why do I get a bug of "view your network connectivity"yet all network connection is OK.

Dani AI

Generated

That notification is Windows flagging a change or problem it detected — not always a full outage. pointed to earlier troubleshooting threads, and and touched on client-side and server-side causes. The quickest way forward is a short, ordered checklist that pinpoints whether the problem is IP allocation, DNS, a virtual/VPN adapter, or the router/DHCP service.

Run these from an elevated Command Prompt and note the results (IP address, gateway, DNS servers, whether any address is 169.254.x.x):

ipconfig /all
ipconfig /release
ipconfig /renew
ipconfig /flushdns
nslookup www.google.com
ping -n 4 8.8.8.8
ping -n 4 <your_default_gateway_IP>
netsh winsock reset
netsh int ip reset

How to read the results and next steps: if the adapter shows 169.254.x.x, DHCP failed — restart router/DHCP server and re-run ipconfig /renew. If you can ping 8.8.8.8 but name lookups fail, change DNS temporarily to 8.8.8.8/1.1.1.1 to confirm a DNS issue. If the gateway is listed but not reachable, reboot the gateway and check cabling. If everything looks correct but the icon still warns, disable any virtual adapters (VMware/VirtualBox/Cisco clients), check proxy settings and the DHCP Client service, and update or reinstall the network driver.

Final checks: try another device or a phone hotspot to isolate router vs. PC; review System logs in Event Viewer for DHCP or TCPIP errors; avoid permanently disabling firewalls — temporarily disable only for testing. If the problem persists after these steps, capture ipconfig /all and a short Event Viewer excerpt to narrow the fault.

Recommended Answers

All 3 Replies

Are you using a VPN?

Check your server.

Be a part of the DaniWeb community

We're a friendly, industry-focused community of developers, IT pros, digital marketers, and technology enthusiasts meeting, networking, learning, and sharing knowledge.