Linux Mint So I'm trying to learn French but I'm running into some complications when it comes to finding a good keyboard layout. Here are the layouts that I've tried so far: English (US) English (international Alt Gr dead keys) English (UK, international with dead keys) English (UK, extended WinKeys) So far all have fallen short of what I need. I think only one of these listed above will allow me to type in the French c with a tail character ç. Most of the rest allow áéíóú, the problem here is that most of these accents are going the …

Member Avatar
Member Avatar
+0 forum 7

I have recently discovered that my music directory and the micro sd card that's in my hand held media player (iBasso DX50) are not in sync, I don't have any idea how that could have happened. There are songs in both my music directory that are that are not on the sd card as well as a few songs that are on my sd card that are not in my music library. I've always used rsync either directly or through the program LuckBackup to keep everything in sync so again I don't know how this could have happened. Note that …

Member Avatar
Member Avatar
+0 forum 5

I recently purchased Terra-Master F4-220 but I can not sign in via ssh. I thing is I don't think it's on the TM end, I think it's on my debian server's end. When I do try and connect this is what I get. $ssh root@192.168.1.2 /etc/ssh/ssh_config: line 55: Bad configuration option: permitrootlogin /etc/ssh/ssh_config: line 55: Bad configuration option: allowusers /etc/ssh/ssh_config: terminating, 2 bad configuration options Here is a sample of the tail end of the /etc/ssh/ssh_config file. PermitRootLogin yes AllowUsers root garrett media plex rsync Any ideas as to what the problem could be. I purchased the TM becaue I …

Member Avatar
Member Avatar
+0 forum 1

Today I just put a new SSD in my desktop. I did have a little trouble booting up the OS because I had plugged the DVI into the wrong port, when I couldn't see the monitor I did end up turning off the computer several times before I finally found the problem. I don't know if the problem occured when I was physicaly in the box or during boot when I turned it back off several times but now my system will not boot. The grub screen does display but after selecting the Linux Mint option it goes to a …

Member Avatar
Member Avatar
+0 forum 9

I've been using rsync and or luckybackup for a while now to sync my desktop's music library to my micro sd card for my digital music player. Today I noticed that my music player wasn't showing one of my albums so I've started investigating and I've found that it's not the music player but is more likely to be rsync, but I don't understand how or why. After syncing I check the sd card manually and sure enough this album is still not beeing synced. On my computer all of my music is stored at `/home/me/media/music/*` inside of this last …

Member Avatar
Member Avatar
+0 forum 15

Hello. I am a newcomer to Daniweb and need some advice. I've been using Ubuntu regularily on several PCs and note books installing without problems until now. I have just purchased an Acer Aspire ES 11 (ES1-132-CONU) that is using an Intel Celeron Quad Core 3450 processor launced Q3'16 possibly from the Kaby Lake 7th gen batch. Installation USB /CDs for versions 14.04 and 16.04 won't boot. Version 16.1 will boot and I can go thru the 'try without installing' and without any problem. Then after adjusting the Windows 10 partition, etc. and installing Ubuntu 16.1, can only boot to …

Member Avatar
Member Avatar
+0 forum 5

A while back I built a computer with an Asus motherboard, a SSD, and two milk creates for a cheap case, and I had Xubuntu installed on it. I have tried to install Xubuntu on it again several times today but it always fails to create the partitions. I keep getting an error -> 'Creation in partitoin # x (0,0,0) failed' or something like that. Then after this happens the computer will not even boot back into the live USB Ubuntu again or even the BIOS, all I get there after is a black screen with a blinking white cursor …

Member Avatar
Member Avatar
+0 forum 5

How i can `sed` save pattern matches to variables and do something with it? eg $ echo "string_4.3.2" | sed 's/^string_\([0-9]\)\.\([0-9]\)\.\([0-9]\)$/\1 \2 \3/' output "4 3 2" but I want to pass variables to function eg do_something() { echo $1 echo $2 echo $3 # ..... # ..... } string="string_4.3.2" if [[ $string =~ `sed ??????` ]]; then do_something "$1" "$2" "$3" fi Matched numbers need pasing to method "do_something"

Member Avatar
Member Avatar
+0 forum 1

I recent created a .vimrc file in my home directory because in addition to syntax highlighting and auto indention I also wanted my tabs to be four columns wide and to be tabs and not spaces but now that I have my file setup I am unable to use backspace to remove a newline. When I start backspacing a line the cursor stops at the beginning of the line and will not delete the line move to the end of the line above. Any ideas? " All system-wide defaults are set in $VIMRUNTIME/debian.vim and sourced by " the call to …

