0

I have installed RHEL5.0 Server (Kernel 2.6.18-53.el5).
I am trying to connect Nokia series40 Mobile using DKE-2 Cable.
When I connect Mobile on one of the USB Port, Server gets hanged.
The entries in the log/messages are as follows

Apr 9 18:08:43 FAPC08010038-803 kernel: usb 1-2: new full speed USB device using uhci_hcd and address 5
Apr 9 18:08:43 FAPC08010038-803 kernel: usb 1-2: configuration #1 chosen from 1 choice
Apr 9 18:08:44 FAPC08010038-803 kernel: drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
Apr 9 18:08:44 FAPC08010038-803 kernel: cdc_acm 1-2:1.1: ttyACM0: USB ACM device
Apr 9 18:08:44 FAPC08010038-803 kernel: usbcore: registered new driver cdc_acm
Apr 9 18:08:44 FAPC08010038-803 kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
Apr 9 18:08:44 FAPC08010038-803 kernel: usbcore: registered new driver cdc_ether
Apr 9 18:08:44 FAPC08010038-803 kernel: rndis_host 1-2:1.9: RNDIS init failed, -110
Apr 9 18:08:44 FAPC08010038-803 kernel: usb%d: unregister 'rndis_host' usb-0000:00:1d.0-2, RNDIS device

Kindly help me out in this it is very urgent.

1
Contributor
1
Reply
2
Views
8 Years
Discussion Span
Last Post by punitdam
0

I have figured out the problem. It was a known bug on Redhat Bugzilla (228231), for old Kernel versions.
I have upgraded kernel to Kernel 2.6.18-92.1.6.el5 and now it is working fine as required.
Thanks:) .

This question has already been answered. Start a new discussion instead.
Have something to contribute to this discussion? Please be thoughtful, detailed and courteous, and be sure to adhere to our posting rules.