How can i convert amount like 400 as Four Hundred dollar only , any one can help me pls

0

No declarations at all.

1. Create a form and add two textboxes; TextBox1 and TextBox2

2. Add a command button; CommandButton1

3. Copy the code below to the code window.

4. Run the program, enter the number in TextBox1 and click CommandButton1...

```
Function Getword(strNumber)
Dim strtemp As String
Dim x, y, z As Integer
x = Val(Mid$(strNumber, 1, 1))
y = Val(Mid$(strNumber, 2, 1))
z = Val(Mid$(strNumber, 3, 1))
If Len(strNumber) = 1 Then
strtemp = strtemp + Whole(Val(strNumber))
GoTo 20
ElseIf Len(strNumber) = 2 Then
If x = 1 And y = 0 Then
strtemp = strtemp + " Ten"
ElseIf x = 1 And y = 1 Then
strtemp = strtemp + " Eleven"
GoTo 20
ElseIf x = 1 And y = 2 Then
strtemp = strtemp + " Twelve"
GoTo 20
ElseIf x = 1 And y > 2 Then
strtemp = strtemp + Whole2(y) + "een"
GoTo 20
ElseIf x = 0 And y > 0 Then
strtemp = strtemp + Whole(y)
GoTo 20
ElseIf x = 0 And y = 0 Then
strtemp = ""
GoTo 20
Else
strtemp = Whole2(x) + "y"
If y > 0 Then strtemp = strtemp + Whole(y)
GoTo 20
End If
ElseIf Len(strNumber) = 3 Then
If x > 0 Then strtemp = strtemp + Whole(x) + " Hundred"
If y = 1 And z > 2 Then
strtemp = strtemp + Whole2(z) + "een"
GoTo 20
ElseIf y = 1 And z = 1 Then
strtemp = strtemp + " Eleven"
GoTo 20
ElseIf y = 1 And z = 2 Then
strtemp = strtemp + " Twelve"
GoTo 20
ElseIf y = 1 And z = 0 Then
strtemp = strtemp + " Ten"
GoTo 20
ElseIf x = 0 And y = 0 And z = 0 Then
strtemp = ""
GoTo 20
Else
End If
If y > 0 Then strtemp = strtemp + Whole2(y) + "y"
If z > 0 Then strtemp = strtemp + Whole(z)
End If
20 Getword = strtemp
End Function
Function Whole(ByVal x As Integer)
Select Case x
Case Is = 9
Whole = " Nine"
Case 8
Whole = " Eight"
Case 7
Whole = " Seven"
Case 6
Whole = " Six"
Case 5
Whole = " Five"
Case 4
Whole = " Four"
Case 3
Whole = " Three"
Case 2
Whole = " Two"
Case 1
Whole = " One"
End Select
End Function
Function Whole2(ByVal x As Integer)
Select Case x
Case Is = 9
Whole2 = " Ninet"
Case 8
Whole2 = " Eight"
Case 7
Whole2 = " Sevent"
Case 6
Whole2 = " Sixt"
Case 5
Whole2 = " Fift"
Case 4
Whole2 = " Fourt"
Case 3
Whole2 = " Thirt"
Case 2
Whole2 = " Twent"
End Select
End Function
Private Sub CommandButton1_Click()
Dim bigstrNumber(11)
Dim strAdd As String
Dim strNumber As String
Dim strtemp As String
TextBox1 = Abs(Int(TextBox1))
strNumber = TextBox1.Text
TextBox2 = ""
bigstrNumber(0) = ""
bigstrNumber(1) = " Thousand"
bigstrNumber(2) = " Million"
bigstrNumber(3) = " Billion"
bigstrNumber(4) = " Trillion"
bigstrNumber(5) = " Quadrillion"
bigstrNumber(6) = " Pentillion"
bigstrNumber(7) = " Hexillion"
bigstrNumber(8) = " Qentillion"
bigstrNumber(9) = " Octillion"
bigstrNumber(10) = " Nonillion"
bigstrNumber(11) = " Decillion"
If Len(strNumber) > 3 Then
Do While i < 36
m = m + 1
i = i + 3
If i >= Len(strNumber) Then Exit Do
Loop
c = i - Len(strNumber)
If c > 0 Then
For D = 1 To c
strAdd = strAdd + "0"
Next D
Else
End If
strNumber = strAdd + strNumber
k = 1
For i = 1 To m
TextBox2 = TextBox2 & Getword(Mid$(strNumber, k, 3))
If Mid$(strNumber, k, 3) <> "000" Then TextBox2 = TextBox2 & bigstrNumber(m - i)
k = k + 3
Next i
Else
End If
TextBox2 = Trim$(TextBox2 & Getword(strNumber))
TextBox1 = Format$(TextBox1, "###,###,###,###,###,###,###,###,###,###,###,###")
End Sub
```

0

Converting Numeric Dollar Amounts into Text

This code will convert a numeric dollar amount into text for use in such applications as printing a check. I had to do this a couple of times in a previous life with a completely different operating system and programming language, but it is amazing how logic tends to be universal, regardless of language.

