•
•
•
•
What is DaniWeb IT Discussion Community?
You're currently browsing the Windows NT / 2000 / XP / 2003 section within the Tech Talk category of DaniWeb, a massive community of 391,568 software developers, web developers, Internet marketers, and tech gurus who are all enthusiastic about making contacts, networking, and learning from each other. In fact, there are 2,650 IT professionals currently interacting right now! Registration is free, only takes a minute and lets you enjoy all of the interactive features of the site.
Please support our Windows NT / 2000 / XP / 2003 advertiser:
Views: 3070 | Replies: 9
 |
•
•
Join Date: Jul 2006
Posts: 1
Reputation: 
Rep Power: 0
Solved Threads: 0
Newbie Poster
I recently purchased a new hard drive after mine crashed. (I have a Dell from a few years back; got a "Missing or Corrupt System 32" message).
I have confirmed the hard drive was installed correctly (shows model number as master in bios). I was running windows 2000. Made the six boot disks, but receive "Disk I/O" error message after running first disk. I have an Dell XP operating disk from my wife's newer computer. I tried using this as well, but get a "no bootable devices found" message.
Do I have to go out and buy and new OS CD to get my computer running. It just seems like there has to be an easier way. Maybe I created XP boot disk instead of 2000. Does it matter? Shouldn't I just be able to install XP from my wife's disk?
Any thoughts greatly appreciated!!!
I have confirmed the hard drive was installed correctly (shows model number as master in bios). I was running windows 2000. Made the six boot disks, but receive "Disk I/O" error message after running first disk. I have an Dell XP operating disk from my wife's newer computer. I tried using this as well, but get a "no bootable devices found" message.
Do I have to go out and buy and new OS CD to get my computer running. It just seems like there has to be an easier way. Maybe I created XP boot disk instead of 2000. Does it matter? Shouldn't I just be able to install XP from my wife's disk?
Any thoughts greatly appreciated!!!
•
•
Join Date: Jul 2006
Location: UK
Posts: 167
Reputation:
Rep Power: 3
Solved Threads: 6
Junior Poster
•
•
•
•
Originally Posted by wjrinck
I recently purchased a new hard drive after mine crashed. (I have a Dell from a few years back; got a "Missing or Corrupt System 32" message).
I have confirmed the hard drive was installed correctly (shows model number as master in bios). I was running windows 2000. Made the six boot disks, but receive "Disk I/O" error message after running first disk. I have an Dell XP operating disk from my wife's newer computer. I tried using this as well, but get a "no bootable devices found" message.
Do I have to go out and buy and new OS CD to get my computer running. It just seems like there has to be an easier way. Maybe I created XP boot disk instead of 2000. Does it matter? Shouldn't I just be able to install XP from my wife's disk?
Any thoughts greatly appreciated!!!
I think your a bit of a lost cause! If you don't know what your doing don't do it.:mad: Look at your manual it will tell your how to restore your dell. You must use only the disks that came with your machine. no others:mad:
•
•
Join Date: Dec 2003
Location: Marin County, CA
Posts: 6,439
Reputation:
Rep Power: 18
Solved Threads: 339
•
•
•
•
Originally Posted by knsljo
IYou must use only the disks that came with your machine. no others:mad:
wjrinck,
I'm surprised that your wife's install disk didn't even find a drive to install on; that isn't the problem one usually encounters when using an OEM disk on another machine. Given that you've received two different disk-related errors when trying two different installation methods, I would:
* Double/triple check the physical installaiton of the drive; just because the BIOS can read the disk info from the drive's firmware does not mean that the drive is functioning (or installed) entirely correctly.
* Borrow a retail version of a Windows XP or 2000 install disk from someone, try it, and see if you encounter errors with that. If so, something isn't right hardware-wise.
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
•
•
Join Date: Jul 2006
Posts: 12
Reputation:
Rep Power: 3
Solved Threads: 1
Newbie Poster
If your floppy drive is having problems I would think that could cause it. I had a floppy drive go out once, in fact it would go in and out. Turned out it was my power supply. You would think if a power supply goes out that nothing would work but that is not the case. In fact the bad power supply affected my cdrom drive and my floppy but the rest of my pc was fine until the day my pc wouldn't come on. I new then my power supply was bad so replaced it.
WALLA ! cdrom and floppy working fine again.
WALLA ! cdrom and floppy working fine again.
•
•
Join Date: Jun 2005
Location: India
Posts: 1,307
Reputation:
Rep Power: 6
Solved Threads: 35
One more suggestion. I noticed recently that Windows was not detecting my CD drive, despite it being detected perfectly in the BIOS. I was stumped here. I then tried to boot off of a CD using this drive, but failed. I then again checked the BIOS, it was being detected. On an impulse, I switched data cables and voila! Everything was back to normal. I suggest you also try swapping your data cable with a new one.
Touch eyeballs to screen for cheap laser surgery
•
•
Join Date: Dec 2007
Posts: 1
Reputation:
Rep Power: 0
Solved Threads: 0
Newbie Poster
I picked up an IBM Thinkpad I Series at an auction sale, I installed a new hd since it didn't have one and am trying to install 2000 professional but all I get when I install the disk and restart is "install diskette and press enter key to reboot". What am I doing wrong??
•
•
Join Date: Dec 2003
Location: Marin County, CA
Posts: 6,439
Reputation:
Rep Power: 18
Solved Threads: 339
The order in which your computer looks for bootable media (Floppy disk, CD-ROM, Hard Drive) might need to be adjusted so that the machine boots from the CD drive first.