Member Avatar
Member Avatar
+0 forum 4

` #include<stdio.h> #include<conio.h> #define max 25 void main() int frag[max],b[max],f[max],i,j,nb,nf,temp,highest=0; static int bf[max],ff[max]; clrscr(); printf("\n\tMemory Management Scheme - Worst Fit"); printf("\nEnter the number of blocks:"); scanf("%d",&nb); printf("Enter the number of files:"); scanf("%d",&nf); printf("\nEnter the size of the blocks:-\n"); for(i=1;i<=nb;i++) {printf("Block %d:",i);scanf("%d",&b[i]);} printf("Enter the size of the files :-\n"); for(i=1;i<=nf;i++) {printf("File %d:",i);scanf("%d",&f[i]);} for(i=1;i<=nf;i++) for(j=1;j<=nb;j++) if(bf[j]!=1) //if bf[j] is not allocated temp=b[j]-f[i]; if(temp>=0) if(highest<temp) ff[i]=j; highest=temp; frag[i]=highest; bf[ff[i]]=1; highest=0; printf("\nFile_no:\tFile_size :\tBlock_no:\tBlock_size:\tFragement"); for(i=1;i<=nf;i++) printf("\n%d\t\t%d\t\t%d\t\t%d\t\t%d",i,f[i],ff[i],b[ff[i]],frag[i]); getch();

Member Avatar
Member Avatar
-2 forum 1

What it says on the tin. When the system (without logging into X) detects a change in internet accessibility, I'd like to set a hook to execute a script. EDIT: Every single bloody time... So, [dhcpcd-run-hooks](http://roy.marples.name/man/html8/dhcpcd-run-hooks.html) exists... is that the preferred method or can anyone recommend something else that's - in their mind - better? 2nd EDIT: I really am asking these questions. It's just that, in the process of writing the posts, I think of a different way to google the question and the answer magically appears.

Member Avatar
+0 forum 0

What it says on the tin. I'm looking for a good voice/chat server I can run on a RasPi 3 running Raspbian Jessie. TeamSpeak is Intel only as best I can tell. EDIT: Dangit. Every single time I jump on this forum thinking "These guys will know, but let me do a little bit more research first while I write this question..." Apparently Mumble's server Murmur can run on RasPi. nvm

Member Avatar
Member Avatar
+1 forum 1

`grep -v "#EXTINF:" All.m3u | sed 's#../##'g` I'm using the line above to try and make the playlists that I export from Banshee compatible with my digital music player. When I run the sed portion of this script I'm trying to remove the portion of the path up to where the music directories actually start. I jus want the .m3u file to be a list of lines containing Artists/Album/Title.flac But when I run this script it's removing all of the forward slashes /, not just the beginning ../ Can anyone tell me why it's removing all of the forward slashes …

Member Avatar
Member Avatar
+0 forum 1

I'm on latest Kubuntu. Here I am with English US keyboard input. But I'd like to install say Norwegian, Polish, Japanese, whatever. I decide the easiest step. Which is to search "input". "Input Method" sounds promising. I run it. Then I get window. That says: Current configuration for the input method: * Active configuration: missing (normally missing) * Normal automatic choice: none (normally ibus or fcitx or uim) * Override rule: zh_CN,fcitx:zh_TW,fcitx:zh_HK,fcitx:zh_SG,fcitx:ja_JP,fcitx:ko_KR,fcitx:vi_VN,fcitx * Current override choice: (en_US) * Current automatic choice: none * Number of valid choices: 1 (normally 1) The override rule is defined in /etc/default/im-config. The configuration set …

Member Avatar
Member Avatar
+0 forum 2

I just purchased an 240 GB SSD for my older Toshiba Satellite. I would rather not go through trying to save the files from the HDD and install the Linux Mint Debian Edition and then move all the files back, I would like to just be able to clone the HDD to the SSD. Can anyone give me any direction on that? Thanks. ALso, I'd like to maybe get some new memory for the laptop and if possible maybe a CPU as well but I know that's less likely. Here's my laptop -> https://www.cnet.com/products/toshiba-satellite-l355d/specs/ After looking over the specs it …

