Pls help.. I cannot open my wifi pocket after i changed my password..

Member Avatar
Member Avatar
+0 forum 2

After a storm and reset, lost user name and password. Now can't get either user name or password to connect on my phone. Want to put original user name back in as well as the password.

Member Avatar
Member Avatar
+0 forum 2

Hi, I'm trying to change some DNS records on GoDaddy so the website for a domain name is hosted by a different company but still ensure that the e-mail service that GoDaddy hosts for that domain is not interrupted. I have worked with the basics of Name Servers and NX records before but I am cloudy on how to do this. Thank You.

Member Avatar
Member Avatar
+0 forum 2

How to login 192.168.1.254?

Member Avatar
Member Avatar
+0 forum 1

admin

Member Avatar
Member Avatar
-1 forum 3

Hello, I have a local domain server, managed via a Windows Server 2003 R2 SE machine, and would like to be able to broadcast messages as an administrator to all client PCs which are connected to the domain, whereby the message will just pop-up on the users' screens, and either an OK button appearing or it automatically times out. e.g. 60 seconds, and closes by itself. However, in doing so, no additional software should be installed on the client PCs to receive the broadcast, as the internal policy is to strictly prevent "chat-communication" between users using third-party software. Any way …

Member Avatar
Member Avatar
+0 forum 4

Hi All, I am looking for a design approach to implement TCP socket server which is going to serve requests based on multiple ports. (1) port1 : dedicated for video streaming (2) port 2: dedicated for audio streaming (3) port 3: dedicated for data streaming. In above scenario do i need to create single server to take care with multiple port request or diff-2 server needs to be created for diff-2 request based on port configuration. Is there any design strategy where connection pool of sockets can be created to serve above mentioned port based requests? i appreciate if any …

Member Avatar
Member Avatar
+0 forum 8

I've had this networking problem for a while and it's interfearing with another networking problem. I can share a folder on Computer(A) running Windows10 and have Computer(B) running Windows10 access the shared folder; although I can't share a folder on Computer(B) and have Computer(A) access the shared folder, or any shared folder for that matter ? I read it may have to do with DHCP although that at this point is speculation and I don't want to tinker with something just to spin another problem.

Member Avatar
Member Avatar
+0 forum 21

If all computers are on a network sharing the same network name. The only group or userName I can assign to the network is; everyone. How can I give each computer it's own unique name that is only specific within the Share permissions for a Group or Username ?

Member Avatar
Member Avatar
+0 forum 40

Hi, New to the forum and I hope I can get some help in the venture in achieving my CCENT/CCNA. I have done lots of research and been have come to the conclusion of using: 3x 2621XM's or 3x2821'S (Routers) 3x 3750 / 3350 (Switches) I eventually want to venture into CCNP onwards and was looking at the Cisco 2901/2921 etc but would that be overkill as would like to futureproof myself by spending the little extra. In all fairness the model hierarchy really confuse me in the Cisco world so any advice would be greatly appreiciated. I have looked …

Member Avatar
Member Avatar
+0 forum 7

Hello, hope someone could possible help me. I have recently upgraded my PC with a new: -Motherboard -CPU -GPU -RAM Since this I haven't had any signal to my monitor. I have made sure all the cables are in the correct places and I have tried my other graphics card to see if it was the graphics card(still no joy). The motherboard lights all light up and the HDD drives and all the fans work. The only thing I can think of is I haven't installed my motherboard drivers with the CD you get provided with the motherboard. I haven't …

Member Avatar
Member Avatar
+0 forum 3

hey guys .i have the same probleme with my alfa network....; alfa network model AWUS036h,when i plug it to computer using 5 meters usb cable it show me the message: usb device not recognized,any advice that can help??

Member Avatar
Member Avatar
-1 forum 3

I want to stream some random data from a wifi chip to another ip(cellphone or tablet). How shall I do it?I want to stream data at 30mbps or more. The hardware that I want to use is first a laptop ( make it send via a router to another computer). Then I want to replace the transmitting laptop with an arduino with wifi chip or raspberry pi with a wifi chip. What shall I do on the software side to begin with on the laptop?

Member Avatar
Member Avatar
+0 forum 1

Hi ! I feel a little dumb, as I am trying to understand something which seems evident to everyone, and so that I cannot find a clear answer. I hope you guys could enlight my questions: I am trying to figure out how can a server handle multiple entrant connections. For instance, how work a Database Server to accept parallel requests and answer them, with sometimes big data, while only 1 port is available for this. I imagine my 'SELECT' request arriving to the port 1234 of my DB server. This would lock the port 1234 to my connection, until …

Member Avatar
Member Avatar
+0 forum 2

I just signed up for Comcast for an apartment I'm renting in California. (Yes, I'm bicoastal now ... I own my place in NYC and I rent here in downtown Palo Alto.) Either way, I went to the Comcast store and got a little self-install kit that comes complete with coax, HDMI, cable wall huggers (or whatever you would call them), and even coax splitter. I thought it was so cute!! I'm not used to not having to wait a week for the cable guy. Better yet, I'm not used to the cable company thinking highly enough of its customers …

Member Avatar
Member Avatar
+0 forum 8

I am having some problems with my nokia X2DS Regards 3G connectivity

Member Avatar
Member Avatar
+0 forum 2

hello when i ping Facebook.com it shows this below.. Microsoft Windows [Version 6.1.7601] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\OVN>ping facebook.com Pinging facebook.com [127.0.0.1] with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\OVN> i would like to access it but am failing, since its not listed …

Member Avatar
Member Avatar
+0 forum 8

Most of us know how Symbolic links work, they point to another file or folder on the system. Symbolic links don't work with network folders. You can create a symbolic link on a networked folder to point to a local drive. The result is you point the local folder to the network drive, instead of the other way around. I'm looking for a similar method that works, the other way around ?

