Newbie to linux and trying to get modem to work with linuxe. Need Help
Below are ddumps of info on modem and system.
it seems that SUSE find the modem at the hardware level durning boot. But cannot figure out how to set it up in SUSE. Also get following message aft SUSE splash screen is displayed.
"Message from syslogd@linux at Thu Dec 16 16:01:19 2004 ...
linux kernel: Disabling IRQ #5"
Here is the output from various cmds and boot system log info
-------------------------------------------------------------
linux:/var/log # more boot.msg
----------------------------------
<6>ACPI: Using PIC for interrupt routing
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<6>PCI: Using ACPI for IRQ routing
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
<6>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
<4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:10.1 -> GSI 5 (level, low) -> IRQ 5
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<6>ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 10 (level, low) -> IRQ 10
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<6>ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 10 (level, low) -> IRQ 10
<6>ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6>Real Time Clock Driver v1.12
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<6>ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 5 (level, low) -> IRQ 5
<4>ttyS14 at I/O 0xd000 (irq = 5) is a 16550A
Configuring serial ports...
/dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A
/dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A
/dev/ttyS14 at 0xd000 (irq = 5) is a 16550A
Configured serial ports
done<notice>exit status of (setserial boot.proc) is
------------------------------
linux:~ # lspci -vv
0000:00:0a.0 Serial controller: 5610 56K FaxModem 56K FaxModem Model 5610 (rev 01) (prog-if 02 [16550])
Subsystem: 5610 56K FaxModem: Unknown device 00d3
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
-----------------------------------------
linux:~ # linux:~ # ls -mod
drwx------ 18 root 648 Nov 24 20:02 .
linux:~ # lsmod
Module Size Used by
usbserial 26856 0
parport_pc 37824 1
lp 10536 0
parport 37960 2 parport_pc,lp
nvram 8328 0
ipt_TOS 2560 14
ip6t_LOG 6656 17
ip6t_limit 2432 17
ipt_LOG 6912 30
ipt_limit 2432 30
ipt_pkttype 1792 2
speedstep_lib 4228 0
freq_table 4356 0
thermal 17928 0
processor 25640 1 thermal
fan 5380 0
button 8464 0
battery 11396 0
ac 6404 0
snd_pcm_oss 57896 0
snd_mixer_oss 19200 1 snd_pcm_oss
snd_via82xx 26276 2
snd_ac97_codec 69728 1 snd_via82xx
snd_pcm 96776 4 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 24708 1 snd_pcm
snd_page_alloc 10248 2 snd_via82xx,snd_pcm
gameport 4608 1 snd_via82xx
snd_mpu401_uart 7552 1 snd_via82xx
snd_rawmidi 24356 1 snd_mpu401_uart
snd_seq_device 8716 1 snd_rawmidi
snd 60164 12 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9056 1 snd
ip6t_state 2048 22
ip6_conntrack 38404 1 ip6t_state
ipt_state 2176 28
ip6t_REJECT 7552 3
ipt_REJECT 6784 3
iptable_mangle 2944 1
iptable_filter 3072 1
ip6table_mangle 2688 0
ip_nat_ftp 5232 0
iptable_nat 23980 1 ip_nat_ftp
ip_conntrack_ftp 72624 1 ip_nat_ftp
ip_conntrack 43512 4 ipt_state,ip_nat_ftp,iptable_nat,ip_conntrack_ftp
ip_tables 17664 9 ipt_TOS,ipt_LOG,ipt_limit,ipt_pkttype,ipt_state,ipt_REJECT,iptable_mangle,iptable_filter,iptable_nat
ip6table_filter 2816 1
ip6_tables 18816 6 ip6t_LOG,ip6t_limit,ip6t_state,ip6t_REJECT,ip6table_mangle,ip6table_filter
ipv6 237312 15 ip6_conntrack,ip6t_REJECT
edd 10012 0
joydev 9664 0
sg 35872 0
st 37404 0
sr_mod 16292 0
ide_cd 38176 0
cdrom 36508 2 sr_mod,ide_cd
ehci_hcd 29188 0
uhci_hcd 29712 0
via_agp 8960 1
agpgart 32168 1 via_agp
via_ircc 21520 0
irda 119484 1 via_ircc
crc_ccitt 2176 1 irda
subfs 7552 3
nls_utf8 2176 1
ntfs 91888 1
evdev 8960 0
via_rhine 19972 0
mii 4992 1 via_rhine
dm_mod 54524 0
usbcore 106724 5 usbserial,ehci_hcd,uhci_hcd
reiserfs 242000 1
aic7xxx 179768 0
sd_mod 16912 0
scsi_mod 111308 5 sg,st,sr_mod,aic7xxx,sd_mod
------------------------------------------
linux:~ linux:/proc # more ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0410-0415 : ACPI CPU throttle
0420-0423 : GPE0_BLK
0cf8-0cff : PCI conf1
c000-cfff : PCI Bus #01
c000-c0ff : 0000:01:00.0
d000-d007 : 0000:00:0a.0
d000-d007 : serial
d400-d4ff : 0000:00:0d.0
d800-d81f : 0000:00:10.0
d800-d81f : uhci_hcd
dc00-dc1f : 0000:00:10.1
dc00-dc1f : uhci_hcd
e000-e01f : 0000:00:10.2
e000-e01f : uhci_hcd
e400-e40f : 0000:00:11.1
e400-e407 : ide0
e408-e40f : ide1
e800-e8ff : 0000:00:11.5
e800-e8ff : VIA8233
ec00-ecff : 0000:00:12.0
ec00-ecff : via-rhine
linux:/proc # cd ..
cd
-----------------------
linux:/ # cd /proc
linux:/proc # more interrupts
CPU0
0: 685219 XT-PIC timer
1: 523 XT-PIC i8042
2: 0 XT-PIC cascade
5: 100000 XT-PIC uhci_hcd
9: 0 XT-PIC acpi
10: 0 XT-PIC uhci_hcd, VIA8233
11: 15 XT-PIC aic7xxx, uhci_hcd, ehci_hcd, eth0
12: 33951 XT-PIC i8042
14: 9428 XT-PIC ide0
15: 5325 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
------------------------------------------------
linux:/proc #
linux:/ # ls -l /dev/modems
total 176
drwxr-xr-x 2 root root 72 Nov 24 18:45 .
drwxr-xr-x 34 root root 180088 Nov 27 08:46 ..
crw-rw---- 1 root uucp 10, 219 Oct 2 04:38 mwave
linux:/ #
----------------------------
Getting popup message after SUSE splash screen is displayed
Message from syslogd@linux at Thu Dec 16 16:01:19 2004 ...
linux kernel: Disabling IRQ #5
_________________
Dick Beamish