Member Avatar
Member Avatar
+0 forum 4

Linux Mint (Ubuntu). I'm looking for a way to encrypt some of my external HDDs. I was looking this option over -> https://www.howtoforge.com/tutorial/encrypt-your-data-with-encfs-on-ubuntu/ but I'm not sure how well this would work. I read this on the top portion of the site -> "It is a pass-through filesystem, not an encrypted block device, which means it is created on top of an existing filesystem." What exactly does that mean. I also noticed that the encfs program (encfs) mounts to the encrypted/decrypted directories and since I will be having to mount an external HDD it looks to me like I would …

Member Avatar
Member Avatar
+0 forum 3

(short version of the story) I'm using Kubuntu in BIOS Legacy State as this was the only way I could see USB option in Boot Menu (F12). And it was the only way I could install Kubuntu from USB, from boot. I "burned" USB using OEM Windows 10 and told Kubuntu to take entire disk (effectively wiping out all bloatware). If I enable BIOS UEFI mode, I see "No Bootable Device" icon because Linux and UEFI don't like one another(?), and already mentioned, list of bootable devices disappear (In Legacy Mode, there are 5 positions, HDD, USB, network etc., in …

Member Avatar
Member Avatar
+0 forum 7

I have an older Toshiba Satellite laptop with Linux Mint OS installed. It pretty old and it's starting to show as it's getting slower. It's got a bigger screen and it's even got the num pad on the right of the keyboard in addetion to the numbers at the top. I thought about getting a new one but this has been a good computer and it's built very sturdy, I worked at Best Buy for about 6 months and I didn't see many built this sturdy. So I thought I might just put a few new parts in it to …

Member Avatar
Member Avatar
+0 forum 6

Is it possible to create our own hosting using a server computer with good hardware configuration. If we install Linux server or Microsoft server edition like OS inside a computer, will it turn into hosting Server like Hostgator, godaddy etc. For example, If we create a website inside a localhost, server computer, how it will be accessible to other users. I am a php developer.

Member Avatar
Member Avatar
+0 forum 1

Hello everyone. I realize that this may be an elementary question, but all of my searches for answers have not given me a satisfactory result. In my ubuntu server machine, I typed in [after examining my stty settings] `werase='^I'` as I was configuring the terminal to my likings. All was fine after I made that change and the command worked beautifully. After I logged out and logged back in, I could not use that shortcut anymore and I had to manually reprogram it to use it again. Could anyone suggest how I can fix this problem and make the setting …

Member Avatar
Member Avatar
+0 forum 3

Online file hosting. I click "Upload File". I select correct file. I click "Open". File gets uploaded. I log out. What else does hosting get to know? (besides name, modification timestamp, creation timestamp, content, extension and length of upload file etc.) Assuming running Linux Ubuntu/Arch/Whatever, on Mozilla Firefox or any other open-source browser with no obvious exploited vulnerabilities.

Member Avatar
Member Avatar
+0 forum 2

hai am new to linux.i like to learn from this forum

Member Avatar
Member Avatar
+0 forum 3

Good Day DaniWeb Users, I'm having hard time to mount my 3 TB External Hard Drive/Disk I do mount my external hd using this command.. sudo mount /dev/sdc1 /media/Archive/ I do df -lh and seen my mounted device. Here is my Problem: 1. When I enter fdisk -l ~ I saw a warning: WARNING: The size of this disk is 3.0 TB (3000558944256 bytes). DOS partition table format can not be used on drives for volumes larger than 2.2 TB (2199023255040 bytes). Use parted(1) and GUID partition table format (GPT). what would be the problem? I do format it in …

Member Avatar
Member Avatar
+0 forum 10

[[Click Here](https://social.msdn.microsoft.com/Forums/en-US/7dd0ac62-e1f6-42ee-ab09-7d702b6a7f06/support-for-quickbooks-1844-556-6315?forum=sharepointadminprevious)](http://wwwhttp://www.fodors.com/community/united-states/say-hello-to-support-for-quickbooks18445566315.cfm)QuickBooks Toll Free, Intuit@(1-844-556-6315)QuickBooks Tech Support Phone Number provides online solution for all USA/CANADA clients. For any help of query call 1 844 556 6315 to get all QuickBooks account solution. @@Call, 1-844-556-6315 for all type help by QuickBooks tech support phone number, Intuit QuickBooks Tech Support Phone Number, QuickBooks Help Desk Phone Number, QuickBooks tech support number, QuickBooks technical support phone number,@@@ QuickBooks phone number, QuickBooks technical support number, QuickBooks support phone number, QuickBooks technical support, QuickBooks Customer Service Phone Number, QuickBooks Customer Service Number, QuickBooks Customer Support Phone Number, QuickBooks Customer Support Number,@@@@ QuickBooks Customer Service Helpline …

