943,946 Members | Top Members by Rank

Ad:
May 8th, 2007
0

Cant use headset microphone Labtec C-316

Expand Post »
I'm having problems getting my microphone to detect in the gigabyte auto-sense. For some reason it is seeing it as a power speaker.
I have a regular boom mic and it works fine(it is detected properly and works in every way i have tried) but when i try to hook up the Labtec C-316 Headset with mic it just wont see it. There is nothing particularly special about it...no volume control or built in push to talk buttons...the speaker portion works fine. I have tried using the microphone with and without the headset speaker and neither works.
I have updated both my chipset drivers for MB and the realtek audio drivers and i see no difference.

My MB is a Gigabyte GA-K8U

My biggest belief is that this is software related not hardware..i do have another headset with microphone and it is detected the same way(powerspeaker) im thinking of putting another machine together just to test headset microphones but i believe they work(at least they did about 6months ago when i stopped using them but that was on another system)

Thanks in advance for any advice.

Fatefinder
Similar Threads
Reputation Points: 10
Solved Threads: 0
Newbie Poster
Fatefinder is offline Offline
3 posts
since May 2007
May 9th, 2007
0

Re: Cant use headset microphone Labtec C-316

I would double check your property settings in Volume controll and make sure that the Headset is set correctly under recording options.
Reputation Points: 10
Solved Threads: 6
Junior Poster
RueB2sDe is offline Offline
110 posts
since May 2007
May 9th, 2007
0

Re: Cant use headset microphone Labtec C-316

As stated above i can switch the microphones back and forth repeatedly and the boom mic always works without fail. The two different headsets get nothing from the mic. Unless there is something im missing it wont be in basic recording volume controls as they dont change when i switch out microphones.

If there is something im missing please let me know and thanks for the effort.

Fatefinder
Reputation Points: 10
Solved Threads: 0
Newbie Poster
Fatefinder is offline Offline
3 posts
since May 2007
May 10th, 2007
0

Re: Cant use headset microphone Labtec C-316

I found a good thread that might answer some of your questions. Check out: http://h10025.www1.hp.com/ewfrf/wc/f...cname=bph07158

Hope that helps.
Reputation Points: 10
Solved Threads: 6
Junior Poster
RueB2sDe is offline Offline
110 posts
since May 2007
May 16th, 2007
0

Re: Cant use headset microphone Labtec C-316

Does the mic require phantom power?
Reputation Points: 730
Solved Threads: 181
Nearly a Senior Poster
MidiMagic is offline Offline
3,314 posts
since Jan 2007
May 19th, 2007
0

Re: Cant use headset microphone Labtec C-316

-This may be the problem.
Click audio controls on the taskbar, go to advanced under Master Volume. Make sure that center speaker and subwoofer isn't connected to microphone. Just uncheck both, unless that option is required.. worked for me.
Reputation Points: 10
Solved Threads: 0
Newbie Poster
adammj is offline Offline
8 posts
since May 2007

This thread is more than three months old

No one has posted to this discussion for at least three months. Please let old threads die and do not reply to them unless you feel you have something new and valuable to contribute that absolutely must be added to make the discussion complete. Otherwise, please start a new thread in this forum instead.
Message:
Previous Thread in USB Devices and other Peripherals Forum Timeline: dlink driver needed
Next Thread in USB Devices and other Peripherals Forum Timeline: Microphone Issue





About Us | Contact Us | Advertise | Acceptable Use Policy
Forum Index | Build Custom RSS Feed


Follow us on Twitter


© 2011 DaniWeb® LLC