0

When I tried to install panther on to my lap top. It failed. After disk 2 it said insallation complete and to restart. I did but I keep getting a notice to resart and I do not get to the desktop. I tried starting from the first install disk and indicating the new start up disk. Does not help. Do I need to reinstall and what about disk 3?

3
Contributors
3
Replies
4
Views
13 Years
Discussion Span
Last Post by malayarock
0

I have never encountered this problem. I would run Disk Utility from one of the setup disks and check for errors on your startup disk. If that doesn't work, make sure the install disks aren't scratched at all and then go ahead and reinstall. :(

0

I have never encountered this problem. I would run Disk Utility from one of the setup disks and check for errors on your startup disk. If that doesn't work, make sure the install disks aren't scratched at all and then go ahead and reinstall. :(

Thanks. About disk 3, is that part of the install or a disk of goodies.

0

Thanks. About disk 3, is that part of the install or a disk of goodies.

just some scanner, printer etc driver. i dont even need those

This topic has been dead for over six months. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.