81 Topics

Member Avatar for
Member Avatar for p@rse

hey guys, me and the techs here are having a bit of an issue. We have a customers notebook. Old hardware but runs decent. It does not show the post screen when you turn it on. The cpu is fine, we tried multiple cpus so we know that isn't the …

Member Avatar for finito
0
153
Member Avatar for inquisitive2007

i use Dell inspiron 530 system with core 2 duo e4400 2 g hz processor. and 1 GB ram. vista home premium OS. now a days I face lot of problems during post boot up period(almost hang). when I check RAM in- computer->system it shows 501 MB RAM. This means …

Member Avatar for finito
0
182
Member Avatar for Teyz-M

Ok, so I have an old Dell Dimension C300. It originally came with 128mb of RAM. I purchased 512mb x2, and made sure that it was "PC133U-333-542", and 133mhz - Just like the 128mb module that came with it. I installed the new RAM, and the computer turns on, but …

Member Avatar for ragedsparrow
0
181
Member Avatar for Teyz-M

Right, so I installed a 512mb module, but it is only showing 64mb? Im sure its compatible, it is pc133-333-542, just like the 128mb that came with the computer. I upgraded my bios yet still no luck :( Thanks in advance

Member Avatar for zxor 2
0
261
Member Avatar for abacusdheda

i have gigabyte GA-945GCMXS2 motherboard, i have 512 mb(x1) of ram(DDR2-667) installed in one slot, and other slot is empty. I want to perform a memory upgrade(preferably 2gb in other slot), but the problem is the manual which came with it says it supports max 2gb, while the site[URL="http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2521&ProductName=GA-945GCMX-S2"]http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=Motherboard&ProductID=2521&ProductName=GA-945GCMX-S2[/URL] says …

Member Avatar for abacusdheda
0
244
Member Avatar for Richard7

Hi everyone, I recently bought a Gamers PC and I'm very happy with it, however I'm wondering about the transfer rate of the RAM, and not too sure if it's good enough... I'm running Windows 7 ultimate 64 bit, and the specs are as follows : - Radeon HD 5770 …

Member Avatar for caperjack
0
220
Member Avatar for bavant

Hey guys, After spending quite a bit of time on Newegg, I put together some parts for a computer that I'm building for a friend. The parts finally came in, I spent about an hour building the machine and decided to give it a try. When I cut the machine …

Member Avatar for ntlgnce
0
551
Member Avatar for casben79

I am looking to upgrade my RAM, I have a dell optiplex gx620 and it has the standard mainboard serial no: 0F8101 , I am looking for someone who really knows what they are talking about to let me know that this item on ebay will work ok (assuming it …

Member Avatar for kachimbo
0
246
Member Avatar for notuserfriendly

Hello, I recently decided to build a new computer ofr general/low gaming purpose. i have an ASUS M4A785TD-V EVO motherboard After assembling everything correctly i press the ON button. for 1 second everything lights up, the fans spin. and then its gone nothing happens. i try to press the button …

Member Avatar for dmusket
0
232
Member Avatar for secworld

I was told by one tech at Dell that my PC had a 1GB motherboard and it came with 256mb of RAM installed. I added another 512mb of RAM to the second slot (thinking that I couldn't exceed 1GB). Anyway, I have since found out that my motherboard is actually …

Member Avatar for michaelmast
0
141
Member Avatar for moosee21

Help! My hp dv6428 was running yesterday morning, but then it suddenly froze when I was not using it. I performed a hard reset, but the machine will not boot up. The power turns on, and I hear the disk spin for about 2 seconds, but then nothing else happens. …

Member Avatar for wqamar
0
182
Member Avatar for sujithy15
Member Avatar for keumgang
0
144
Member Avatar for parthibangemini

Do any of you know what is the difference between the two type of Rams, both are same DDR2 800MHz 2GB ram of same company specifically Transcend. why there is a change in the memory frequency 2:3 and 5:6 what are those. ------------------------------------------------------------------------------- DDR2 Transcend 2048 MBytes PC2-6400 (400 MHz) …

Member Avatar for whisk3rs
0
156
Member Avatar for kenth21v

my questions are: 1) is is possible to install a RAM like this: DIMM_A1(blue) populated DIMM_A2(black) populated DIMM_B1(blue) ------ DIMM_B2(black) ----- but the two RAM is not Identical.. 2)how about this one: DIMM_A1(blue) populated DIMM_A2(black) populated DIMM_B1(blue) populated DIMM_B2(black) ----- the RAM at the blue socket is identical, but the …

Member Avatar for crunchie
0
130
Member Avatar for dmartindale

Hi - my dell user manual (for inspiron 9400) says that it supports DDR-II RAM up to 667 MHz, but the recommended upgrade on the Dell website is for 800 MHz RAM. Is installing the "too-fast" RAM going to be a problem? Thanks for any help, Dave

Member Avatar for Crash~Override
0
181
Member Avatar for EddieC

While the competition is hard at work on a [url=http://www.daniweb.com/news/story233646.html]100-core processor[/url], Intel this week reported advances in [url=http://en.wikipedia.org/wiki/Phase-change_memory]phase-change memory (PCM)[/url], a type of non-volatile memory that is seen as a possible next-generation replacement for flash. In a joint [url=http://www.intel.com/pressroom/archive/releases/20091028corp.htm?iid=pr1_releasepri_20091028r]announcement[/url] yesterday with Swiss memory maker [url=http://www.numonyx.com/en-US/Pages/default.aspx]Numonyx[/url], the companies said they had …

0
148
Member Avatar for prsrose

Just recently bought more ram for my powermac g5 - Specs: Machine Name: Power Mac G5 Machine Model: PowerMac7,3 CPU Type: PowerPC G5 (3.1) Number Of CPUs: 2 CPU Speed: 2.3 GHz L2 Cache (per CPU): 512 KB Memory: 3.5 GB Bus Speed: 1.15 GHz If anything it seems slower …

0
128
Member Avatar for sunki

Hi, Is there any way to restrict the usage of memory of RAM used in the system? i.e. If i have a 1GB RAM used in a computer, can i restrict the OS to use only a part of the RAM (may be 256MB) and remaining as inaccessible, so that …

Member Avatar for Xlphos
0
184
Member Avatar for cwarn23

I'm not sure if this is possible but I'm kinda stuck in the middle. For my script I need to calculate the server load and the mysql cache usage both in percentage. Does anybody know of any scripts I can use for this. There are probably open source things that …

Member Avatar for cwarn23
0
257
Member Avatar for newsguy

John Tu is the President and Co-founder of Kingston Technology which just happens to be one of the biggest providers of memory products on the planet, so when he talks about trends and developments in the memory market a lot of people start listening. Especially when he does so against …

0
219
Member Avatar for happygeek

American chip maker [URL="http://www.freescale.com"]Freescale Semiconductor[/URL] has today announced the development of a magnetoresistive random-access memory (MRAM) chip which can maintain data using magnetic properties and not the traditional electrical charge methodology. Think of it in terms of storing data more like a hard drive, albeit a very small one indeed, …

Member Avatar for ShawnCplus
0
333

The End.