23 Discussion / Question Topics

Remove Filter
Member Avatar for
Member Avatar for Lp_baez

So I recently purchased 2 5k2k monitors to improve workflow for game development. I noticed once I run both displays the GPU gets hot and eventually the display goes black and the GPU fans go crazy. I also noticed that before that happens the GPU fans do not turn on …

Member Avatar for rproffitt
0
56
Member Avatar for stefh

Hi dear fellows, I requested from a friend (who sells machines) a PC, to remplace the current and old one I use, he proposed me a second hand PC which characteristics seem quite reasonnable, considering the price (300€ ~ 339.39 USD). My main concern is about he GPU, it's a …

Member Avatar for rproffitt
0
32
Member Avatar for conceptionavan

**Toshiba Satelite A100 - A105 Laptop** MODELS: PSAA9-0CU004 and PSB10U-SA10ES1 Bios 6.0B Nvidia Driver 307.68 RAM 4GB (3GB) GO 7300 64bit (NVIDIA's 307.68 driver for Windows 8.x. It is compatible with the Geforce 7300 Go and Windows 10 and with GeForce Experience dependant on Card for full operation) **FOR THE …

0
223
Member Avatar for Ali_46

I've been editing on a (windows based) desktop and now want and need to transition to notebook computers. I've been assured that notebook computers are now showing specs that can rival any desktop based system (if you have the $$$). Specially HP's Z-Book series which is built with video and …

Member Avatar for Kevin_14
0
293
Member Avatar for funkey100

Hey! I am making a new gaming computer (http://pcpartpicker.com/p/QLYy) and I have heard that nVidia is much better. I'm not going to use more than one monitor, and if I do, it'll only be two so the lower memory is too important. Which nVidia card should I get that's around …

Member Avatar for funkey100
0
275
Member Avatar for stanslous.mubaiwa
Member Avatar for Scorps91

Hello everyone at daniweb, I've had a bit of a problem with my computer recently but managed to get it up and running earlier today. Problem is, when I had it running, a message appeared telling me it was installing my Nvidia 8800GT card. Now, when this happened I figured …

Member Avatar for zemanelz
0
447
Member Avatar for mtostro29

Very recently, I let my laptop (HP) battery get too low, and it died on me. Usually, upon plugging in the adaptor, everything starts right back up again. However, this time, the laptop runs, but all I can see is a black screen. I can even hear the little chime …

Member Avatar for alicia.n.gallegos
0
503
Member Avatar for ibthevivin

I'm wondering if anybody has extensive knowledge about graphics cards. I basically need to find a laptop that can support all these softwares: AutoCAD 3D Max Maya Mud Box Adobe After Effects Adobe Photoshop From my research I've been running into the NVIDIA Quadro 1000M but there are only a …

Member Avatar for CimmerianX
0
279
Member Avatar for davi0011

I'm curious because I'm new to the world of buying computer parts and such. I've installed an Asus model of the Nvidia 550ti and I was wondering if I should use the Nvidia drivers or the Asus drivers. both drivers seem to work with only slight differences in the multiple …

Member Avatar for davi0011
0
255
Member Avatar for liordagan

Hello all. i am trying to setup for an OpenCL product, a LINUX worksatation. Here is the issue: I am using Fedora 15, I have an Acer monitor AL1717F, and using NVIDIA GTX 570. The monitor is a VGA port, and I amusing a VGA-DVI converter. The issue is that …

0
134
Member Avatar for stupendousomega

I bought an Nvidia 6200. It came with drivers on a disk, but I have win7, and it only supported Vista and XP, so I went on the site, and downloaded new ones that work on win7, but they won't install unless the card is in. I install the card, …

Member Avatar for flagstar
0
230
Member Avatar for 3825

nVidia has released new drivers and I am pretty sure Canonical has included it in its restricted packages already. However, whenever I use the nvidia drivers, the computer blacks out and there is no display at all. Can someone tell me what I need to do? Thank you

0
178
Member Avatar for TutorialCon

PC Model: imedia A2620 UK My CPU-Z Txt Report: [CODE]CPU-Z TXT Report ------------------------------------------------------------------------- Binaries ------------------------------------------------------------------------- CPU-Z version 1.57 Processors ------------------------------------------------------------------------- Number of processors 1 Number of threads 3 APICs ------------------------------------------------------------------------- Processor 0 -- Core 0 -- Thread 0 0 -- Core 1 -- Thread 0 1 -- Core 2 -- …

Member Avatar for SteveShing
0
385
Member Avatar for guru_iyer

I have a PC with following configuration: 1. Intel Core2 Quad Q6600 2.4GHz 2. nVidia GeForce 8800GT 512MB 3. Intel G33 Chipset MoBo 4. 3GB RAM 5. 350W PSU from Delta Electronics Inc. I am planning to upgrade my graphics card. Anything better than 8800GT but price lesser than (Rupees …

Member Avatar for jak0b
0
188
Member Avatar for louiscos77

Hi guys, I'm planning to make a car game & for that I'll use Microsoft Visual C++ 2010 for programming, directX 10 for the graphics, & Nvidia PhysX engine for the physics. The problem is that I can't find any tutorial of directX and Nvidia PhysX, I only find of …

Member Avatar for louiscos77
0
556
Member Avatar for SergioEspaillat

First of all Thank you for reading my post Here is the Basic Information that I know of my computer. CPU AMD Athlon(tm) 64 X2 Dual Core Processor 4200+, 2199 MHz 2GB's of Ram Current Video Card ATI Radeon X1550 Series (256 MB) I want to Know Which would be …

Member Avatar for SergioEspaillat
0
220
Member Avatar for SillyBilly

Nvidia Gforce 7600gt video cards, I have two running SLI. one of them quit after a year or so and I bought another to replace the one. The bios info on one card is "5.73.22.39.03" And the other is "5.73.22.51.45", notice the last two groups are different? Should they be …

0
124
Member Avatar for fallopiano

Hey everyone. Just recently I have been messing around with some files on my pc, trying to find a specific driver updater-program that was giving me some trouble. I went into add or remove programs, selected "NVIDIA Drivers" (I'm using a basic Nvidia graphics card), and removed it, thinking that …

Member Avatar for caperjack
0
228
Member Avatar for a_chap

Hi all. What should be the simplest of tasks is sending me crazy. I have a PC based on an ECS P4M900T-M2 motherboard. I've been using it for about a year using the on-board GPU. But now I want to add a second monitor so I bought a PNY 8400GS …

0
113
Member Avatar for aakaashjois

Hello, Which motherboard is recommended for nvidia gForce 9500GT and a Intel Core 2 duo E7500 processor?? Thanks

Member Avatar for The New Normal
0
169
Member Avatar for aakaashjois

Hi guys, I just got myself a Philips 20" TV Monitor(20PFL4122/98), but its resolution is too less(640X480). I have Windows 7 and everything comes really big! Is there any way I can increase the resolution?? I have a nvidia 7100GS graphic card.

Member Avatar for caperjack
0
188
Member Avatar for aakaashjois

I brought a new Philips 20" LCD Monitor. When I plugged in the monitor, the screen resolution was 1024X768. After I installed the nvidia card 7100GS driver, the resolution became 640X480. I am not able to increase it to any higher resolution. Every thing in the computer appears really big! …

Member Avatar for Bob_180_Bob
0
181

The End.