Posts by blahmeow

I tried installing the first driver but the page doesn't load.
I figured you might need to be registered with prolific so I tried but they're not accepting new members.

I have a few hits for the tty. but let's move one thing at a time

- the mouse works (tested on a pc)
- i did not install a driver since I could not find a reference, manufacturer or anything that could tell me which driver to install. It's a mouse we've had for a while and I don't have any box or info on it. The only thing written on the mouse is "ADJ".
When I plug it with USB Overdrive I get a vendor id 5593, product id 2636 and bunch of other numbers. When I connect it to a PC I see which driver is running it but it's of course a windows one

I don't have an external port.
I've tried it on the 2 USB port I have on the side of my MBP and still the same results.
I can't figure it out. Thanks for the help

Not sure. Below is the full log

Hub (EHCI Root Hub Simulation) @ 0xfa000000 with 6 ports
Port 1: Status: 0x0503 Change: 0x0000 HubDevice
STATUS(change): CONNECT ENABLE POWER HighSpeed
Port 2: Status: 0x0507 Change: 0x0000 FaceTime HD Camera (Built-in)
STATUS(change): CONNECT ENABLE SUSPEND POWER HighSpeed
Port 3: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 4: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 5: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 6: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Hub (HubDevice) @ 0xfa100000 with 3 ports
Port 1: Status: 0x0107 Change: 0x0000 BRCM2070 Hub
STATUS(change): CONNECT ENABLE SUSPEND POWER FullSpeed
Port 2: Status: 0x0103 Change: 0x0000 Apple Internal Keyboard / Trackpad
STATUS(change): CONNECT ENABLE POWER FullSpeed
Port 3: Status: 0x0503 Change: 0x0000 iPhone
STATUS(change): CONNECT ENABLE POWER HighSpeed
Hub (BRCM2070 Hub) @ 0xfa110000 with 3 ports
Port 1: Not Responding
Port 2: (*dev)->DeviceRequest err: 0xe000404f
Port 3: Not Responding
Hub (EHCI Root Hub Simulation) @ 0xfd000000 with 8 ports
Port 1: Status: 0x0503 Change: 0x0000 HubDevice
STATUS(change): CONNECT ENABLE POWER HighSpeed
Port 2: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 3: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 4: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 5: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 6: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 7: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Port 8: Status: 0x0500 Change: 0x0000
STATUS(change): POWER HighSpeed
Hub (HubDevice) @ 0xfd100000 with 2 ports
Port 1: Status: 0x0307 Change: 0x0000 IR Receiver
STATUS(change): CONNECT ENABLE SUSPEND POWER LowSpeed
Port 2: Status: 0x0303 Change: 0x0000 USB OPTICAL MOUSE
STATUS(change): CONNECT ENABLE POWER LowSpeed

I have one, still somehow it didnt appear.
I downloaded the one for os x 10.7.2 and ran it. below are the last lines of the log - below. The mouse is detected (confirmed by the infrared light and the fact that when I plug it and go System Preferences/Mouse I see the Settings) but the pointer still does not move and the mouse cannot click

Hub (HubDevice) @ 0xfd100000 with 2 ports
Port 1: Status: 0x0307 Change: 0x0000 IR Receiver
STATUS(change): CONNECT ENABLE SUSPEND POWER LowSpeed
Port 2: Status: 0x0303 Change: 0x0000 USB OPTICAL MOUSE
STATUS(change): CONNECT ENABLE POWER LowSpeed

Hi dioioib,

I'm having the same problem on my macbook pro os x 10.7.3 with a ADJ optical mouse.

The mouse lights red when I plug it in so it has power.

I checked out your site to download the USB Debug dev tool but when I click on the version of the tool that fits my os i get a blank page
https://developer.apple.com/downloads/index.action?name=IOUSBFamily%20Log%20Release%20for%20Mac%20OS%20X%2010.7.3

SHould I try the one for os x 10.7.2?

thanks