Member Avatar
Member Avatar
+0 forum 7

I want to know the keywords/password of wifi

Member Avatar
Member Avatar
+0 forum 4

I don't know what else to do, I've tried everything I've seen on the Internet, so I need some help. Also, I'm not good with computer lingo, so try to dumb it down for me, okay? Lol

Member Avatar
Member Avatar
+0 forum 3

i want to know that after switching off my static ip option in phone ,, why my wifi is not accessing ?

Member Avatar
Member Avatar
+0 forum 2

I've been in Palo Alto, CA for a long time now. Since October. When I left, I had Time Warner Cable at my apartment in NYC. Looks like I'll be going back to Spectrum with a whole new service line-up. What can I look forward to? Anyone use them?

Member Avatar
Member Avatar
+0 forum 3

In an office environment, how would one make certain apps or sites faster than others? Let's say make google faster than youtube or facebook, for everyone in that office. Please let me know if this is in the wrong section or if I am not clear enough. Thank you in advance.

Member Avatar
Member Avatar
+0 forum 4

Hello DaniWeb Community, I've recently switched to a cable internet service and with the modem/router [our provider](https://www.iinet.net.au/) sent us which is a modem/router and the parental controls on it are crap so I've had to hook up our old router for the kids (dedicated for them). So what I'm wanting to do is have access to all three routers on the network, here is a layout of the network. ![Network.png](/attachments/small/3/6850849e4f534e3a8d7ce419fa386833.png) Key: **1** is the bungalow **2** is the main modem/router **3** is the kids router (because as I said before the main router has crap parental controls) So I'm wanting …

Member Avatar
Member Avatar
+0 forum 6

Hello Daniweb Community, Lately we have been experiencing slow internet, now the thing is. In the house we have **12 devices** connected, then from the router it goes out to the bungalow which has around **5-7 devices**. The router we have in the house is a TP-Link Archer D50 and in the bungalow is a TP-Link Archer C2 and we have **ADSL2+** (on the [Optus](http://www.optus.com.au) network). The maxium speed we were told we're getting is around **6-7Mbps/Download** and around **500-600Kbps/Upload**. The other problem we are having is, my sister can't even get a good connection on her PS4 (can't even …

Member Avatar
Member Avatar
+0 forum 5

Hello, I have a problem with getting ip camera pictures in a browser from internet. IP camera is on address 192.168.4.44, port 5566 My computer is on 192.168.4.10. My router is on 192.168.4.1 and is registered on no-ip service. Also, I have port forwarded 5566 in my router. Xampp is listening on port 5566. I have created php file and placed in xampp server. Inside php file is connection string to camera ip, port, username, password just to get a picture in php file so it could be previewed in browser. Locally I can view camera contents in the browser. …

Member Avatar
Member Avatar
+0 forum 1

hi guys I need help with our homework. How do I put password in packet tracer? and also what is a AMY and AU router?? Here is the complete instructions our prof gave us when he left for a meeting. Also how do you make it max of 2 users at a time for remote access? Somebody explain me how to do those lines in red only. Cheers! IP BLOCK: 172.201.56.75 / 14 DTE, END DEVICE - FIRST USABLE DCE, ROUTER LAN - LAST USABLE BANNER: "KEEP OUT" CLOCK RATE: 64000 [COLOR="Red"]PASSWORD: (TELNET, CONSOLE): CISCO <-- TYPE7 ENABLE PASSWORD: CISCO …

Member Avatar
Member Avatar
+0 forum 7

What is WIFI channel in router device? May i know the function of WIFI channel in router device?

Member Avatar
Member Avatar
+0 forum 3

i Have used thread concept to handle multiple connections. But It's not working for multiple clients. please help me // Server code #undef UNICODE #define WIN32_LEAN_AND_MEAN #define _WIN32_WINNT 0x501 #include <windows.h> #include <winsock2.h> #include <ws2tcpip.h> #include <stdlib.h> #include <stdio.h> #include <pthread.h> // Need to link with Ws2_32.lib #pragma comment (lib, "Ws2_32.lib") // #pragma comment (lib, "Mswsock.lib") #define DEFAULT_BUFLEN 512 #define DEFAULT_PORT "27015" void *connection_handler(void *); int __cdecl main(void) { WSADATA wsaData; int iResult, *new_sock; SOCKET ListenSocket = INVALID_SOCKET; SOCKET ClientSocket = INVALID_SOCKET; struct addrinfo *result = NULL; struct addrinfo hints; int iSendResult; char recvbuf[DEFAULT_BUFLEN]; int recvbuflen = DEFAULT_BUFLEN; // Initialize …

Member Avatar
Member Avatar
+0 forum 2

I have a home lab I am trying to configure multiple subnets on and use Routing and Remote Access LAN Routing to get everything talking. I have two hosts w/ 5 physical NICS running Hyper-V. I have the NICS configured on each host so they each are in a different subnet. Example Host 1 NIC 1 10.10.10.1 Host 2 NIC 1 10.10.10.2 Host 1 NIC 2 10.10.20.1 Host 2 NIC 2 10.10.20.2. I can ping the IPs of each hosts nic from each other. So I know the two hosts are communicating. I setup a RRAS server with 5 virtual …

Member Avatar
+0 forum 0

The End.