I have a 2012R2 Server, it is currently on two GB NICs Teamed, one of the bespoke software is really old, more like a Btreive type flat DB and it is currently holding over 1 Million + records. We have 30 workstations, and while we know the software is either badly written or it is generating a lot more traffics than a standard SQL, we need to find a way to ‘fix’ this. The server is a Xeon 3.3GHz/16GB/4x1GB on Adaptec RAID10 (Avg read/Write is 250-350Mbps) I added the second NIC to team few months ago after yet another software …

Member Avatar
+0 forum 0

I have a home lab I am trying to configure multiple subnets on and use Routing and Remote Access LAN Routing to get everything talking. I have two hosts w/ 5 physical NICS running Hyper-V. I have the NICS configured on each host so they each are in a different subnet. Example Host 1 NIC 1 10.10.10.1 Host 2 NIC 1 10.10.10.2 Host 1 NIC 2 10.10.20.1 Host 2 NIC 2 10.10.20.2. I can ping the IPs of each hosts nic from each other. So I know the two hosts are communicating. I setup a RRAS server with 5 virtual …

Member Avatar
+0 forum 0

Hi, I want to redirect my sub doamin blog.adityabevoor.com to a folder called blog. I need apache directives to edit .htaccess file. can you help me out please? Thanks

Member Avatar
+0 forum 0

Hi, I am trying to disable a forwarder in a mailbox under exchange server 2010 on server 2008 R2 x64 on Hyper-V. When I try to remove the forwarded email in the mailbox and click on apply or OK, I receive error which says, "you must provide a value to this property". I am getting same error in cmdlet commands. When I try to collect organizational health, I get same error in last third phase. If I try to remove mailbox, disable it or even I try to create new mailbox, I get the same error msgs says provide value …

Member Avatar
+0 forum 0

Hello I'm a newbie in SQL I have one pos system on my bar that work with ms sql server 2005 express On sql has one table with some settings.One from this settings can enable the software an html5 interface and the waiters can take orders via tablet or smartphone. i have seen this software on other bars that works like this and asked them how they do.they give me a link which used for mobile orders http://10.125.125.120:8080/ArtikujGrupe.aspx Can anyone help me with this one.Can software work with aspx even if it has no file with aspx extension inside app …

Member Avatar
+0 forum 0

We bring a clear overview of information and news related to nanotechnologies and research.

Member Avatar
-1 forum 0

Hi I am desperatly struggling lot to configure SMTP using iis 6 on windows 2008 server . i am following same procedure as per below http://www.vsysad.com/2012/04/setup-and-configure-smtp-server-on-windows-server-2008-r2/ but unable to send any mails . can any one help me?

Member Avatar
+0 forum 0

Free Web Hosting with cPanel up to 1 GB for one year from WHDMS.COM Cart page :- https://goo.gl/f9boM9 Use Promo Code – FWH100 Features of Free Web Hosting by WHDMS.com: 1GB Free Space 100GB Data transfer and Bandwidth 5 E-mail contacts and FTP accounts 5 MYSQL accounts can be created Daily auto backups 50 Installation Apps Free web hosting accounts within 60 seconds 24X7 Customer support Notifications and alerts for website monitoring 2-step authentication for future security Absolutely AD free Credit card not required No Hidden Costs

Member Avatar
+0 forum 0

OK, this is specifically regarding Cisco Catalyst 2900s, 4500s, and 6500s. I've always matched my interface VLANs to my VLANs. Lets say I have VLAN 10 on a 2900, and all hosts on it have IP addresses on 192.168.10.0/24. I'd create a VLAN 10 on my 4500 and an Interface VLAN 10 on my 4500, and put my gateway 192.168.10.1 (or whatever) on Interface VLAN 10. Between my 2900 and 4500, i'd trunk VLAN 10 and others. Then all hosts on 192.168.10.0/24 would be able to get to 192.168.10.1 as their gateway. I just looked at a config for a …

Member Avatar
+0 forum 0

I need some SSH help, from what I can remember, accidently I enabled a cloud feature on my NAS that put all existing files in the following folders, common problem amoungst many; \.wdmc\transcoded_files\944dfee7a3934671a1b910639b68a05a. The only solution is though SSH & delete the folders but keep the files that are hidden in these folders ? There are some solutions that I've found in my searches, I've been cautious as to if my data in the folders will be deleted.

Member Avatar
+0 forum 0

how to do intervlan with 5 vlan linked together

Member Avatar
-2 forum 0

I am new to the edgerouter and I know zero CLI which is hurting me quite a bit right now because I do not understand most of this, so here goes. I am running an Edgerouter ERLite running 1.6.0 FW and I have 2 modems from the cable company each putting out 50X5 dynamic plugged into eth0 and eth1. eth2 is the lan at 10.0.0.1/8. I ran the load balance wizard and I am online, but only through eth0. eth1 is only running a couple of kbps if at all. I did set up load balance and failover on PFSense …

Member Avatar
+0 forum 0

Can someone please give me an example code for a tkinker GUI of a reverse polish notation calculator written in python.

Member Avatar
+0 forum 0

Hi, We have two group in our office, Both group needs to access data from the server and both group is with internet connection. One is campus and the other one is for the heads. What i did before is i used different switch (and connect the each internet line to the each switch) on both the group and connect each switch to the different NIC on the server. Both group can access the internet. But a few days ago, the server cannot get internet connection and also one group cannot connect to the internet, But both group can still …

Member Avatar
+0 forum 0

Good day... As an aspiring System analyst...i would love to know how the experience is like...i love what i am learning but i dont have any experience yet. Where i live, in the Caribbean, most companies wants experienced persons, when students like me (just coming out of university) dont have experience. How can I familiar myself with the requirements for either a network administration, system analyst. Any advice?