Member Avatar
+0 forum 0

In Linux, what's the difference in a service and a daemon? I know a daemon is a long running process without a terminal, meant for servicing things such as requests from other processes or server type services such as a web server or dns server. I understand that you can change the runlevel, and modify the different things which get executed at each runlevel. However, service doesn't make sense. In the Windows sense of a service, it's almost the same thing as a daemon in Linux. In Linux, what role does a service fill that a daemon does not? It …

Member Avatar
Member Avatar
+0 forum 1

Canada Base Dedicated SERVER,USA Base Dedicated SERVER,Singapore Base Dedicated SERVER,Netherland Base Dedicated SERVER,New York Base Dedicated SERVER,Germany Base Dedicated SERVER,France Base Dedicated SERVER,Russia Base Dedicated SERVER, Hong Kong Based Dedicated Server,Private Cloud Servers,Cloud Hosting ,Cloud Computing Compare Our Dedicated Services With others. VPS........Cloud VPS.......Dedicated Servers........Private Cloud Servers http://blisshostingco.net/dedicated-hosting.html http://blisshostingco.net/vps-hosting.html http://blisshostingco.net/private-cloud-server.html http://blisshostingco.net/cloud-hosting.html http://blisshostingco.net/cloud-vps.html http://blisshostingco.net/hosting.html (Dedicated Server delivery Time 5 To 8 Hours)

Member Avatar
+0 forum 0

Hello, I am trying to remove the www. at the beginning of our domain name via .htaccess. I'm doing it like this: [code]RewriteCond %{HTTP_HOST} ^www\.domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com/$1 [R,NC][/code] It seems to word wonderfully. I would like to retain the www. when someone accesses the site securely with https. I found a bit of code on the web that described how to force the www. except on a certain folder ("blog" in this case): [code]RewriteCond %{HTTP_HOST} !^$ RewriteCond %{HTTP_HOST} !^www\.domain\.com$ [NC] RewriteRule !^blog(/.*)?$ http://www.domain.com%{REQUEST_URI} [R,L][/code] I thought if I changed it a little, I could make at least a …

Member Avatar
Member Avatar
+0 forum 1

garrett@mint-desktop /var/www/html/udemy/php-oop/gallery/backups $ tar --exclude-tag-all=backups -cf lesson20.tar ../* tar: Removing leading `../' from member names I have an empty file called backups in my backups directory to keep the tar file from trying to backup itself. Does anyone know why I'm getting this output? -> `tar: Removing leading ../' from member names` Note that there was a backtick between leading and ../ .

Member Avatar
Member Avatar
+0 forum 5

Greetings, I am a windows OS user, however, I installed a VMware and I need to install Linux OS on a virtual machine. I searched for Linux official website to download the lastest version of the OS from it and unfortunately I did not find, or I could not be able to reach one and those are the links I got, in addition, I do not know is the Linux mint and if that the new Linux OS [Click Here](https://www.linux.com/) [Click Here](https://www.kernel.org/) [Click Here](http://www.linuxfoundation.org/) [Click Here](http://www.linuxmint.com/) If could someone help me to download the Linux OS

Member Avatar
Member Avatar
+0 forum 10

Linux Mint 17 I have recently download the SFML library but I don't know where to put the files. There is a lib directory and an include directory. The lib directory appears to have a lot of sym links in it. garrett@mint-desktop ~/Desktop/SFML-2.3.2/lib $ ls -l total 904 lrwxrwxrwx 1 garrett garrett 20 Oct 27 17:10 libsfml-audio.so -> libsfml-audio.so.2.3 lrwxrwxrwx 1 garrett garrett 22 Oct 27 17:10 libsfml-audio.so.2.3 -> libsfml-audio.so.2.3.2 -rw-r--r-- 1 garrett garrett 144296 Sep 11 06:40 libsfml-audio.so.2.3.2 lrwxrwxrwx 1 garrett garrett 23 Oct 27 17:10 libsfml-graphics.so -> libsfml-graphics.so.2.3 lrwxrwxrwx 1 garrett garrett 25 Oct 27 17:10 libsfml-graphics.so.2.3 -> …

Member Avatar
Member Avatar
+0 forum 4

The End.