Here are the instructions for that procedure from IBM/Lenovo's support site; the steps might be slightly different for your particular model of Thinkpad, but they should be at least close enough that you'll b able to figure it out:
1. Power off the ThinkPad, if it is turned on.
2. Power on the ThinkPad.
3. Press the F1 key to enter the BIOS Setup Utility when the ThinkPad logo is seen on the
screen.
4. Choose Startup from the menu
5. Choose Boot from the menu (*).
6. In Boot Priority Order, set ATAPI CD0 to the top of the list, 1.
7. Press F10 to save the new setup.
(Insert the Win 2000 install CD at this point)
9. Restart the system; it should now detect the CD and attempt to boot from it
Here are the instructions for that procedure from IBM/Lenovo's support site; the steps might be slightly different for your particular model of Thinkpad, but they should be at least close enough that you'll b able to figure it out:
1. Power off the ThinkPad, if it is turned on.
2. Power on the ThinkPad.
3. Press the F1 key to enter the BIOS Setup Utility when the ThinkPad logo is seen on the
screen.
4. Choose Startup from the menu
5. Choose Boot from the menu (*).
6. In Boot Priority Order, set ATAPI CD0 to the top of the list, 1.
7. Press F10 to save the new setup.
(Insert the Win 2000 install CD at this point)
9. Restart the system; it should now detect the CD and attempt to boot from it
Last edited by DMR : Dec 17th, 2007 at 9:04 pm.
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
•
•
Join Date: Oct 2006
Posts: 1,278
Reputation:
Rep Power: 4
Solved Threads: 92
•
•
•
•
Originally Posted by wjrinck 
I recently purchased a new hard drive after mine crashed. (I have a Dell from a few years back; got a "Missing or Corrupt System 32" message).
I have confirmed the hard drive was installed correctly (shows model number as master in bios). I was running windows 2000. Made the six boot disks, but receive "Disk I/O" error message after running first disk. I have an Dell XP operating disk from my wife's newer computer. I tried using this as well, but get a "no bootable devices found" message.
Do I have to go out and buy and new OS CD to get my computer running. It just seems like there has to be an easier way. Maybe I created XP boot disk instead of 2000. Does it matter? Shouldn't I just be able to install XP from my wife's disk?
Any thoughts greatly appreciated!!!
>>>>Made the six boot disks
what operating system were the boot disk made for?
windows 2000 with only boot a windows 2000 instalation.
>>>>Disk I/O" error message after running first disk.
this mean the floppy is damage, you woild have to make that one over.
>>>>no bootable devices found" message.
you have to set the bios to first boot from the cd drive.
However, if this disk is not bootable, you would ahve to get a bootable cd to run the installation, in the same breath, you can make the bootable floppy and use a non bootable xp cd.
>>>>>>Shouldn't I just be able to install XP from my wife's disk?
if the disk is a restore cd the disk may be made specific to your wife pc, However, if this cd is a full version of XP it should work
•
•
Join Date: Dec 2003
Location: Marin County, CA
Posts: 6,439
Reputation:
Rep Power: 18
Solved Threads: 339
Hey bobbyraw,
Just FYI: the post you quoted and responded to was posted 1 1/2 years ago; it's doubtful that that particular member (who is a different member than the latest poster) is still waiting around for an answer
Just FYI: the post you quoted and responded to was posted 1 1/2 years ago; it's doubtful that that particular member (who is a different member than the latest poster) is still waiting around for an answer
"May the Wombat of Happiness snuffle through your underbrush."
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
- Ancient Aborigine blessing
Please do not contact me by email or PM for help. We're all volunteers here, and only have so much free time to dedicate to our efforts.
However, if I've been working on a thread with you already, and seem to have "forgotten" your thread, please do send me a message. I try not to let things slip through the cracks, but it does happen sometimes.
•
•
Join Date: Jan 2008
Posts: 385
Reputation:
Rep Power: 1
Solved Threads: 5
Posting Whiz
that's right!!! The poster who had the problems probably has a new pc now- LOL!!!
Use my suggestions at your own risk, I'm not responsible for the results. Always back up your data and registry frequently.
Also, pop into my website at http://forumdude123reviews.webs.com
Also, pop into my website at http://forumdude123reviews.webs.com
|
•
•
•
•
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
•
•
•
•
•
•
•
•
DaniWeb Windows NT / 2000 / XP / 2003 Marketplace
Linear Mode
•
•
•
•
apple browser cd choose computer crack data debian dell development download drive fiji hard hitachi install internet leopard license linux microsoft mobile news office open operating os photo reactos registry security server software source spyware storage survey system technology terabyte torvalds tweaks ubuntu unix upgrade vista windows windows update windows vista xp
- I want to reinstall windows xp and get rid of everything on the hard drive (Windows NT / 2000 / XP / 2003)
- Installing ide hard drive with sata hard drive (Storage)
- hard drive and usb cdrw not recognized in DOS (Storage)
- help wanted with installing slave hard drive (Storage)
- Windows repair won’t locate the hard drive (windows 2000) (Windows NT / 2000 / XP / 2003)
- I can't see my hard drive (Storage)
- Installing 2nd SATA hard drive, but it won't let me! (Storage)
Other Threads in the Windows NT / 2000 / XP / 2003 Forum
- Previous Thread: Installing Windows XP on a 500gb Harddrive
- Next Thread: VPN Issue