Member Avatar
+0 forum 0

What are the channels used (802.11 b,g) in Egypt & why? What are the channels used in USA & why? can i use the channels which can i use by manuall configuration (can i changee these channels )??

Member Avatar
+0 forum 0

Handy if you want to get real traffic moving in and out of GNS3 http://youtu.be/kQmoWV1WaEc

Member Avatar
+0 forum 0

I have a problem of connection between two application ( with c++ builder ), the apps are working good in a local network, but aren't work in the internet, `cause both of the client and the server are in deferent routers, and each one have an internal & external IP, I think u understood me. So, I searched in forums and I found two solutions:    1 - NAT: I think you know it, it didn't help me, I got two problems:               N°1: is when you lunch your app in a cyber cafe for example, you can't access to …

Member Avatar
+0 forum 0

Lately I'm noticing that sometimes when I loged off my Gmail account, it got automatically log in, and moreover in my Facebook account it got automatically change from most recent feed to most popular Feed.Although, I did checked my history loged IP adress and found that The indicated IP address is only mine, no different divice or IP address had shown there. and I had my file and printing sharing option keep disable. Well, I am using XP sp 3. and my Question is, Is it possible for my local cable intenet service provider to simulteniously log to my account …

Member Avatar
+0 forum 0

So I have the following. peer1 netblock 64.96.192.0/24 nexthop 61.40.0.11 AS path 600 3001 6001 5001 4001 i peer2 netblock 64.96.192.0/23 nexthop 61.40.0.12 AS path 600 40000 4001 i With my knowledge I think the algorithm would choose peer2 because it has a shorter AS path, but I want to know if netblock netmask affects the algorithm in any way?

Member Avatar
+0 forum 0

hello there can someone explain to me in an easier way what are these im a new employee in in telecommunication company viop services SIP- CTI- RFC- PBX- IP PBX- PSTN- CRM- TAPI- API- in the most simplist form cause i cant really understand these pls bare with me thank you so muchhh :)

Member Avatar
+0 forum 0

echo off echo Testing the network IPNG WWW GOOGLE.COM ECHO ECHO PING COMPLETE ECHO CLS EXIT

Member Avatar
-4 forum 0

Hi everyone! I have spent many days for finding Intel P61/H61 Ethernet driver (for Win server 2003) but i haven't found the similar driver. Currently, i need it so much. If having a link or file, please send me to my gmail: long.hamanh@gmail.com. Thank you and Thank you so much!

Member Avatar
+0 forum 0

Hi Guys, I am looking for protocol conversion mechanism for my below requirement. Can somebody throw light on this as I am newbie for SNMP. I will appreciate your pointers for this requirement. Protocol Mapper: 1. The Mapper is a configuration file created by user to perform the protocol translation from/to SNMP to/from ISMP. 2. I want to create a mapper parser tool which does the following. a. Validate the mapper configuration file against MIB b. Validate the mapper configuration file agaist ISMP messages.

Member Avatar
+0 forum 0

hi my name is ravi, yesterday i bought a router asus RT-N14U installed it, wifi working awesome, and later i installed download master via modem in my Sony USB Pen Drive 16 GB. later i put a direct link in it for downloading, worth of 7.1GB. my internet speed is 256KBPS but in download master it don't go upper than 125 KBPS. i tried the same download on pc speed is good 256KBPS IN IDM And Google Chrome. Tried Reset the modem to factory reset and even reinstalled the download master a few times the prob is same. i called …

Member Avatar
+0 forum 0

Hi, I dont know if this is the right place to ask but I hope I find and answer to my question. I have two vps servers. One with the main domain name (example.com) and the other is serving mail.example.com. The example.com is serving the web server while the mail.example.com is serving the mail server and the mail client (roundcube). Now what I need help with is setting up the right DNS records to forward all the emails coming to example.com to mail.example.com droplet. So like the mail server is kinda working now and it can send emails. these are …

Member Avatar
+0 forum 0

Why does this happen: Cisco Router 1941 configured dual ISP Configuration with the help of IPSLA, While NATing packets sending through one isp and receving from another ISP.

Member Avatar
+0 forum 0

Hello, How I can bridge two calls in SIP by sending A party an indication to change SDP to B party and start playing the B party annoucement to A so A party will be hearing the ringing of B or annoucement of B. A Party SIP/GW B Party 1|---------INVITE---------->| | |<----------100------------| | | |------------IAM---------->|2 | |<=========Audio===========| | | |3 4|<------183 with SDP-------| | |<=========Audio===========| | 5| | | 6| | | 7| | | | |------------REL---------->|8 | |<-----------RLC-----------|9 10|-----------ACK----------->| | Is it possible to change the SDP and make the call communication between A and B directly in preanswer …

Member Avatar
+0 forum 0

![57584e18da6337a653024b88f1c61707](/attachments/large/4/57584e18da6337a653024b88f1c61707.JPG "57584e18da6337a653024b88f1c61707") May I know that what is the ACL as shown above doing? Why do we need deny any when we are permitting the specific ip address? Isn't that ACL list has a hidden "deny all" statement? Thank you.

Member Avatar
+0 forum 0

Hello, I am facing a very strange problem. Actaully, i have a server in wich Netgear Firewall is attached with a Internet Connection. Since last few days, Internet is working good, when i used it in Laptop with out connecting firewall. But when i tries to connect internet with firewall on my server, its not working. Even i tried to open Firewall settings, firewall login page was not opened. I tried 192.168.0.1(bydefaut one) and the another one(which was working last time) to open the page, but it displays a blank page. Now, i am not able to open firewall page, …

Member Avatar
+0 forum 0

The End.