Beware: This code assumes a lot of things. It assumes that the input will be in a valid numeric format. So, either check the data before this routine begins, or put some kind of error handling in it. Also, it has an upper limit of $999,999.99 because many businesses want to limit the size of any one check. This should more properly be handled outside of this routine before an amount is ever passed to it.

For demonstration purposes I have put all of the code in the command button click event. Again, it may be more useful to have it as a function call or in a code library.

To use this routine, place two text boxes and one command button on a blank form. Text1 is where you enter the numeric dollar amount. You then click on the sommand button and Text2 is where the words will be displayed.

Copy and paste the following code into the form's general declarations

------------------

Private Sub Command1_Click()

'first set up two arrays to convert numbers to words

Dim BigOnes(9) As String

Dim SmallOnes(19) As String

'and populate them

BigOnes(1) = "Ten"

BigOnes(2) = "Twenty"

BigOnes(3) = "Thirty"

BigOnes(4) = "Forty"

BigOnes(5) = "Fifty"

BigOnes(6) = "Sixty"

BigOnes(7) = "Seventy"

BigOnes(8) = "Eighty"

BigOnes(9) = "Ninety"

SmallOnes(1) = "One"

SmallOnes(2) = "Two"

SmallOnes(3) = "Three"

SmallOnes(4) = "Four"

SmallOnes(5) = "Five"

SmallOnes(6) = "Six"

SmallOnes(7) = "Seven"

SmallOnes(8) = "Eight"

SmallOnes(9) = "Nine"

SmallOnes(10) = "Ten"

SmallOnes(11) = "Eleven"

SmallOnes(12) = "Twelve"

SmallOnes(13) = "Thirteen"

SmallOnes(14) = "Fourteen"

SmallOnes(15) = "Fifteen"

SmallOnes(16) = "Sixteen"

SmallOnes(17) = "Seventeen"

SmallOnes(18) = "Eighteen"

SmallOnes(19) = "Nineteen"

'format the incoming number to guarantee six digits

'to the left of the decimal point and two to the right

'and then separate the dollars from the cents

Text1.Text = Format(Text1.Text, "000000.00")

Dollars = Left(Text1.Text, 6)

Cents = Right(Text1.Text, 2)

Words = ""

'check to make sure incoming number is not too large

If Dollars > 999999 Then

Text2.Text = "Dollar amount is too large"

Exit Sub

End If

'separate the dollars into chunks

If Dollars = 0 Then

Words = "Zero"

Else

'first do the thousands

Chunk = Left(Dollars, 3)

If Chunk > 0 Then

GoSub ParseChunk

Words = Words & " Thousand"

End If

'do the rest of the dollars

Chunk = Right(Dollars, 3)

If Chunk > 0 Then

GoSub ParseChunk

End If

End If

'concatenate the cents and display

If Cents = 0 Then Cents = "No"

Words = Words & " and " & Cents & "/100"

Text2.Text = Words

Exit Sub

ParseChunk:

digits = Mid(Chunk, 1, 1)

If digits > 0 Then

Words = Words & " " & SmallOnes(digits) & " Hundred"

End If

digits = Mid(Chunk, 2, 2)

If digits > 19 Then

leftdigit = Mid(Chunk, 2, 1)

rightdigit = Mid(Chunk, 3, 1)

Words = Words & " " & BigOnes(leftdigit)

If rightdigit > 0 Then

Words = Words & " " & SmallOnes(rightdigit)

End If

Else

If digits > 0 Then

Words = Words & " " & SmallOnes(digits)

End If

End If

Return

End Sub

Avinash Rooge

avirooge@yahoo.com

This topic has been dead for over six months. Start a new discussion instead.

Recommended Topics

Basically what i am trying to achive here is as follows (I am very new to programming)

I have done the front end, ...

I developed Desktop application in C# .Net for client. client purchased software and installed it one than more system without my permission. How to restict him to not ...

I'm trying to convert the following C code to MIPS64 (very new to this):

```
If Im given the addresses: (a @ 100) (b @ 200) (c @ 300)
long int ...
```