this has become quite an issue with the nc6000. Motherboard has gone bad. Problem is that all this version of board seem to develop this problem over time. I have been working on this problem for a couple of weeks. Have tried another board bought through ebay but of course with my luck this one also has the same problem. If you are having boot issues try pressing on the top right hand side of the computer just above the keyboard and almost guaranteed it will boot up. Problem is that it is very unstable, any wiggleing of the display will cut it out again. Seems to be a problem around the cpu socket area of the board.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
E blackadder is offline Offline
2 posts
since Nov 2007
Permalink
Nov 19th, 2007
0

Re: HP NC6000 hard to start then locks up

I know. I found that forum the same time I posted on this one. I have a new motherboard on order, I am hoping it lasts a year or two. My referb laptop (original) only lasted about 6 months. I just will not be able to use it every day.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
bclacquer is offline Offline
2 posts
since Oct 2007
Permalink
Nov 19th, 2007
0

Re: HP NC6000 hard to start then locks up

I am going to try a board from ebay from this member ltmcomptec They have a bunch of them guaranteed for 30 days. They also have a newer version of this board than mine. Mine is version 1.2 they have version 1.2 and 2.0. Hopefully the 2.0 is not as prone to failure. I am sure if we wait long enough someone will come up with a way to repair these boards. I think it all has to do with the flex in the boards when the lid is opened and closed. If you have the unit open you can see a considerable flex when the unit is opened. If you can run your unit for now, try taking the screw out of the right hand side hinge. Seems to help with the stress on the board. Makes the system a little less unstable.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
E blackadder is offline Offline
2 posts
since Nov 2007
Permalink
Nov 20th, 2007
0

Re: HP NC6000 hard to start then locks up

Foergive me if this is a red herring - I can't be arsed to do a full search of the forum; but wasn't there a thread here where a so called "magnet piece" was becoming detached from its solder point on the motherboard and basically falling off onto the casing?

If it wasn't the same laptop - I'm sorry. But it's wotrth a look around the forum or a look inside the laptop for something loose. It's this pressing in the corner that's the clue - it appears to help make a circuit so something could have come adrift.

Me - I'm a Dell man/family for laptops! Ne'er a problem in 8 years and about 6 laptops passed through the family.
Sponsor
Reputation Points: 47
Solved Threads: 144
Posting Virtuoso
Suspishio is offline Offline
1,729 posts
since Aug 2007
Permalink
Nov 23rd, 2007
0

Re: HP NC6000 hard to start then locks up

No advice for your lockup But I have had this piece of crap for 3 years, The mother been replaced at least 4 times.

Went into repair every 4 months

Last time as AFTER my warranty b/c I bitched what a piece of crap it was, where they completely gave notebook a once over.

This "repair" lasted 3 months.

The notebook is sluggish again, and the fan WHIRLS, one IE 6 window eats up resources.

It is a piece of junk. I wonder who was the morons that rated this a great notebook?

On a side note-- I wonder if those new motherboards will help?

Otherwise its Apple for me baby!!!
Last edited by dkaleky; Nov 23rd, 2007 at 1:34 pm.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
dkaleky is offline Offline
2 posts
since Nov 2007
Permalink
Dec 23rd, 2007
0

Re: HP NC6000 hard to start then locks up

Does any one have a resolution for this problem ?

I faced the same issue last sunday and I am frustrated as my laptop is out of warranty and I had spent about 2,000 dollars 3.5 years back.

I can afford to spend another 200 on this computer before I leave this crap as dead.

Please let me know if changing the motherboard has solved this issue. Also, buying a motherboard from a site like ebay will be trustworthy ?

Thanks for reading this post and I will appreciate a prompt reply.

jaxraj2007
Reputation Points: 10
Solved Threads: 0
Newbie Poster
jaxraj2007 is offline Offline
1 posts
since Dec 2007
Permalink
Dec 23rd, 2007
0

Re: HP NC6000 hard to start then locks up

If you paid for the laptop on VISA they will give you extra year!

Or most any other credit card- I am in process of shipping the piece of crap back to HP to get fixed.


Courtesy of visa.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
dkaleky is offline Offline
2 posts
since Nov 2007
Permalink
Feb 2nd, 2008
0

Re: HP NC6000 hard to start then locks up

For what it is worth, I have managed to repair two of these so far, both the with the problem of only booting while pushing on or around the processor socket. I found that when not pushed on, the board lost the core voltage (1.4 V to the processor). This is controlled by a Maxim chip on the bottom of the board by the power input jack. Looking at the leads of this chip under a binocular scope, I could see several connections with hairline fractures at the chip. The Maxim chip is a core voltage control chip, and is unusually high off the boardwith very soft solder connections. The repair consisted of very carefully (under the scope with a very sharp tip iron) reflowing the solder connections that looked cracked. Both boards have been working perfectly since.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
shadowsack is offline Offline
2 posts
since Feb 2008

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in Troubleshooting Dead Machines Forum Timeline: Dropped Laptop
Next Thread in Troubleshooting Dead Machines Forum Timeline: Computer keeps restarting/shutting down randomly





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC