Hi guys, I have a problem with my synology NAS that I can not seem to figure out myself. Everything seemed to work like a charm before, but when I took out my router from my network and put it in again things got ugly. Before I was able to ping the NAS and add it as a network disk in windows explorer. After, pinging goes wrong accept when I go to the web interface of the NAS at the same time as pinging. The disk can not be accessed through windows explorer anymore. Ping: > Pinging 192.168.0.123 with 32 …

Member Avatar
Member Avatar
+0 forum 2

Hi guys, I am trying to connect my PC to my NAS by using a network switch. My previous setup worked like a charm: switch |--> router --------|--> NAS --------|--> PC I could connect from PC to NAS without any problems. My new setup is no longer working: switch |--> NAS |--> PC I cannot see my NAS in the list of devices that are connected to the network. Anyone any ideas? Or is the router absolutely necessary for what I want to do?

Member Avatar
Member Avatar
+0 forum 6

Hi, I have a strange problem on a computer. I use a program that connects to a database that is located on the server. When I run the program, it can not always find the database and it returns an error. When I open windows explorer and go to the network path I can access it without problems. When I relaunch the program after doing this it can find the database. I do not have this issue on another PC. Anyone any ideas how to solve this? I assume a windows networking or settings issue?

Member Avatar
Member Avatar
+0 forum 5

Hi guys, I was wondering if anyone here has any experience with interfacing with a poct-1a device (specs on iso90.ir/phocadownload/csli/POCT1-A.pdf). I am a bit confused by this protocol: it specifies communication with POCT-1a compatible devices, but I don't see any communication protocols in this elaborate document, just descriptions of how it should happen and ASCII encoded files. Shouldn't there be any hexadecimal or bit code that describes the commands to and responses from the device? Kind regards, v.

Member Avatar
+0 forum 0

Hello peoplez, I am writing an application in vb.net using a mysql database. I need it to be multilingual. I have not found much useful info on this so I thought I 'd go ahead and work it out myself. I have started making a translation table in the mysql database consisting of the fields id, description, lang1, lang2 I would then use the proper language column according to the configuration. Not too hard upto this point. I was wondering if there is a good reason NOT to use the database, but in stead use plain text files. A good …

Member Avatar
Member Avatar
+0 forum 1

Hi guys, I was wondering about something: is there a way to communicate with another program/process on the PC without using files? What would this look like? Is there a search term I can use to get more info? This is not a vb.net question per se, but a general software question. Thanks! v.

Member Avatar
Member Avatar
+0 forum 3

Hi guys, I'm habing a problem with an access database i'm trying to fill programmatically with vb.net. I have a datatimepicker to set a date with a custom format like "dd/mm/yyyy hh:mm" If I insert this date in my access database the days and months are switched (mm/dd instead of dd/mm). What could be causing this? Cheers! v.

Member Avatar
Member Avatar
+0 forum 7

Hi guys, I'm trying to communicate with an external hid-compliant USB device. I've been looking for a way to do this, but I'm not getting anywhere. With the [url=http://www.lvr.com/hidpage.htm]Generic HID Tester[/url] I did not manage to get proper communication, allthough I got the application to recognise the device using the porper vendor id and device id I'm not sure how to translate (part of the communication protocol): [CODE]Type REQ Value Index Length 81 06 00 22 00 00 67 00[/CODE] into something vb.net undertands. the generic hid tester sends out bytes to the device. Anyone any ideas? kind regards, v.

Member Avatar
Member Avatar
+0 forum 1

Hello good people of vb.net, I'm experiencing problems with an application I'm writing. I have a login dialog that is loaded in the main form's load property, like this: [CODE] Private Sub FrmMain_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load ' show login if configured If My.Settings.login Then Me.Visible = False Dim dlg As New frmLogin dlg.Show() End If End Sub [/CODE] I make the main form visible from the login dialog if the login is correct. This works perfectly in another app I've written. In this one the main form automatically gets set to visible again after …

Member Avatar
Member Avatar
+0 forum 2

Hi guys, I writing this vb.net app using an mdi form. I want to be able to use ctrl+z and ctrl+y in my forms' controls. This is not working by default, allthough I read that it should. What could be the problem here? I do not have any code in my project for the keydown function so this can't be it i guess anyone any ideas?

Member Avatar
Member Avatar
+0 forum 3

Hi guys, I'm stuck at this query I'm writing. I'm hoping someone will be able to help me. I have 2 linked tables: subjects and visits with a relationship on subject_id: table subjects: Subject_id, name, birthdate table visits: Visit_id, Subject_id, parameter1, parameter2 Now I need to query that will get a result set of all subjects with the parameter1 and parameter2 of the latest visit_id. I could do it using a select all query for subjects and than querying the visits table for every subject, but I'm sure there is a way to do this in 1 query. Could anyone …

Member Avatar
Member Avatar
+0 forum 11

I'm following a course on vb.net and have visual studio 2008 from my school (msdn program) Unfortunately I'm having serious problems: apparently I can't use a lot of the common references. Eg.: If I try to use My.Computer.... the IDE does not recognise this. Same thing for System.Data... He gives an error but without proposing a solution for it, the thing is just not recognised. I can't add these references in the project's references either. Anyone an idea where the problem could be?

Member Avatar
Member Avatar
+0 forum 5

The End.