Have a LaserJet P3005 printer. When switched on the indicator lights come on and stay on as if it's ready to print, but the LCD remains blank and no longer displays anything (normally displays READY) either during POST or when it is Ready. Printing fails.
Tried a cold reset holding the Check button during POST. Indicator lights blinked and then went solid. Nothing on screen.
I've walked through the HP troubleshooting online and in the manual. But it basically stops at turn the machine off and then back on.
Last edited by Kurtismonger; Aug 25th, 2009 at 8:18 pm.
Either the thread starter or a moderator has marked this thread as solved. You can most likely trust the responses and answers given. There is most likely no reason for any further responses to be posted here. If you have a related question, please start a new thread in this forum instead.
This thread is more than three months old
No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Marked Solved 
