No one has voted on any posts yet. Votes from other community members are used to determine a member's reputation amongst their peers.
5 Posted Topics
 | Your problem will have something to do with the LCD screen. Is this a screen you just had replaced or is this the original LCD panel? White screen usually means NO Data. I would say most likely the board on the back of the LCD is heating up or it …  |
| | Ha. Its sounds like you need an new inverter board. This board controls power to the backlight. If you look at the screen very carefully you will see the image. Sometimes it is so faint that you will need to shine a flashlight on it to see it. You LCD … |
| | If you are getting these lines when you first turn the machine on then you have a hardware issue for sure. |
| | Sounds like the lcd data connector is loose. You may want to pop it open and check the connection. You may want to untape it and reseat the plug before taping it again. This should fix your problem. If not then you must have something going on with the circuit … |
| | It sounds like a bad or loose cable. If thats not it you are looking at the LCD. This is all based on if the LCD does this from startup. Both items are tough to find. Let me know if you cant find anywhere and I can probably help you … |
The End.